ZE7E7U8GLZDDU030M
EDGE8® MTP® Trunk Bend-improved single-mode (OS2 ), 8F MTP (pinned) Connector to 8F MTP (pinned) Connector, 288F, with 840 mm legs, tool-less no pulling grip, 30 m
General Specifications
| Product Number | ZE7E7U8GLZDDU030M |
| Cable Assembly Type | EDGE8® Trunk |
| Cable Type | Interconnect |
Standards
| Reaction to Fire | Cca, s1b, d1, a1 |
| RoHS | Free of hazardous substances according to RoHS 2011/65/EU |
| Design and Test Criteria | ANSI/ICEA S-83-596 |
Environmental Conditions
| Temperature Range, Installation | -5 °C to 50 °C (23 °F to 122 °F ) |
| Temperature Range, Operation | -10 °C to 60 °C (14 °F to 140 °F ) |
| Temperature Range, Storage | -25 °C to 70 °C (-13 °F to 158 °F ) |
Design
| Fiber Count | 288 |
| Outer Jacket Material | LSZH/FRNC |
Mechanical Specifications
| Tensile Strength | 440 N (98.92 lbf) |
| Crush Resistance | 1000 N/10 cm |
| Min. Bend Radius Installation | 330 mm (12.99 in) |
Características ópticas
| Código da fibra | Z |
| Código de opção de desempenho | 20 |
| Categoria da fibra | OS2 |
| Tipo de fibra | Single-mode (OS2) / 250 µm |
| Nome da fibra | Monomodo de curvatura aprimorada (OS2) |
| Atenuação máxima | 0.34 dB/km / 0.34 dB/km / 0.20 dB/km |
| Comprimentos de onda | 1310 nm / 1383 nm / 1550 nm |
| Conformidade de fibra | ITU-T G.652.D e ITU-T G.657.A1 |
| Diâmetro do núcleo da fibra | 8,2 µm |
| Diâmetro da casca | 125 µm |
| Diâmetro do revestimento | 242 µm |
| Dispersion @ 1550 nm | ≤ 18 [ps/(nm*km)] |
| Dispersion @ 1625 nm | ≤ 22 [ps/(nm*km)] |
| Comprimento de onda de corte do cabo | 1260 nm |
| Diâmetro do campo modal em 1310 nm | 9,2 µm |
| Diâmetro do campo modal em 1550 nm | 10,4 µm |
| Valor de projeto do link PMD | ≤ 0,04 ps/√km |
| PMD máximo Fibra individual | ≤ 0,1 ps/√km |
Specifications - Connector A
| Insertion Loss, Typical | 0.35 dB |
| Insertion Loss, Max. | 0.35 dB |
| Note: | *IL in preconnectorized products is measured in the factory through two mated pairs. |
| Tensile Strength Jacketed Cable | 44 N (9.89 lbf) |
| Durability | ≤ 0.2 dB change, 200 rematings, FOTP-21 |
| Keyed (security) | No |
| Boot Color | Black |
| Connector Type | MTP® (pinned) |
| Ferrule Material | Composite |
| Housing Color | Green |
| Housing Material | Composite |
| Boot Type | Individual |
| Reflectance | ≤ -65 dB |
Specifications - Connector B
| Polish | APC |
| Insertion Loss, Typical | 0.35 dB |
| Insertion Loss, Max. | 0.35 dB |
| Note: | *IL in preconnectorized products is measured in the factory through two mated pairs. |
| Tensile Strength Jacketed Cable | 44 N (9.89 lbf) |
| Durability | ≤ 0.2 dB change, 200 rematings, FOTP-21 |
| Keyed (security) | No |
| Boot Color | Black |
| Connector Type | MTP® (pinned) |
| Ferrule Material | Composite |
| Housing Color | Green |
| Housing Material | Composite |
| Boot Type | Individual |
Furcation - Connector A
| Staggering Legs per Group | 6 |
| Leg Length | 840 mm -0 / +140mm (33.07 in -0 / +5.51in) |
| Leg Diameter | 2 mm (0.08 in) |
| Staggering Increment | 100 mm (3.94 in) |
| Shortest Staggering Leg Length (mm) | 840 mm (33.07 in) |
| Plug Type | Heat Shrink |
| Leg Count | 36 |
| Plug Height | 17.4 mm (0.69 in) |
| Plug Width | 17.4 mm (0.69 in) |
| Plug Depth | 170 mm (6.69 in) |
Furcation - Connector B
| Leg Diameter | 2 mm (0.08 in) |
| Staggering Increment | 100 mm (3.94 in) |
| Shortest Staggering Leg Length (mm) | 840 mm (33.07 in) |
| Plug Type | Heat Shrink |
| Leg Count | 36 |
| Plug Height | 17.4 mm (0.69 in) |
| Plug Width | 17.4 mm (0.69 in) |
| Plug Depth | 170 mm (6.69 in) |
| Staggering Legs per Group | 6 |
| Leg Length | 840 mm (33.07 in) |
Pulling Grip - Connector A
| Pulling grip | No |
Dimensions
| Length | 30 m (98.4 ft) |
| Outer Diameter | 17.4 mm (0.69 in) |
Ordering Information
| Package Contents | 2x U-Clip 2nd generation, Test Report |
| Packaging Method | Plastic reel |
| Units per Delivery | 1/1 |
Snap-in strain-relief clips
Provide easier cable management
Small outer diameter
Improves the cable tray fill ratio and allows for improved airflow
Low-loss connectivity
Enables system design flexibility
Bend-improved fiber
Allows tighter cable bends for slack storage and routing, less risk of downtime due to pinched or bent cables
Tecnologia CleanAdvantage ™ da Corning® e tampa contra poeira otimizada
Elimina a necessidade de delimitação e limpeza antes da conexão de campo inicial