Product Number | 3200 |
Qty./Pk | 1 / Pk |
Qty./Cs | 2 / Cs |
Brand | Corning® |
Cell Growth Area | 8500 cm² |
Flask Shape | Square |
Surface Treatment | TC-Treated |
Graduations | No |
Sterile | Yes |
Recommended Volume | 600 mL |
- Product Descriptions
- American English
This 8-page guide is designed to serve as a basic introduction to animal cell culture. It is appropriate for both laboratory workers who are using it for the first time or for those who interact with cell culture researchers and who want a better understanding of the key concepts, products and terminology in this interesting and rapidly growing field.
- Application Notes
- American English
- PDF (754.5 kB)
- CLS-AN-042
This guide will help you better understand the steps you can take to reduce your cultures' FBS levels and assist you in cost savings.
- Application Notes
- American English
- PDF (213.1 kB)
- CLS-AN-074
- Application Notes
- American English
- PDF (643.2 kB)
- CLS-AN-084
Scientific progress in the cell and gene therapy field will require cell culture platforms that meet increasing demands for cell yield. The Corning CellCube system provides a simple, compact, and scalable method for mass culture of attachment-dependent cells. To adequately condition the medium during the expansion process, the CellCube system is paired with a bioreactor controller system. In the current study, the CellCube 100-layer module was paired with the Eppendorf BioFlo® 120 with a BioBLU® 3c single-use bioreactor for expansion of two commonly used bioproduction cell lines – HEK293T and Vero. Final harvest yields for both HEK293T and Vero cell lines greater than 10 billion cells demonstrate the utility of the CellCube system for mass culture of adherent cell lines with efficient medium usage.
- Application Notes
- American English
- PDF (414.8 kB)
- CLS-AN-568 REV2
This study establishes basic cell culture parameters for expansion of DF-1 cells in the Corning CellCube System—a compact and scalable method for mass culture of attachment-dependent cells.
- Application Notes
- American English
- PDF (358.4 kB)
- CLS-AN-734
This is a troubleshooting guide for cell culture contamination and includes common cell culture contaminants, their sources, detection, and prevention.
- Application Notes
- American English
- PDF (69.1 kB)
- CLS-CG-TS-077 REV2
Contamination of cell cultures has long been a serious problem for researchers as well as for manufacturers producing cell-based parenteral (for injection) drug products. In the past, most efforts for avoiding contamination-induced culture losses have focused on biological contaminants: bacteria, mycoplasmas, yeasts, fungi, and even other cell lines.
- Application Notes
- American English
- PDF (442.8 kB)
- CLS-TC-305
Contamination of cell cultures has long been a serious problem for researchers as well as for manufacturers producing cell-based parenteral (for injection) drug products. In the past, most efforts for avoiding contamination-induced culture losses have focused on biological contaminants: bacteria, mycoplasmas, yeasts, fungi, and even other cell lines.
- Application Notes
- American English
- PDF (450.8 kB)
- CLS-TC-305
- Equipment Manuals
- American English
- PDF (607.0 kB)
- CLS-BP-011W
- FAQS
- American English
- PDF (204.2 kB)
- CLS-AN-748
- FAQS
- American English
- PDF (81.9 kB)
- CLS-DIV-039 EU
- FAQS
- American English
- PDF (80.8 kB)
- CLS-DIV-039
Updated August 22, 2023
- SDS
- American English
- PDF (50.6 kB)
CellCube modules are ideal for producing: - large amounts of cells or recombinant proteins - viral vaccines - vectors for gene therapy
- Product Information Sheets
- American English
- PDF (368.0 kB)
- CLS-BP-010
The Corning CellCube system provides a compact, perfusionbased method for the mass culture of attachment-dependent cells. CellCube modules consist of a series of 10, 25, or 100 parallel, polystyrene plates joined to create thin, sealed laminar flow spaces between adjacent plates. CellCube modules are available with either a Tissue Culture-treated growth surface or Corning CellBIND® surface for cell attachment. The surface treatment is applied to both sides of each layer to achieve available surface area ranging from 8,500 cm2 to 85,000 cm2 in a compact footprint.
- Product Information Sheets
- American English
- PDF (190.0 kB)
- CLS-BP-039 REV1
This 4-page protocol provides a detailed procedure for cryogenically storing a variety of animal cells.
- Protocols
- American English
- PDF (183.9 kB)
- CLS-AN-023 Rev2
This 3-page protocol provides a detailed procedure for using Hoechst stain 33258 to stain the DNA in cell monolayers for detecting mycoplasmas or other prokaryotic organisms.
- Protocols
- American English
- PDF (149.8 kB)
- CLS-AN-025
This 4-page protocol provides a detailed procedure for subculturing attached cells using enzymatic dissociation. It explains the theory behind some of the keys steps in the process.
- Protocols
- American English
- PDF (156.6 kB)
- CLS-AN-026 REV3
This document provides a generalized recommended procedure for chemical-based DNA transfection using PEIpro transfection reagent in the Corning CellCube 25-layer module (Corning Cat. No. 3201). PEIpro transfection reagent (Polyplus Transfection Cat. No. 115-100) is a leading chemically defined linear polyethylenimine optimized for large-scale virus production in common mammalian producer cell lines. The transfection protocol described is intended as a starting point for those wishing to transfect large numbers of cells in the Corning CellCube System, especially for viral production.
- Protocols
- American English
- PDF (318.5 kB)
- CLS-AN-637DOC REV1
Updated November 21, 2024
- Quality and Regulatory Letters
- American English
- PDF (133.2 kB)
Corning Life Sciences offers an extensive selection of vessels and closed system solutions for scaling-up both anchorage-dependent and suspension cells. Corning cell culture products are manufactured under strict process controls to deliver consistent product performance.
- Selection Guides
- American English
- PDF (6.3 MB)
- CLS-BP-028
Corning Life Sciences offers a full line of cell culture products that are manufactured under strict process controls guaranteeing consistent product performance.
- Selection Guides
- American English
- PDF (9.7 MB)
- CLS-CC-010 EU
- Selection Guides
- American English
- PDF (8.7 MB)
- CLS-CC-010
- Selection Guides
- Portuguese
- PDF (7.1 MB)
- CLS-BP-028 PRT
Corning CellCube システムは、接着依存性細胞の大量培養を実現するコンパクトな灌流ベースの培養容器です。CellCube モジュールには、細胞培養(TC)用処理を施した表面または細胞接着を強化したCorning CellBIND® 表面があります。セルキューブシステムは、コンパクトな設置スペースでありながら、利用可能な表面積は8,500cm² ~ 85,000 cm² になります。細胞の生産性を高めるために、新鮮な培地で絶えず細胞を灌流します。静置培養よりもin vivo 条件をより忠実に再現する環境を提供します。
- Brochures
- Japanese
- PDF (242.5 kB)
- CLS-355-00
- Quality Certificate - Lot No.19824043
- Quality Certificate - Lot No.05024009
- Quality Certificate - Lot No.00924036
- Quality Certificate - Lot No.29623022
- Quality Certificate - Lot No.13923031
- Quality Certificate - Lot No.13622008
- Quality Certificate - Lot No.34021019
- Quality Certificate - Lot No.22821014
- Quality Certificate - Lot No.01520012
- Quality Certificate - Lot No.17819058
- Quality Certificate - Lot No.03919049
- Quality Certificate - Lot No.28917055
- Quality Certificate - Lot No.18117010
- Quality Certificate - Lot No.12917040
- Quality Certificate - Lot No.05917056
- Quality Certificate - Lot No.03017045
- Quality Certificate - Lot No.34115038
- Quality Certificate - Lot No.17414013
- Quality Certificate - Lot No.09814033
- Quality Certificate - Lot No.28013026
- Quality Certificate - Lot No.16413048
- Quality Certificate - Lot No.26812043
- Quality Certificate - Lot No.20112016
- Quality Certificate - Lot No.18910010
- Quality Certificate - Lot No.12409025
- Quality Certificate - Lot No.Generic