AA9E796GSZHBB100M
Troncos divisores internos EDGE™ Rapid Connect - MTP para MTP 96F, Conectores MTP 24F numa extremidade, Conectores MTP 8F na outra, Cabo Interno LSZH, Fibra SMF-28 ULTRA, Monomodo, 100 metros
General Specifications
| Product Number | AA9E796GSZHBB100M |
| Flame Rating | LSZH |
| Fiber Category | Single-Mode (OS2) Ultra |
| Cable Assembly Type | EDGE™ Rapid Connect Indoor Trunk |
| Environment | Indoor |
| Application | Data Center |
| Brand | EDGE™ |
Standards
| RoHS | Free of hazardous substances according to RoHS 2011/65/EU |
Condições ambientais
| Faixa de temperatura, instalação | -10 °C to 60 °C (14 °F to 140 °F ) |
| Faixa de temperatura, operação | 0 °C to 70 °C (32 °F to 158 °F ) |
| Faixa de temperatura, armazenamento | -40 °C to 70 °C (-40 °F to 158 °F ) |
Design
| Fiber Count | 96 |
| Polarity | Type B |
Mechanical Specifications
| Nominal Outer Diameter | 10.9 mm |
| Min. Bend Radius Installation | 163.5 mm |
| Min. Bend Radius Operation | 109 mm |
| Weight | 109 kg/km |
Especificações - Conector A
| Refletância, típica | < -60 dB |
| Perda por inserção, máx. | 0,35 dB |
| Tipo de conector | 24 F MTP® (sem pinos) |
| Ferrule Material | Composite |
| Reflectance | < -60 dB |
Specifications - Connector B
| Reflectance, Typical | ≤ -65 dB |
| Insertion Loss, Max. | 0.35 dB |
| Connector Type | 8 F MTP® (pinned) |
| Ferrule Material | Composite |
| Reflectance | < -60 dB |
Furca - Conector A
| Comprimento da perna | 1219 mm |
| Tipo de furca | Single Furcation |
| Cor do terminal | Amarelo |
| Comprimento mais curto das pernas escalonadas (mm) | 1,22 mm |
Furca - Conector B
| Tipo de furca | Single Furcation |
| Cor do terminal | Amarelo |
| Comprimento mais curto das pernas escalonadas (mm) | 914 mm |
| Comprimento da perna | 914 mm |
Pulling Grip - Connector A
| Pulling grip | Yes |
| Grip Outer Diameter | 55 mm |
Pulling Grip - Connector B
| Pulling grip | Protective only |
Dimensions
| Length | 100 m |
| Cable Weight | 109 kg/km |
Ordering Information
| Units per Delivery | 1/1 |
Reduced Installation Time
EDGE RC allows the installer to remove splicing in the field. Reducing time and cost by up to 70 percent when compared to deploying multiple cables in lower fiber counts.
Factory Termination
Results in quicker deployment and better performance while reducing risks associated with field installation, rework, or high insertion loss.
Solution flexibility
Allows a flexible path to connectivity with MTP and LC configurations.