GE7E7E4GLZDDU030M
EDGE8® MTP® Trunk Bend-improved single-mode (OS2 ), 8F MTP (pinned) Connector to 8F MTP (pinned) Connector, 144F, with 840 mm legs, tool-less pulling grip one side, 30 m
General Specifications
| Product Number | GE7E7E4GLZDDU030M |
| Fiber Category | Bend-improved SM (OS2) |
| Cable Assembly Type | EDGE8® Trunk |
| Cable Type | Interconnect |
Standards
| Reaction to Fire | Cca-s1b, d1, a1 |
| RoHS | Free of hazardous substances according to RoHS 2011/65/EU |
| Design and Test Criteria | ANSI/ICEA S-83-596 |
| Intermateability | TIA/EIA-604-5 / TIA/EIA-604-5 |
Condições ambientais
| Faixa de temperatura, instalação | -5 °C to 50 °C (23 °F to 122 °F ) |
| Faixa de temperatura, operação | -10 °C to 60 °C (14 °F to 140 °F ) |
| Faixa de temperatura, armazenamento | -25 °C to 70 °C (-13 °F to 158 °F ) |
Design
| Fiber Count | 144 |
| Outer Jacket Material | LSZH/FRNC |
| Polarity | Universal, TIA-568 Type-A |
| Fiber Type | Single-mode |
Mechanical Specifications
| Tensile Strength | 440 N |
| Crush Resistance | 1000 N/10 cm |
| Min. Bend Radius Installation | 210 mm |
| Min. Bend Radius Operation | 70 mm |
Especificações - Conector A
| Perda por inserção, típica | 0,35 dB |
| Perda por inserção, máx. | 0,35 dB |
| Nota: | *IL in preconnectorized products is measured in the factory through two mated pairs. |
| Resistência à tração do cabo revestido | 44 N |
| Durabilidade | ≤ 0,2 dB de alteração, 200 reacoplamentos, FOTP-21 |
| Codificado (segurança) | Não |
| Boot Color | Black |
| Connector Type | MTP® (pinned) |
| Ferrule Material | Composite |
| Housing Color | Green |
| Housing Material | Composite |
| Boot Type | Individual |
| Reflectance | ≤ -65 dB |
Specifications - Connector B
| Polish | APC |
| Insertion Loss, Typical | 0.35 dB |
| Insertion Loss, Max. | 0.35 dB |
| Note: | *IL in preconnectorized products is measured in the factory through two mated pairs. |
| Tensile Strength Jacketed Cable | 44 N |
| Durability | ≤ 0.2 dB change, 200 rematings, FOTP-21 |
| Keyed (security) | No |
| Boot Color | Black |
| Connector Type | MTP® (pinned) |
| Ferrule Material | Composite |
| Housing Color | Green |
| Housing Material | Composite |
| Boot Type | Individual |
| Reflectance | ≤ -65 dB |
Furcation - Connector A
| Staggering Legs per Group | 5 |
| Leg Length | 840 mm -0 / +140mm |
| Leg Diameter | 2 mm |
| Staggering Increment | 100 mm |
| Shortest Staggering Leg Length (mm) | 840 mm |
| Tipo de plugue | Termorretrátil |
| Contagem de pernas | 18 |
| Altura do plugue | 13,4 mm |
| Largura do plugue | 13,4 mm |
| Profundidade do plugue | 170 mm |
Furca - Conector B
| Diâmetro do terminal | 2 mm |
| Incremento do escalonamento | 100 mm |
| Comprimento mais curto das pernas escalonadas (mm) | 840 mm |
| Tipo de plugue | Termorretrátil |
| Altura do plugue | 13,4 mm |
| Largura do plugue | 13,4 mm |
| Profundidade do plugue | 170 mm |
| Pernas escalonadas por grupo | 5 |
| Comprimento da perna | 840 mm |
Pulling Grip - Connector A
| Pulling grip | Yes |
| Tensile Strength | 440 N |
| Grip Outer Diameter | 52 mm |
Pulling Grip - Connector B
| Tensile Strength | 440 N |
| Min. Duct Size Diameter | 980 mm |
Dimensions
| Length | 30 m |
| Outer Diameter | 13.4 mm |
Ordering Information
| Package Contents | 2x U-clip 2nd generation, test report |
| Packaging Method | Plastic reel |
| Units per Delivery | 1/1 |
Snap-in strain-relief clips
Provide easier cable management
Low-loss connectivity
Enables system design flexibility
Small outer diameter
Improves cable tray fill ratio and allows for imported airflow
Bend-improved fiber
Allows tighter cable bends for slack storage and routing, less risk of downtime due to pinched or bent cables
Corning® CleanAdvantage™ technology and optimized dust cap
Eliminates the need for scoping and cleaning prior to initial field connection