

G899048GPNCDX100F
EDGE™ MTP® Extender Trunk Monomodo mejorado para curvatura (OS2), conector MTP® a conector MTP, 48 F, con patas de 33/60 pulgadas, manga de halado en un lado, 100 ft
General Specifications
Product Number | G899048GPNCDX100F |
Flame Rating | Plenum (OFNP) |
Fiber Category | Bend-improved Single-Mode (OS2) |
Cable Assembly Type | EDGE™ Trunk |
Environment | Indoor |
Cable Type | Indoor: ANSI/ICEA S-83-596 |
Pulling grip | Yes |
Connector Assembly Type | MTP to MTP |
Normas
Estándares de la fibra | ITU-T G.652.D y ITU-T G.657.A1 |
RoHS | Libre de sustancias peligrosas según RoHS 2011/65/EU |
Homologaciones y listados | NFPA 262, National Electrical Code® (NEC®) OFNP, CSA FT-6 |
Condiciones ambientales
Rango de temperatura, funcionamiento | -10 °C to 60 °C (14 °F to 140 °F ) |
Design
Fiber Count | 48 |
Polarity | Extender, TIA-568 Type-A |
Fiber Type | Single-mode |
Especificaciones mecánicas
Diámetro externo nominal | 8,5 mm |
Máxima resistencia a la tracción para la instalación | 660 N |
Radio mínimo de curvatura de instalación | 127,5 mm |
Radio mínimo de curvatura de funcionamiento | 42,5 mm |
Tamaño mínimo del conducto con codo de 18 pulgadas | 77 mm |
Material de revestimiento de contacto | 127,5 mm |
Optical Characteristics
Fiber Code | Z |
Performance Option Code | 01 |
Fiber Category | OS2 |
Fiber Type | Single-mode (OS2) / 250 µm |
Fiber Name | Bend-Improved Single-mode (OS2) |
Maximum Attenuation | 0.4 dB/km / 0.4 dB/km / 0.3 dB/km |
Wavelengths | 1310 nm / 1383 nm / 1550 nm |
Fiber Compliance | ITU-T G.652.D and ITU-T G.657.A1 |
Specifications - Connector A
Insertion Loss, Max. | 0.35 dB |
Boot Color | Black |
Connector Type | MTP® (pinned) |
Ferrule Material | Composite |
Reflectance | < -65 dB |
Specifications - Connector B
Insertion Loss, Max. | 0.35 dB |
Boot Color | Black |
Connector Type | MTP® (non-pinned) |
Ferrule Material | Composite |
Reflectance | < -65 dB |
Alza de tracción - Conector A
Alza para tracción | Si |
Resistencia a la tracción | 440 N |
Grip Outer Diameter | 56 mm |
Alza de tracción - Conector B
Diámetro mínimo del conducto | 89 mm |
Dimensions
Length | 100 ft |
Cable Weight | 63 kg/km |
Informaciones del pedido
Método de embalaje | Carrete de plastico |
Diámetro de la bobina | 23,5 in |
Ancho de la bobina | 5 in |
Unidades por entrega | 1/1 |
Furcation - Connector A
Leg Length | 1524 mm -0 / +76mm |
Furcation Type | EDGE™ Size 2, 20 mm x 20 mm x 108.6 mm |
Leg Color | Yellow |
Leg Diameter | 2 mm |
Leg Count | 4 |
Furcation - Connector B
Furcation Type | EDGE™ Size 2, 20 mm x 20 mm x 108.6 mm |
Leg Color | Yellow |
Leg Diameter | 2 mm |
Leg Count | 4 |
Leg Length | 838 mm -0 / +76mm |
Snap-in strain-relief clips
Provide easier cable management
Small outer diameter
Improves the cable tray fill ratio and allows for improved airflow
Low-loss connectivity
Enables system design flexibility
Bend-improved fiber
Allows tighter cable bends for slack storage and routing, less risk of downtime due to pinched or bent cables
Corning® CleanAdvantage™ technology and optimized dust cap
Eliminates the need for scoping and cleaning prior to initial field connection