


G909024GPNDDU040F
EDGE™ MTP® Trunk Monomodo mejorado para curvatura (OS2), conector MTP® a conector MTP, 24 F, con patas de 33/33 pulgadas, manga de halado en un lado, 40 ft
También le puede interesar
Especificaciones generales
Número del producto | G909024GPNDDU040F |
Flame Rating | Plenum (OFNP) |
Fiber Category | Bend-improved SM (OS2) |
Cable Assembly Type | EDGE™ Trunk |
Environment | Indoor |
Pulling grip | Yes |
Connector Assembly Type | MTP to MTP |
Normas
Estándares de la fibra | ITU-T G.652.D y ITU-T G.657.A1 |
RoHS | Libre de sustancias peligrosas según RoHS 2011/65/EU |
Homologaciones y listados | NFPA 262, National Electrical Code® (NEC®) OFNP, CSA FT-6 |
Criterios de diseño y prueba | ANSI/ICEA S-83-596 |
Condiciones ambientales
Rango de temperatura, instalación | -5 °C a 50 °C (23 °F a 122 °F ) |
Rango de temperatura, funcionamiento | -10 °C a 60 °C (14 °F a 140 °F ) |
Design
Fiber Count | 24 |
Polarity | Universal, TIA-568 Type-B |
Strain-Relief Bracket Type | 1 |
Fiber Type | Single-Mode Ultra-Bendable Fiber |
Especificaciones mecánicas
Diámetro externo nominal | 7,7 mm ± 0,3mm |
Máxima resistencia a la tracción para la instalación | 660 N |
Radio mínimo de curvatura de instalación | 115,5 mm |
Radio mínimo de curvatura de funcionamiento | 38,5 mm |
Tamaño mínimo del conducto con codo de 18 pulgadas | 63,5 mm |
Optical Characteristics
Fiber Code | Z |
Performance Option Code | 01 |
Fiber Category | OS2 |
Fiber Type | Single-mode (OS2) / 250 µm |
Fiber Name | Bend-Improved Single-mode (OS2) |
Maximum Attenuation | 0.4 dB/km / 0.4 dB/km / 0.3 dB/km |
Wavelengths | 1310 nm / 1383 nm / 1550 nm |
Fiber Compliance | ITU-T G.652.D and ITU-T G.657.A1 |
Specifications - Connector A
Insertion Loss, Max. | 0.75 dB |
Connector Type | MTP® (non-pinned) |
Ferrule Material | Composite |
Reflectance | < -55 dB |
Specifications - Connector B
Insertion Loss, Max. | 0.75 dB |
Connector Type | MTP® (non-pinned) |
Ferrule Material | Composite |
Reflectance | < -55 dB |
Pulling Grip - Connector A
Pulling grip | Yes |
Tensile Strength | 440 N (98.92 lbf) |
Grip Outer Diameter | 41 mm (1.61 in) |
Alza de tracción - Conector B
Diámetro mínimo del conducto | 64 mm |
Dimensions
Length | 40 ft -0 / +0.61m |
Cable Weight | 50 kg/km (33.6 lb/1000 ft) |
Informaciones del pedido
Diámetro de la bobina | 23,5 in |
Ancho de la bobina | 5 in |
Unidades por entrega | 1/1 |
Cable Material
Fiber Count | 24 |
Fiber Type | OS2 Bend-improved SM |
Outer Diameter | Standard |
Flame Rating | Plenum |
Armor | Non-armored |
Length | 40 |
Unit of Measure | Feet |
Cable Type | Distribution |
Fiber Mode | Single-Mode |
CONNECTOR_A_1 Material
Connector | MTP® 12F Non-pinned |
Connector Keying | Non-Keyed |
Connector Loss | Standard Loss |
Connector Pinning | Non-Pinned |
CONNECTOR_B Material
Connector | MTP® 12F Non-pinned |
Connector Keying | Non-Keyed |
Connector Pinning | Non-Pinned |
Connector Loss | Standard Loss |
Furcation A Material
Leg Length | 33 in |
Leg Length | 838 mm -0 / +76mm (32.99 in -0 / +2.99in) |
Furcation Type | EDGE™ Size 1, 14.7 mm x 14.7 mm x 108.6 mm |
Leg Color | Yellow |
Leg Diameter | 2 mm (0.08 in) |
Furcation - Connector B
Furcation Type | EDGE™ Size 1, 14.7 mm x 14.7 mm x 108.6 mm |
Leg Color | Yellow |
Leg Diameter | 2 mm (0.08 in) |
Leg Length | 838 mm -0 / +76mm (32.99 in -0 / +2.99in) |
Leg Length | 33 in |
Snap-in strain-relief clips
Provide easier cable management
Small outer diameter
Improves cable tray fill ratio and allows for imported airflow
Low-loss connectivity
Enables system design flexibility
Bend-improved fiber
Allows tighter cable bends for slack storage and routing, less risk of downtime due to pinched or bent cables
Fiber optic trunk cable manufactured with Corning® CleanAdvantage™ technology and optimized dust cap
Eliminates the need for scoping and cleaning prior to initial field connection
Non-pinned MTP connectors on both ends
Fiber optic trunks designed to interface with the EDGE solutions or Plug & Play™ systems modules