G757512QLZ88U020M
EDGE™ Trunk Cable, 50 µm (OM4), Low-Loss, MTP® to MTP, 12 F EDGE™ Trunk Cable, 50 µm (OM4), Low-Loss, MTP® to MTP, 12 F
General Specifications
| Product Number | G757512QLZ88U020M |
| Fiber Category | 50 µm MM (OM4) |
| Cable Assembly Type | Multifiber |
| Pulling grip | Yes |
Standards
| Reaction to Fire | Cca, s1b, d1, a1 |
| RoHS | Free of hazardous substances according to RoHS 2011/65/EU |
| Intermateability | TIA/EIA-604-5 / TIA/EIA-604-5 |
Condiciones ambientales
| Rango de temperatura, instalación | 0 °C to 50 °C (32 °F to 122 °F ) |
| Rango de temperatura, funcionamiento | 0 °C to 60 °C (32 °F to 140 °F ) |
| Rango de temperatura, almacenamiento | -25 °C to 70 °C (-13 °F to 158 °F ) |
Design
| Fiber Count | 12 |
| Outer Jacket Material | LSZH/FRNC |
| Polarity | Universal |
| Fiber Type | Multimode |
Mechanical Specifications
| Tensile Strength | 450 N |
| Crush Resistance | 350 N/10 cm |
| Min. Bend Radius Installation | 90 mm |
| Min. Bend Radius Operation | 45 mm |
Especificaciones - Conector A
| Pulido | PC |
| Pérdida por inserción, máxima | 0,35 dB |
| Nota: | *IL in preconnectorized products is measured in the factory through two mated pairs. |
| Resistencia a la tracción del cable revestido | 44 N |
| Durabilidad | ≤ 0,2 dB de cambio, 200 reacoplamientos, FOTP-21 |
| Codificado (seguridad) | No |
| Color del boot | Negro |
| Tipo de conector | MTP® (sin pines) |
| Material de la férula | Compuesto |
| Color de la carcasa | Verde agua |
| Material de la carcasa | Compuesto |
| Tipo de boot | Individual |
Especificaciones - Conector B
| Pulido | PC |
| Pérdida por inserción, máxima | 0,35 dB |
| Nota: | *IL in preconnectorized products is measured in the factory through two mated pairs. |
| Resistencia a la tracción del cable revestido | 44 N |
| Durabilidad | ≤ 0,2 dB de cambio, 200 reacoplamientos, FOTP-21 |
| Codificado (seguridad) | No |
| Boot Color | Black |
| Connector Type | MTP® (non-pinned) |
| Ferrule Material | Composite |
| Housing Color | Aqua |
| Housing Material | Composite |
| Boot Type | Individual |
Furcación - Conector A
| Longitud de la pierna | 840 mm |
| Diámetro de la pierna | 2 mm |
| Tipo de clavija | Tamaño 1 EDGE™ |
| Número de piernas | 1 |
| Altura de la clavija | 14,7 mm |
| Anchura de la clavija | 14,7 mm |
| Profundidad de la clavija | 107,6 mm |
Furcación - Conector B
| Diámetro de la pierna | 2 mm |
| Tipo de clavija | Tamaño 1 EDGE™ |
| Número de piernas | 1 |
| Altura de la clavija | 14,7 mm |
| Anchura de la clavija | 14,7 mm |
| Profundidad de la clavija | 107,6 mm |
| Longitud de la pierna | 840 mm |
Pulling Grip - Connector A
| Pulling grip | Yes |
| Tensile Strength | 400 N |
| Grip Outer Diameter | 41 mm |
Pulling Grip - Connector B
| Tensile Strength | 450 N |
| Min. Duct Size Diameter | 64 mm |
Dimensions
| Length | 20 m |
| Outer Diameter | 4.5 mm |
| Cable Weight | 20.48 kg/km |
Ordering Information
| Package Contents | 2x EDGE™ clip size 1 test report |
| Packaging Method | Plastic reel |
| Units per Delivery | 1/1 |
Snap-in strain-relief clips
Provide easier cable management
Small outer diameter
Improves the cable tray fill ratio and allows for improved airflow
Low-loss connectivity
Enables system design flexibility
Bend-improved fiber
Allows tighter cable bends for slack storage and routing, less risk of downtime due to pinched or bent cables
Corning® CleanAdvantage™ technology and optimized dust cap
Eliminates the need for scoping and cleaning prior to initial field connection