GE2E2U8QLZDDU020M
EDGE8® MTP® Trunk EDGE8® MTP® Trunk
General Specifications
| Product Number | GE2E2U8QLZDDU020M |
| Flame Rating | LSZH/FRNC |
| Fiber Category | 50 µm MM (OM4) |
| Cable Assembly Type | EDGE8® Trunk |
| Environment | Indoor |
| Application | Data Center LAN/SAN |
| Cable Type | Interconnect |
| Brand | EDGE8® |
Standards
| Reaction to Fire | Cca, s1b, d1, a1 |
| RoHS | Free of hazardous substances according to RoHS 2011/65/EU |
| Design and Test Criteria | ANSI/ICEA S-83-596 |
| Intermateability | TIA/EIA-604-5 / TIA/EIA-604-5 |
Condiciones ambientales
| Rango de temperatura, instalación | 0 °C to 50 °C (32 °F to 122 °F ) |
| Rango de temperatura, funcionamiento | -10 °C to 60 °C (14 °F to 140 °F ) |
| Rango de temperatura, almacenamiento | -25 °C to 70 °C (-13 °F to 158 °F ) |
Design
| Fiber Count | 288 |
| Outer Jacket Material | LSZH/FRNC |
| Polarity | Universal, TIA-568 Type-B |
| Fiber Type | Multimode |
Mechanical Specifications
| Tensile Strength | 440 N |
| Nominal Outer Diameter | 17.6 mm ± 0.3mm |
| Crush Resistance | 1000 N/10 cm |
| Min. Bend Radius Installation | 352 mm |
| Min. Bend Radius Operation | 176 mm |
Optical Characteristics
| Fiber Code | T |
| Performance Option Code | 98 |
| Fiber Category | OM4 |
| Fiber Type | Multimode |
| Fiber Name | 50 µm MM (OM4) |
| Maximum Attenuation | 2.8 dB/km / 1.0 dB/km |
| Wavelengths | 850 nm / 1300 nm |
| Fiber Compliance | IEC 60793-2-10 |
| Fiber Core Diameter | 50 µm |
| Cladding diameter | 125 µm |
| Coating diameter | 242 µm |
| Serial 1 Gigabit Ethernet | 1000 m / 600 m |
| Serial 10 Gigabit Ethernet | 550 m / - |
| Minimum Effective Modal Bandwidth (EMB) | 4700 MHz*km / - |
| Min. Overfilled Launch (OFL) Bandwidth | 3500 MHz*km / 500 MHz*km |
Especificaciones - Conector A
| Pulido | APC |
| Pérdida por inserción, típica | 0,35 dB |
| Pérdida por inserción, máxima | 0,35 dB |
| Nota: | *IL in preconnectorized products is measured in the factory through two mated pairs. |
| Resistencia a la tracción del cable revestido | 44 N |
| Durabilidad | ≤ 0,2 dB de cambio, 200 reacoplamientos, FOTP-21 |
| Codificado (seguridad) | No |
| Boot Color | Black |
| Connector Type | MTP PRO X® (pinned) |
| Ferrule Material | Composite |
| Housing Color | Green |
| Housing Material | Composite |
| Boot Type | Individual |
| Reflectance | < -20 dB |
Specifications - Connector B
| Polish | APC |
| Insertion Loss, Typical | 0.35 dB |
| Insertion Loss, Max. | 0.35 dB |
| Note: | *IL in preconnectorized products is measured in the factory through two mated pairs. |
| Tensile Strength Jacketed Cable | 44 N |
| Durability | ≤ 0.2 dB change, 200 rematings, FOTP-21 |
| Keyed (security) | No |
| Boot Color | Black |
| Connector Type | MTP PRO X® (pinned) |
| Ferrule Material | Ceramic |
| Housing Color | Green |
| Housing Material | Composite |
| Boot Type | Individual |
| Reflectance | < -20 dB |
Furcación - Conector A
| Piernas escalonadas por grupo | 6 |
| Longitud de la pierna | 840 mm -0 / +840mm |
| Color de la pierna | Verde agua |
| Diámetro de la pierna | 2 mm |
| Incremento del escalonamiento | 100 mm |
| Longitud menor de las piernas escalonadas (mm) | 840 mm |
| Tipo de clavija | Termorretráctil |
| Número de piernas | 36 |
| Altura de la clavija | 17,4 mm |
| Anchura de la clavija | 17,4 mm |
| Profundidad de la clavija | 170 mm |
Furcación - Conector B
| Color de la pierna | Verde agua |
| Diámetro de la pierna | 2 mm |
| Incremento del escalonamiento | 100 mm |
| Longitud menor de las piernas escalonadas (mm) | 840 mm |
| Tipo de clavija | Termorretráctil |
| Número de piernas | 36 |
| Altura de la clavija | 17,4 mm |
| Anchura de la clavija | 17,4 mm |
| Profundidad de la clavija | 170 mm |
| Piernas escalonadas por grupo | 6 |
| Longitud de la pierna | 840 mm -0 / +840mm |
Pulling Grip - Connector A
| Pulling grip | Yes |
| Tensile Strength | 440 N |
| Grip Outer Diameter | 54 mm |
Pulling Grip - Connector B
| Tensile Strength | 440 N |
| Min. Duct Size Diameter | 980 mm |
Dimensions
| Length | 20 m |
| Weight | 238 kg |
Ordering Information
| Package Contents | 2x U-Clip 2nd generation, Test Report |
| Packaging Method | Plastic reel |
| Units per Delivery | 1/1 |
Snap-in strain-relief clips
Provide easier cable management
Small outer diameter
Improves the cable tray fill ratio and allows for improved airflow
Low-loss connectivity
Enables system design flexibility
Bend-improved fiber
Allows tighter cable bends for slack storage and routing, less risk of downtime due to pinched or bent cables
Corning® CleanAdvantage™ technology and optimized dust cap
Eliminates the need for scoping and cleaning prior to initial field connection