D10201JB49R050M-P
Evolv® ROC™ Drop with Pushlok® Technology 1F Pushlok to LC Simplex, Dielectric, 50 m, individual packaging
通用规范
| 产品编码 | D10201JB49R050M-P |
| 光缆类型 | ROC™ 落线 |
| 组件插入损耗 | ≤ 0.4 dB |
| Connector Assembly Type | Pushlok LC Simplex |
| 包装 | 单个包装 |
标准
| RoHS | 无有害物质根据RoHS 2011/65/EU |
设计
| 光纤芯数 | 1 |
光学特性
| 光纤代码 | J |
| 性能选项代码 | 22 |
| 光纤类别 | OS2 |
| 光纤类型 | Single-mode (OS2) / 250 µm |
| 光纤名称 | ClearCurve® LBL |
| 最大衰减 | 0.36 dB/km / 0.36 dB/km / 0.22 dB/km |
| 波长 | 1310 nm / 1383 nm / 1550 nm |
| 光纤符合性 | ITU-T G.652.D and ITU-T G.657.A2/B2 |
| 光纤纤芯直径 | 8.2 µm |
| 包层直径 | 125 µm |
| 涂层直径 | 242 µm |
| Dispersion @ 1550 nm | ≤ 18 [ps/(nm*km)] |
| Dispersion @ 1625 nm | ≤ 23 [ps/(nm*km)] |
| 在1550nm 7.5mm 半径下的光纤弯曲性能 | ≤ 0.4 dB/turn |
| 光缆截止波长 | 1260 nm |
| 在1310nm的模场直径 | 8.6 µm |
| 1550nm的模场直径 | 9.6 µm |
| PMD链路设计值 | ≤ 0.06 ps/√km |
| PMD最大单独光纤 | ≤ 0.2 ps/√km |
| 并行光40G以太网 | 150 m / - |
Specifications - Connector A
| 插入损耗，最大 | 0.4 dB |
| 连接器类型 | Pushlok |
| 反射 | ≤ -65 dB |
Specifications - Connector B
| 插入损耗，最大 | 0.4 dB |
| 连接器类型 | LC |
| 尾套类型 | Simplex |
| 反射 | ≤ -65 dB |
尺寸
| 长度 | 50 m |
订购信息
| 包装方法 | 盒 |
| 每次交付的单元数 | 1/1 |
Hardened connector technology
Reduced-diameter Pushlok® connector
Reduced optimized cable cross-section
Smaller profile and bend radius; flexibility allows for increased slack storage capacity in existing optical network terminals (ONTs), pedestals, and handholes
Robust design
Designed for rapid connection to external flush-mounted bulkhead adapters on terminals or closures
Flexible connector offerings
Dual-ended or pigtailed versions to accommodate any ONT interface
Hybrid assemblies with hardened connector (terminal) to SC APC (ONT) are available with both OptiTap and Pushlok variants
1F small cell variants with a Pushlok hardened connector to LC or Uniboot
Versatile installation environments
Aerial: dielectric, self-supporting at 40 lbs installation tension at 150 ft (NESC Heavy), 255 ft (NESC Medium) or 330 ft (NESC Light)
Direct-buried: toneable for easy locating
Duct: integral pulling eye/connector cap designed for 100 lb maximum pulling tension; Pushlok connector is suitable for 13 mm inner diameter duct