AA990AZGLZHBB100M
EDGE™ RC Indoor Breakout Trunk - MTP to MTP 576F, 24F MTP connector (Non-Pinned) to 12F MTP connector (Non-Pinned), OS2 Single-mode Ultra Indoor LSZH Cable, 100 Meters
Spécifications générales
| Référence du produit | AA990AZGLZHBB100M |
| Flame Rating | LSZH |
| Fiber Category | Single-Mode (OS2) Ultra |
| Environment | Indoor |
| Application | Data Center LAN/SAN |
| Brand | EDGE™ |
Standards
| RoHS | Free of hazardous substances according to RoHS 2011/65/EU |
Environmental Conditions
| Temperature Range, Installation | -10 °C - 60 °C (14 °F - 140 °F ) |
| Temperature Range, Operation | -20 °C - 70 °C (-4 °F - 158 °F ) |
| Temperature Range, Storage | -40 °C - 70 °C (-40 °F - 158 °F ) |
Design
| Fiber Count | 576 |
| Outer Jacket Material | LSZH/FRNC |
| Polarity | Type B |
Mechanical Specifications
| Nominal Outer Diameter | 25.5 mm |
| Max. Tensile Strength, Short-Term | 660 N |
| Crush Resistance | 1000 N/10 cm |
| Min. Bend Radius Installation | 245.1 mm |
| Min. Bend Radius Operation | 245.1 mm |
| Weight | 451.6 kg/km |
Specifications - Connector A
| Reflectance, Typical | < -60 dB |
| Insertion Loss, Max. | 0.35 dB |
| Connector Type | 24 F MTP® (non-pinned) |
| Ferrule Material | Composite |
| Housing Material | Composite |
| Reflectance | < -60 dB |
Specifications - Connector B
| Reflectance, Typical | < -60 dB |
| Insertion Loss, Max. | 0.35 dB |
| Tensile Strength Jacketed Cable | 44 N |
| Boot Color | Black |
| Connector Type | 12 F MTP® (non-pinned) |
| Ferrule Material | Composite |
| Housing Material | Composite |
| Boot Type | Individual |
| Reflectance | < -60 dB |
Furcation - Connector A
| Leg Length | 1200 mm |
| Furcation Type | Single Furcation |
| Leg Color | Yellow |
| Leg Diameter | 3.5 mm |
| Shortest Staggering Leg Length (mm) | 1.22 mm |
| Plug Height | 36 mm |
| Plug Depth | 130 mm |
Furcation - Connector B
| Furcation Type | Single Furcation |
| Leg Color | Yellow |
| Shortest Staggering Leg Length (mm) | 914 mm |
| Leg Length | 900 mm |
Pulling Grip - Connector A
| Pulling grip | Yes |
| Tensile Strength | 450 N |
| Grip Outer Diameter | 74.4 mm |
Pulling Grip - Connector B
| Pulling grip | Protective only |
Dimensions
| Length | 100 m |
| Cable Weight | 473 kg/km |
Ordering Information
| Package Contents | Adapter, Key Hole Furcation Double Wide |
| Packaging Method | Plastic reel |
| Units per Delivery | 1/1 |
Reduced Installation Time
EDGE RC allows the installer to remove splicing in the field. Reducing time and cost by up to 70 percent when compared to deploying multiple cables in lower fiber counts.
Factory Termination
Results in quicker deployment and better performance while reducing risks associated with field installation, rework, or high insertion loss.
Solution flexibility
Allows a flexible path to connectivity with MTP and LC configurations.