GE2E208QLZDDU020M
Troncal MTP® EDGE8® multimodo 50 µm (OM4), conector MTP PRO X de 8 fibras (con pines) a conector MTP PRO X de 8 fibras (con pines), 8 fibras, con patas de 840 mm, ojal de tracción en un lado, 20 m
General Specifications
| Product Number | GE2E208QLZDDU020M |
| Flame rating | LSZH/FRNC |
| Fibre category | 50 µm MM (OM4) |
| Cable assembly type | EDGE8® Trunk |
| Environment | Indoor |
| Application | Data Centre |
| Cable Type | Interconnect |
| Brand | EDGE8® |
Standards
| Reaction to Fire | Cca, s1b, d1, a1 |
| RoHS | Free of hazardous substances according to RoHS 2011/65/EU |
| Design And Test Criteria | ANSI/ICEA S-83-596 |
| Intermateability | TIA/EIA-604-5 / TIA/EIA-604-5 |
Condiciones ambientales
| Rango de temperatura, instalación | 0 °C to 50 °C (32 °F to 122 °F ) |
| Rango de temperatura, funcionamiento | -10 °C to 60 °C (14 °F to 140 °F ) |
| Rango de temperatura, almacenamiento | -25 °C to 70 °C (-13 °F to 158 °F ) |
Design
| Fibre count | 8 |
| Outer jacket material | LSZH/FRNC |
| Polarity | Universal, TIA-568 type-B |
| Fibre Type | Multimode |
Mechanical Characteristics
| Tensile strength | 440 N |
| Nominal outer diameter | 4.5 mm ± 0.3mm |
| Crush resistance | 1000 N/10 cm |
| Min. bend radius installation | 90 mm |
| Min. bend radius operation | 45 mm |
Optical Characteristics
| Fibre code | T |
| Performance option code | 98 |
| Fibre category | OM4 |
| Fibre Type | Multimode |
| Fibre name | 50 µm MM (OM4) |
| Maximum Attenuation | 2.8 dB/km / 1.0 dB/km |
| Wavelengths | 850 nm / 1300 nm |
| Fibre compliance | IEC 60793-2-10 |
| Fibre core diameter | 50 µm |
| Cladding diameter | 125 µm |
| Coating diameter | 242 µm |
| Serial 1 gigabit ethernet | 1000 m / 600 m |
| Serial 10 gigabit ethernet | 550 m / - |
| Minimum effective modal bandwidth (EMB) | 4700 MHz*km / - |
| Min. overfilled launch (OFL) bandwidth | 3500 MHz*km / 500 MHz*km |
Especificaciones - Conector A
| Pulido | APC |
| Pérdida por inserción, típica | 0,35 dB |
| Pérdida por inserción, máxima | 0,35 dB |
| Nota: | *IL in preconnectorized products is measured in the factory through two mated pairs. |
| Resistencia a la tracción del cable revestido | 44 N |
| Durabilidad | ≤ 0,2 dB de cambio, 200 reacoplamientos, FOTP-21 |
| Codificado (seguridad) | No |
| Boot colour | Black |
| Connector type | MTP PRO X® (pinned) |
| Ferrule material | Composite |
| Housing colour | Green |
| Housing material | Composite |
| Boot type | Individual |
| Reflectance | < -20 dB |
Specifications - Connector B
| Polish | APC |
| Insertion loss, typical | 0.35 dB |
| Insertion loss, max. | 0.35 dB |
| Note: | *IL in preconnectorized products is measured in the factory through two mated pairs. |
| Tensile strength jacketed cable | 44 N |
| Durability | ≤ 0.2 dB change, 200 rematings, FOTP-21 |
| Keyed (security) | No |
| Boot colour | Black |
| Connector type | MTP PRO X® (pinned) |
| Ferrule material | Ceramic |
| Housing colour | Green |
| Housing material | Composite |
| Boot type | Individual |
| Reflectance | < -20 dB |
Furcación - Conector A
| Piernas escalonadas por grupo | 6 |
| Longitud de la pierna | 840 mm -0 / +840mm |
| Tipo de furcación | EDGE™ tamaño 1, 14,7 mm x 14,7 mm x 108,6 mm |
| Color de la pierna | Verde agua |
| Diámetro de la pierna | 2 mm |
| Incremento del escalonamiento | 100 mm |
| Longitud menor de las piernas escalonadas (mm) | 840 mm |
| Tipo de clavija | Tamaño 1 EDGE™ |
| Número de piernas | 1 |
| Altura de la clavija | 14,7 mm |
| Anchura de la clavija | 14,7 mm |
| Profundidad de la clavija | 108,6 mm |
Furcación - Conector B
| Tipo de furcación | EDGE™ tamaño 1, 14,7 mm x 14,7 mm x 108,6 mm |
| Color de la pierna | Verde agua |
| Diámetro de la pierna | 2 mm |
| Incremento del escalonamiento | 100 mm |
| Longitud menor de las piernas escalonadas (mm) | 840 mm |
| Tipo de clavija | Tamaño 1 EDGE™ |
| Número de piernas | 1 |
| Altura de la clavija | 14,7 mm |
| Anchura de la clavija | 14,7 mm |
| Profundidad de la clavija | 108,6 mm |
| Piernas escalonadas por grupo | 6 |
| Longitud de la pierna | 840 mm -0 / +840mm |
Pulling grip - Connector A
| Pulling grip | Yes |
| Tensile strength | 440 N |
| Grip Outer Diameter | 38 mm |
Pulling grip - Connector B
| Tensile strength | 440 N |
| Min. Duct Size Diameter | 64 mm |
Dimensions
| Length | 20 m |
| Weight | 20 kg |
Ordering Information
| Package contents | 2x U-Clip 2nd generation, Test Report |
| Packaging method | Plastic reel |
| Units per delivery | 1/1 |
Snap-in strain-relief clips
Provide easier cable management
Low-loss connectivity
Enables system design flexibility
Small outer diameter
Improves cable tray fill ratio and allows for imported airflow
Bend-improved fibre
Allows tighter cable bends for slack storage and routing, less risk of downtime due to pinched or bent cables
Corning® CleanAdvantage™ technology and optimised dust cap
Eliminates the need for scoping and cleaning prior to initial field connection