Z757512QLZ55U020M
EDGE™ Trunk Cable, 50 µm (OM4), Low-Loss, MTP® to MTP, 12 F EDGE™ Trunk Cable, 50 µm (OM4), Low-Loss, MTP® to MTP, 12 F
Especificaciones generales
| Número del producto | Z757512QLZ55U020M |
| Fiber Category | 50 µm MM (OM4) |
| Cable Assembly Type | Multifiber |
Standards
| RoHS | Free of hazardous substances according to RoHS 2011/65/EU |
Condições ambientais
| Faixa de temperatura, instalação | 0 °C a 50 °C (32 °F a 122 °F ) |
| Faixa de temperatura, operação | 0 °C a 60 °C (32 °F a 140 °F ) |
| Faixa de temperatura, armazenamento | -25 °C a 70 °C (-13 °F a 158 °F ) |
Design
| Fiber Count | 12 |
| Outer Jacket Material | LSZH/FRNC |
| Polarity | Extender, TIA-568 Type-A |
Mechanical Specifications
| Tensile Strength | 450 N |
| Max. Tensile Strength, Short-Term | 890 N |
| Max. Tensile Strength for Installation | 2700 N |
| Crush Resistance | 350 N/10 cm |
| Min. Bend Radius Installation | 90 mm |
Especificações - Conector A
| Polida | PC |
| Perda por inserção, máx. | 0,35 dB |
| Nota: | *IL in preconnectorized products is measured in the factory through two mated pairs. |
| Resistência à tração do cabo revestido | 44 N |
| Durabilidade | ≤ 0,2 dB de alteração, 200 reacoplamentos, FOTP-21 |
| Codificado (segurança) | Não |
| Boot Color | Black |
| Connector Type | MTP® (non-pinned) |
| Ferrule Material | Composite |
| Housing Color | Aqua |
| Housing Material | Composite |
| Boot Type | Individual |
Specifications - Connector B
| Polish | PC |
| Insertion Loss, Max. | 0.35 dB |
| Note: | *IL in preconnectorized products is measured in the factory through two mated pairs. |
| Tensile Strength Jacketed Cable | 44 N |
| Durability | ≤ 0.2 dB change, 200 rematings, FOTP-21 |
| Keyed (security) | No |
| Boot Color | Black |
| Connector Type | MTP® (non-pinned) |
| Ferrule Material | Composite |
| Housing Color | Aqua |
| Housing Material | Composite |
| Boot Type | Individual |
Furca - Conector A
| Comprimento da perna | 500 mm |
| Diâmetro do terminal | 2 mm |
| Tipo de plugue | Tamanho 1 EDGE™ |
| Contagem de pernas | 1 |
| Altura do plugue | 14,7 mm |
| Largura do plugue | 14,7 mm |
| Profundidade do plugue | 107,6 mm |
Furca - Conector B
| Diâmetro do terminal | 2 mm |
| Tipo de plugue | Tamanho 1 EDGE™ |
| Contagem de pernas | 1 |
| Altura do plugue | 14,7 mm |
| Largura do plugue | 14,7 mm |
| Profundidade do plugue | 107,6 mm |
| Comprimento da perna | 500 mm |
Pulling Grip - Connector A
| Pulling grip | No |
Dimensions
| Length | 20 m |
| Outer Diameter | 4.5 mm |
| Cable Weight | 20.48 kg/km |
Ordering Information
| Package Contents | 2x EDGE™ clip size 1, test report |
| Packaging Method | Plastic reel |
Snap-in strain-relief clips
Provide easier cable management
Small outer diameter
Improves the cable tray fill ratio and allows for improved airflow
Low-loss connectivity
Enables system design flexibility
Bend-improved fiber
Allows tighter cable bends for slack storage and routing, less risk of downtime due to pinched or bent cables
Corning® CleanAdvantage™ technology and optimized dust cap
Eliminates the need for scoping and cleaning prior to initial field connection