GE2E224QLZDDU020M
EDGE8® MTP® Trunk Cable 50 µm multimode (OM4), 8F MTP PRO X (pinned) Connector to 8F MTP PRO X (pinned) Connector, 24F, with 840 mm legs, tool-less pulling grip one side, 20 M
Spécifications générales
| Référence du produit | GE2E224QLZDDU020M |
| Flame rating | LSZH/FRNC |
| Fibre category | 50 µm MM (OM4) |
| Cable assembly type | EDGE8® Trunk |
| Environment | Indoor |
| Application | Data Centre LAN/SAN |
| Cable Type | Interconnect |
| Brand | EDGE8® |
Standards
| Reaction to Fire | Cca, s1b, d1, a1 |
| RoHS | Free of hazardous substances according to RoHS 2011/65/EU |
| Design And Test Criteria | ANSI/ICEA S-83-596 |
| Intermateability | TIA/EIA-604-5 / TIA/EIA-604-5 |
Environmental Conditions
| Temperature range, installation | 0 °C - 50 °C (32 °F - 122 °F ) |
| Temperature range, operation | -10 °C - 60 °C (14 °F - 140 °F ) |
| Temperature range, storage | -25 °C - 70 °C (-13 °F - 158 °F ) |
Design
| Fibre count | 24 |
| Outer jacket material | LSZH/FRNC |
| Polarity | Universal, TIA-568 type-B |
| Fibre Type | Multimode |
Mechanical Characteristics
| Tensile strength | 440 N |
| Nominal outer diameter | 7.2 mm ± 0.3mm |
| Crush resistance | 1000 N/10 cm |
| Min. bend radius installation | 144 mm |
| Min. bend radius operation | 72 mm |
Optical Characteristics
| Fibre code | T |
| Performance option code | 98 |
| Fibre category | OM4 |
| Fibre Type | Multimode |
| Fibre name | 50 µm MM (OM4) |
| Maximum Attenuation | 2.8 dB/km / 1.0 dB/km |
| Wavelengths | 850 nm / 1300 nm |
| Fibre compliance | IEC 60793-2-10 |
| Fibre core diameter | 50 µm |
| Cladding diameter | 125 µm |
| Coating diameter | 242 µm |
| Serial 1 gigabit ethernet | 1000 m / 600 m |
| Serial 10 gigabit ethernet | 550 m / - |
| Minimum effective modal bandwidth (EMB) | 4700 MHz*km / - |
| Min. overfilled launch (OFL) bandwidth | 3500 MHz*km / 500 MHz*km |
Specifications - Connector A
| Polish | APC |
| Insertion loss, typical | 0.35 dB |
| Insertion loss, max. | 0.35 dB |
| Note: | *IL in preconnectorized products is measured in the factory through two mated pairs. |
| Tensile strength jacketed cable | 44 N |
| Durability | ≤ 0.2 dB change, 200 rematings, FOTP-21 |
| Keyed (security) | No |
| Boot colour | Black |
| Connector type | MTP PRO X® (pinned) |
| Ferrule material | Composite |
| Housing colour | Green |
| Housing material | Composite |
| Boot type | Individual |
| Reflectance | < -20 dB |
Specifications - Connector B
| Polish | APC |
| Insertion loss, typical | 0.35 dB |
| Insertion loss, max. | 0.35 dB |
| Note: | *IL in preconnectorized products is measured in the factory through two mated pairs. |
| Tensile strength jacketed cable | 44 N |
| Durability | ≤ 0.2 dB change, 200 rematings, FOTP-21 |
| Keyed (security) | No |
| Boot colour | Black |
| Connector type | MTP PRO X® (pinned) |
| Ferrule material | Ceramic |
| Housing colour | Green |
| Housing material | Composite |
| Boot type | Individual |
| Reflectance | < -20 dB |
Furcation - Connector A
| Staggering legs per group | 6 |
| Leg Length | 840 mm -0 / +840mm |
| Furcation type | EDGE™ size 1, 14.7 mm x 14.7 mm x 108.6 mm |
| Leg colour | Turquoise |
| Leg diameter | 2 mm |
| Staggering increment | 100 mm |
| Shortest staggering leg length (mm) | 840 mm |
| Plug Type | Size 2 EDGE™ |
| Leg count | 3 |
| Plug Height | 14.7 mm |
| Plug Width | 20 mm |
| Plug Depth | 108.6 mm |
Furcation - Connector B
| Furcation type | EDGE™ size 1, 14.7 mm x 14.7 mm x 108.6 mm |
| Leg colour | Turquoise |
| Leg diameter | 2 mm |
| Staggering increment | 100 mm |
| Shortest staggering leg length (mm) | 840 mm |
| Plug Type | Size 2 EDGE™ |
| Leg count | 3 |
| Plug Height | 14.7 mm |
| Plug Width | 20 mm |
| Plug Depth | 108.6 mm |
| Staggering legs per group | 6 |
| Leg Length | 840 mm -0 / +840mm |
Pulling grip - Connector A
| Pulling grip | Yes |
| Tensile strength | 440 N |
| Grip Outer Diameter | 54 mm |
Pulling grip - Connector B
| Tensile strength | 440 N |
| Min. Duct Size Diameter | 64 mm |
Dimensions
| Length | 20 m |
| Weight | 43 kg |
Ordering Information
| Package contents | 2x EDGE™ clips size 2 single stack, 2x EDGE clips size 2 double stack, 2x EDGE U-clips size 2, a printed test report and SRP |
| Packaging method | Plastic reel |
| Units per delivery | 1/1 |
Snap-in strain-relief clips
Provide easier cable management
Small outer diameter
Improves the cable tray fill ratio and allows for improved airflow
Low-loss connectivity
Enables system design flexibility
Bend-improved fibre
Allows tighter cable bends for slack storage and routing, less risk of downtime due to pinched or bent cables
Corning® CleanAdvantage™ technology and optimised dust cap
Eliminates the need for scoping and cleaning prior to initial field connection