G9379E4QPNCLZ100F
EDGE™ MTP® Trunk 144F, 50 µm multimode (OM4), 100 ft
通用规范
| 产品编码 | G9379E4QPNCLZ100F |
| Flame Rating | Plenum (OFNP) |
| Fiber Category | 50 µm MM (OM4) |
| Cable Assembly Type | EDGE™ Trunk |
| Environment | Indoor |
| Cable Type | Indoor: ANSI/ICEA S-83-596 |
| Pulling grip | Yes |
| Connector Assembly Type | MTP to LC |
标准
| 光纤标准 | IEC 60793-2-10 适用于 A1a 类 50/125 多模光纤 |
| RoHS | 无有害物质根据RoHS 2011/65/EU |
| 认证和产品 | NFPA 262, National Electrical Code® (NEC®), OFNP, CSA FT-6 |
环境条件
| 温度范围，操作 | -10 °C - 60 °C (14 °F - 140 °F ) |
Design
| Fiber Count | 144 |
| Polarity | Universal Hybrid Extender |
| Fiber Type | Multimode |
机械特性
| 标称外径 | 12.5 mm |
| 最大安装拉伸强度 | 445 N |
| 最小安装弯曲半径 | 187.5 mm |
| 最小操作弯曲半径 | 62.5 mm |
| 带18-in弯头的最小管道尺寸 | 77 mm |
Optical Characteristics
| Fiber Code | T |
| Performance Option Code | 90 |
| Fiber Category | OM4 |
| Fiber Type | Multimode |
| Fiber Name | 50 µm MM (OM4) |
| Maximum Attenuation | 2.8 dB/km / 1.0 dB/km |
| Wavelengths | 850 nm / 1300 nm |
| Fiber Compliance | IEC 60793-2-10 |
| Fiber Core Diameter | 50 µm |
| Serial 1 Gigabit Ethernet | 1000 m / 600 m |
| Serial 10 Gigabit Ethernet | 550 m / - |
| Minimum Effective Modal Bandwidth (EMB) | 4700 MHz*km / - |
| Min. Overfilled Launch (OFL) Bandwidth | 3500 MHz*km / 500 MHz*km |
Specifications - Connector A
| Insertion Loss, Max. | 0.25 dB |
| Boot Color | Black |
| Connector Type | MTP® (pinned) |
| Ferrule Material | Composite |
| Reflectance | < -20 dB |
Specifications - Connector B
| Insertion Loss, Max. | 0.15 dB |
| Boot Color | Aqua |
| Connector Type | LC Uniboot |
| Ferrule Material | Ceramic |
| Reflectance | < -20 dB |
拉环 - 连接器 A
| 拉手 | 是 |
| 拉伸强度 | 440 N |
| Grip Outer Diameter | 56 mm |
拉环 - 连接器 B
| 最小管道直径 | 76 mm |
尺寸
| 长度 | 100 ft |
| Cable Weight | 121 kg/km |
订购信息
| 包装方法 | 塑料卷轴 |
| Reel Diameter | 23.5 in |
| Reel Width | 5 in |
| 每次交付的单元数 | 1/1 |
分支 - 连接器 A
| 分支长度 | 1524 mm -0 / +76mm |
| 分支类型 | EDGE™ 尺寸 2, 20 mm x 20 mm x 108.6 mm |
| 分支颜色 | 水蓝色 |
| 分支直径 | 2 mm |
| 分支数 | 12 |
分支 - 连接器 B
| 分支类型 | PnP 尺寸 1 |
| Leg Diameter | 2 mm |
| Leg Length | 914 mm |
Snap-in strain-relief clips
Provide easier cable management
Small outer diameter
Improves cable tray fill ratio and allows for imported airflow
Low-loss connectivity
Enables system design flexibility
Bend-improved fiber
Allows tighter cable bends for slack storage and routing, less risk of downtime due to pinched or bent cables
Fiber optic trunk cable manufactured with Corning® CleanAdvantage™ technology and optimized dust cap
Eliminates the need for scoping and cleaning prior to initial field connection
Non-pinned MTP connectors on both ends
Fiber optic trunks designed to interface with the EDGE solutions or Plug & Play™ systems modules