T1T212ZB1D1E250F-P
Evolv® Multifiber Pushlok® Assembly Multifiber Pushlok® Female to Multifiber Pushlok® Male, 12 fibers, SST Drop Toneable, 250 Ft. individual packaging
General Specifications
| Product Number | T1T212ZB1D1E250F-P |
| Cable Assembly Type | Multifiber Pushlok® Extender |
| Environment | Outdoor |
| Packaging | Individual Pack |
| Termination | Both ends |
Standards
| RoHS | Free of hazardous substances according to RoHS 2011/65/EU |
Environmental Conditions
| Temperature Range, Installation | -30 °C to 70 °C (-22 °F to 158 °F ) |
| Temperature Range, Operation | -40 °C to 70 °C (-40 °F to 158 °F ) |
| Temperature Range, Storage | -40 °C to 70 °C (-40 °F to 158 °F ) |
Design
| Fiber Count | 12 |
| Fiber Type | Single-mode |
Mechanical Specifications
| Max. Tensile Strength, Short-Term | 1350 N |
| Max. Tensile Strength, Long-Term | 400 N |
| Max. Tensile Strength for Installation | 1350 N |
| Min. Bend Radius Installation | 135 mm |
| Cold Mate/Demate | -40 °C (-40 °F) |
| Axial Pull, Plug to Cable, Through the Dust Cap | 222.41 N (50 lb) in axial pull with load applied to the dust cap |
| Nominal Outer Diameter | 0 mm |
Specifications - Connector A
| Connector Type | No connector |
Specifications - Connector B
| Insertion Loss, Max. | 0.35 dB |
| Connector Type | Multifber Pushlok |
| Reflectance | ≤ -65 dB |
Furcation - Connector A
| Leg Length | 0 mm |
Furcation - Connector B
| Leg Length | 0 mm |
Pulling Grip - Connector B
| Grip Outer Diameter | 0.69 in |
Dimensions
| Length | 0 mm |
Ordering Information
| Units per Delivery | 1/1 |