GE5E532TLZDDU030M
EDGE8® MTP® Trunk Cable 50 µm multimode (OM3), 8F MTP (pinned) Connector to 8F MTP (pinned) Connector, 32F, with 840 mm legs, tool-less pulling grip one side, 30 m
Allgemeine Spezifikation
| Produktnummer | GE5E532TLZDDU030M |
| Fibre category | 50 µm MM (OM3) |
| Cable assembly type | EDGE8® Trunk |
| Cable Type | Interconnect |
Normas
| Reacción al Fuego | Cca, s1b, d1, a1 |
| RoHS | Libre de sustancias peligrosas según RoHS 2011/65/EU |
| Criterios de diseño y prueba | ANSI/ICEA S-83-596 |
| Intercompatibilidad | TIA/EIA-604-5 / TIA/EIA-604-5 |
Environmental Conditions
| Temperature range, installation | 0 °C bis 50 °C |
| Temperature range, operation | -10 °C bis 60 °C |
Design
| Fibre count | 32 |
| Polarity | Extender, TIA-568 type-A |
| Fibre Type | Multimode |
Mechanical Characteristics
| Nominal outer diameter | 8 mm ± 0.3mm |
| Min. bend radius installation | 120 mm |
| Min. bend radius operation | 40 mm |
Specifications - Connector A
| Insertion loss, max. | 0.35 dB |
| Note: | *IL in preconnectorized products is measured in the factory through two mated pairs. |
| Boot colour | Black |
| Connector type | MTP® (pinned) |
| Ferrule material | Composite |
| Reflectance | ≤ -20 dB |
Specifications - Connector B
| Insertion loss, max. | 0.35 dB |
| Note: | *IL in preconnectorized products is measured in the factory through two mated pairs. |
| Boot colour | Black |
| Connector type | MTP® (pinned) |
| Ferrule material | Composite |
| Reflectance | ≤ -20 dB |
Furcation - Connector A
| Leg Length | 840 mm -0 / +76mm |
| Furcation type | EDGE™ size 2, 20 mm x 20 mm x 108.6 mm |
| Leg colour | Turquoise |
| Leg diameter | 2 mm |
| Leg count | 4 |
| Plug Height | 20 mm |
| Plug Width | 20 mm |
| Plug Depth | 108.6 mm |
Furcation - Connector B
| Leg colour | Turquoise |
| Furcation type | EDGE™ size 2, 20 mm x 20 mm x 108.6 mm |
| Leg diameter | 2 mm |
| Leg Length | 840 mm -0 / +76mm |
| Leg count | 4 |
Pulling grip - Connector A
| Pulling grip | Yes |
| Tensile strength | 440 N |
| Grip Outer Diameter | 56 mm |
Pulling grip - Connector B
| Diámetro mínimo del conducto | 89 mm |
Dimensions
| Length | 30 m |
Informaciones del pedido
| Método de embalaje | Carrete de plastico |
| Contenido del embalaje | 2x EDGE™ clips size 2 single stack, 2x EDGE clips size 2 double stack, 2x EDGE U-clips size 2, a printed test report and SRP |
| Unidades por entrega | 1/1 |
Clips de alivio de tensión de fácil instalación
Gestión de cables más sencilla
Conectividad de baja pérdida
Mayor flexibilidad en el diseño del sistema
Pequeño diámetro exterior
Mejora la eficiencia de llenado de la bandeja portacables y permite una mejor circulación del aire
Fibra más resistente a curvaturas
Permite curvaturas más cerradas en el enrutamiento y en el almacenamiento de reserva del cable, reduciendo el riesgo de inactividad debido a cables pellizcados o doblados
Tecnología Corning® CleanAdvantage ™ y tapa antipolvo optimizada
Elimina la necesidad de examinar y de limpieza antes de la conexión inicial en el campo