DE5E5K2QLZDDU030M
EDGE8® MTP® Trunk Cable 50 µm multimode (OM4), 8F MTP (pinned) Connector to 8F MTP (pinned) Connector, 192F, with 840 mm legs, pulling grip both sides, 30 m
General Specifications
| Product Number | DE5E5K2QLZDDU030M |
| Catégorie de fibre optique | 50 µm MM (OM4) |
| Type d'assemblage de câble | Trunk EDGE8® |
| Type de câble | Interconnecter |
Normes
| Comportement au Feu | Cca, s1b, d1, a1 |
| RoHS | Ne contient aucune substance dangereuse au sens de la directive RoHS 2011/65/EU |
| Critères de conception et de test | ANSI/ICEA S-83-596 |
| Compatibilité | TIA/EIA-604-5 / TIA/EIA-604-5 |
Environmental Conditions
| Temperature range, installation | -5 °C to 50 °C |
| Temperature range, operation | -10 °C to 60 °C |
| Temperature range, storage | -25 °C to 70 °C |
Conception
| Nombre de fibres | 192 |
| Matériau de la gaine externe | LSZH/FRNC |
| Type de fibre | Multimode |
Caractéristiques mécaniques
| Résistance à la traction | 440 N |
| Résistance à la compression (réversible) | 1000 N/10 cm |
| Rayon de courbure minimal à l'installation | 240 mm |
| Rayon de courbure minimal en fonctionnement | 80 mm |
Optical Characteristics
| Fiber Code | T |
| Performance Option Code | 98 |
| Fiber Category | OM4 |
| Fiber Type | Multimode |
| Fiber Name | 50 µm MM (OM4) |
| Maximum Attenuation | 2.8 dB/km / 1.0 dB/km |
| Wavelengths | 850 nm / 1300 nm |
| Fiber Compliance | IEC 60793-2-10 |
| Fiber Core Diameter | 50 µm |
| Cladding diameter | 125 µm |
| Coating diameter | 242 µm |
| Serial 1 Gigabit Ethernet | 1000 m / 600 m |
| Serial 10 Gigabit Ethernet | 550 m / - |
| Minimum Effective Modal Bandwidth (EMB) | 4700 MHz*km / - |
| Min. Overfilled Launch (OFL) Bandwidth | 3500 MHz*km / 500 MHz*km |
Specifications - Connector A
| Insertion loss, typical | 0.35 dB |
| Insertion loss, max. | 0.35 dB |
| Note: | *IL in preconnectorized products is measured in the factory through two mated pairs. |
| Tensile strength jacketed cable | 44 N |
| Durability | ≤ 0.2 dB change, 200 rematings, FOTP-21 |
| Keyed (security) | No |
| Boot colour | Black |
| Connector type | MTP® (pinned) |
| Ferrule material | Composite |
| Housing colour | Turquoise |
| Housing material | Composite |
| Boot type | Individual |
| Reflectance | ≤ -20 dB |
Specifications - Connector B
| Insertion loss, typical | 0.35 dB |
| Insertion loss, max. | 0.35 dB |
| Note: | *IL in preconnectorized products is measured in the factory through two mated pairs. |
| Tensile strength jacketed cable | 44 N |
| Durability | ≤ 0.2 dB change, 200 rematings, FOTP-21 |
| Keyed (security) | No |
| Couleur du boot | Noir |
| Type de connecteur | MTP® (mâle) |
| Matériau de la férule | Composite |
| Couleur Boîtier | Turquoise |
| Matériau du boîtier | Composite |
| Réflectance | ≤ -20 dB |
Furcation - Connector A
| Staggering legs per group | 6 |
| Leg Length | 840 mm -0 / +140mm |
| Leg diameter | 2 mm |
| Staggering increment | 100 mm |
| Shortest staggering leg length (mm) | 840 mm |
| Plug Type | Heat shrink |
| Leg count | 24 |
| Plug Height | 15 mm |
| Plug Width | 15 mm |
| Plug Depth | 170 mm |
Furcation - Connector B
| Leg diameter | 2 mm |
| Staggering increment | 100 mm |
| Shortest staggering leg length (mm) | 840 mm |
| Plug Type | Heat shrink |
| Leg count | 24 |
| Plug Height | 15 mm |
| Plug Width | 15 mm |
| Plug Depth | 170 mm |
| Staggering legs per group | 6 |
| Leg Length | 840 mm -0 / +140mm |
Pulling Grip - Connector A
| Poignée de tirage | Oui |
| Résistance à la traction | 440 N |
| Diamètre minimal de la conduite | 980 mm |
Pulling Grip - Connector B
| Poignée de tirage | Oui |
| Résistance à la traction | 660 N |
| Diamètre minimal de la conduite | 980 mm |
Dimensions
| Longueur | 30 m |
| Diamètre extérieur | 15 mm |
Informations pour commander
| Contenu du colis | 2x U-clip 2nd generation, test report |
| Méthode d'emballage | Touret en plastique |
| Unités par livraison | 1/1 |
Snap-in strain-relief clips
Provide easier cable management
Small outer diameter
Improves the cable tray fill ratio and allows for improved airflow
Low-loss connectivity
Enables system design flexibility
Bend-improved fiber
Allows tighter cable bends for slack storage and routing, less risk of downtime due to pinched or bent cables
Corning® CleanAdvantage™ technology and optimized dust cap
Eliminates the need for scoping and cleaning prior to initial field connection