T24412EB4D1E010F-P
Evolv® Multifiber Pushlok® Assembly Multifiber Pushlok® Male to SCAPC assembliy, 12 fibers, SST Drop Dielectric, 10 F, individual packaging
General Specifications
| Product Number | T24412EB4D1E010F-P |
| Cable Assembly Type | Multifiber Pushlok® Assembly |
| Environment | Outdoor |
| Cable Type | SST-Drop™ FREEDM LSZH Riser Cable |
| Packaging | Individual Pack |
| Termination | Both ends |
Standards
| RoHS | Free of hazardous substances according to RoHS 2011/65/EU |
Environmental Conditions
| Temperature Range, Installation | -30 °C to 70 °C (-22 °F to 158 °F ) |
| Temperature Range, Operation | -40 °C to 70 °C (-40 °F to 158 °F ) |
| Temperature Range, Storage | -40 °C to 70 °C (-40 °F to 158 °F ) |
Design
| Fiber Count | 12 |
| Fiber Type | Single-mode |
Mechanical Specifications
| Max. Tensile Strength, Short-Term | 1300 N |
| Max. Tensile Strength, Long-Term | 400 N |
| Max. Tensile Strength for Installation | 1300 N |
| Crush Resistance | 1000 N/10 cm |
| Min. Bend Radius Installation | 92 mm |
| Min. Bend Radius Operation | 40 mm |
| Cold Mate/Demate | -40 °C (-40 °F) |
| Axial Pull, Plug to Cable, Through the Dust Cap | 222.41 N (50 lb) in axial pull with load applied to the dust cap |
| Nominal Outer Diameter | 0 mm |
Specifications - Connector A
| Insertion Loss, Max. | 0.35 dB |
| Connector Type | Multifber Pushlok |
| Reflectance | ≤ -65 dB |
Specifications - Connector B
| Insertion Loss, Max. | 0.35 dB |
| Connector Type | SC APC |
| Reflectance | ≤ -65 dB |
Furcation - Connector A
| Leg Length | 0 mm |
Furcation - Connector B
| Leg Length | 0 mm |
Pulling Grip - Connector B
| Grip Outer Diameter | 0.48 in |
Dimensions
| Length | 0 mm |
Ordering Information
| Units per Delivery | 1/1 |