NPCP-LC-OM2-12
No Polish Connectors Plus (NPC+) LC, OM2, 250/900 µm (12 Stück)
General Specifications
| Product Number | NPCP-LC-OM2-12 |
| Produkttyp | Feldinstallierbare Stecker |
| Faserkategorie | 50 µm MM (OM2) |
| Technologie | Kein Kleben und Polieren |
Normen
| RoHS | Frei von gefährlichen Substanzen gemäß RoHS 2011/65/EU |
| Zulassungen und Registrierungen | In Übereinstimmung mit den Umgebungs- und mechanischen Anforderungen der TIA/ EIA-568-D.3, Leistung gemäß GR-1081, Ausgabe 1 Abschnitt 4.3, Einfügungsdämpfungsanforderungen der GR-1081-CORE, Ausgabe 1 (GR-326-CORE, Ausgabe 4); Thermischer Zyklus und thermische Alterung, die Rückflussleistung war typisch für einen Indexgel-angepassten mechanischen Spleißverbinder, Back reflection performance was typical of an index gel-matched mechanical splice connector |
Umgebungsbedingungen
| Temperaturbereich, Betrieb | -10 °C to 60 °C |
| Temperaturbereich, Lagerung | -40 °C to 85 °C |
Design - Stecker
| Steckertyp | LC |
| Gehäusefarbe | Schwarz |
| Ferrulenmaterial | Yttria-stabilized Zirconia |
Mechanische Eigenschaften - Stecker
| Nominaler Faseraußendurchmesser | 125 µm |
| Dauerhaltbarkeit | ≤ 0,2 dB Änderung, 500 Steckzyklen, FOTP-21 |
Optische Eigenschaften - Stecker
| Polierung | UPC |
| Einfügedämpfung, max. | 0.75 dB |
| Rückflussdämpfung, typisch | < -30 dB |
Abmessungen
| Gewicht | 124 g |
Bestellinformationen
| Packungsinhalt | 12 piece box (12 individually packaged connectors in recyclable PET thermoformed containers). Minimum Order Quantity: 12 PCE |
| Versandgewicht | 1439 g |
| Stück pro Liefereinheit | 12/1 |
Installs in less than 10 seconds after cleaving fiber
Minimizes installation time and accelerates service turn‑up
Tool‑less connector activation
Uses only standard fiber preparation tools, reduces crew tooling cost and simplifies field deployment
Audible and tactile “click” feedback
Provides immediate confirmation of proper termination
Supports both 250 µm and 900 µm fibers
Enables use across a range of fiber and cable types
Single‑reuse capability
Allows deactivation of the splice element and strain relief without additional tools