GE5E616TLZDCX030M
EDGE8® MTP® Extender Trunk EDGE8® MTP® Extender Trunk
General Specifications
| Product Number | GE5E616TLZDCX030M |
| Fiber Category | 50 µm MM (OM3) |
| Cable Assembly Type | EDGE8® Extender Trunk |
| Environment | Indoor |
| Cable Type | Interconnect |
| Pulling grip | Yes |
| Brand | EDGE8® |
Standards
| Reaction to Fire | Cca, s1b, d1, a1 |
| RoHS | Free of hazardous substances according to RoHS 2011/65/EU |
| Design and Test Criteria | ANSI/ICEA S-83-596 |
| Intermateability | TIA/EIA-604-5 / TIA/EIA-604-5 |
Condições ambientais
| Faixa de temperatura, instalação | 0 °C to 50 °C (32 °F to 122 °F ) |
| Faixa de temperatura, operação | -10 °C to 60 °C (14 °F to 140 °F ) |
Design
| Fiber Count | 16 |
| Polarity | Universal, TIA-568 Type-A |
| Fiber Type | Multimode |
Especificações mecânicas
| Diâmetro externo nominal | 7,7 mm ± 0,3mm |
| Raio mín. de curvatura de instalação | 115.5 mm |
| Min. Bend Radius Operation | 38.5 mm |
Optical Characteristics
| Fiber Code | T |
| Performance Option Code | 88 |
| Fiber Category | OM3 |
| Fiber Type | Multimode |
| Fiber Name | 50 µm MM (OM3) |
| Maximum Attenuation | 2.8 dB/km / 1.0 dB/km |
| Wavelengths | 850 nm / 1300 nm |
| Fiber Compliance | IEC 60793-2-10 |
| Fiber Core Diameter | 50 µm |
| Cladding diameter | 125 µm |
| Coating diameter | 242 µm |
| Serial 1 Gigabit Ethernet | 750 m / 600 m |
| Serial 10 Gigabit Ethernet | 300 m / - |
| Minimum Effective Modal Bandwidth (EMB) | 2000 MHz*km / - |
| Min. Overfilled Launch (OFL) Bandwidth | 1500 MHz*km / 500 MHz*km |
Especificações - Conector A
| Perda por inserção, máx. | 0,35 dB |
| Nota: | *IL in preconnectorized products is measured in the factory through two mated pairs. |
| Cor do boot | Preto |
| Tipo de conector | MTP® (com pinos) |
| Material do ferrolho | Compósito |
| Material da carcaça | Compósito |
| Refletância | ≤ -20 dB |
Especificações - Conector B
| Perda por inserção, máx. | 0,35 dB |
| Nota: | *IL in preconnectorized products is measured in the factory through two mated pairs. |
| Cor do boot | Preto |
| Tipo de conector | MTP® (sem pinos) |
| Material do ferrolho | Compósito |
| Refletância | ≤ -20 dB |
Furca - Conector A
| Comprimento da perna | 840 mm -0 / +76mm |
| Tipo de furca | EDGE™ tamanho 1, 14,7 mm x 14,7 mm x 108,6 mm |
| Cor do terminal | Verde-água |
| Diâmetro do terminal | 2 mm |
| Contagem de pernas | 2 |
| Altura do plugue | 14,7 mm |
| Largura do plugue | 14,7 mm |
| Profundidade do plugue | 108,6 mm |
Furca - Conector B
| Tipo de furca | EDGE™ tamanho 1, 14,7 mm x 14,7 mm x 108,6 mm |
| Cor do terminal | Verde-água |
| Diâmetro do terminal | 2 mm |
| Contagem de pernas | 2 |
| Comprimento da perna | 1500 mm -0 / +76mm |
Pulling Grip - Connector A
| Pulling grip | Yes |
| Tensile Strength | 440 N |
| Grip Outer Diameter | 41 mm |
Pulling Grip - Connector B
| Min. Duct Size Diameter | 64 mm |
Dimensões
| Comprimento | 30 m |
Ordering Information
| Package Contents | 2x EDGE clips size 1 single stack, 2x EDGE clips size 1 dou- ble stack, 2x EDGE U-clips size 1, a printed test report and SRP |
| Packaging Method | Plastic reel |
| Units per Delivery | 1/1 |
Snap-in strain-relief clips
Provide easier cable management
Small outer diameter
Improves cable tray fill ratio and allows for imported airflow
Low-loss connectivity
Enables system design flexibility
Bend-improved fiber
Allows tighter cable bends for slack storage and routing, less risk of downtime due to pinched or bent cables
Corning® CleanAdvantage™ technology and optimized dust cap
Eliminates the need for scoping and cleaning prior to initial field connection