G757548TPNDDU080F
EDGE™ MTP® Trunk EDGE™ MTP® Trunk
Você também pode estar interessado em
Especificações gerais
| Número do produto | G757548TPNDDU080F |
| Flame rating | Plenum (OFNP) |
| Fibre category | 50 µm MM (OM3) |
| Cable assembly type | EDGE™ Trunk |
| Environment | Indoor |
| Pulling grip | Yes |
| Connector Assembly Type | MTP to MTP |
General Specifications
| Flame rating | Plenum (OFNP) |
| Fibre category | 50 µm MM (OM3) |
| Cable assembly type | EDGE™ Trunk |
| Environment | Indoor |
| Pulling grip | Yes |
| Connector Assembly Type | MTP to MTP |
Standards
| Fibre Standards | IEC 60793-2-10 for A1a class 50/125 multimode fibres; TIA/EIA 492AAAC-A (OM3); ITU-T recommendation G.651; ISO/IEC 11801 Ed.2.2 Grade OM3 |
| Reaction to Fire | Cca, s1b, d1, a1 |
| RoHS | Free of hazardous substances according to RoHS 2011/65/EU |
| Approvals and Listings | NFPA 262, National Electrical Code® (NEC®), OFNP, CSA FT-6 |
| Design And Test Criteria | ANSI/ICEA S-83-596 |
Environmental Conditions
| Temperature range, installation | -10 °C para 60 °C |
| Temperature range, operation | -10 °C para 60 °C |
Design
| Fibre count | 48 |
| Polarity | Universal, TIA-568 type-B |
| Strain-relief bracket type | 2 |
| Fibre Type | Multimode |
Mechanical Characteristics
| Nominal outer diameter | 8.5 mm ± 0.3mm |
| Max. tensile strength for installation | 660 N |
| Min. bend radius installation | 127.5 mm |
| Min. bend radius operation | 42.5 mm |
| Minimum conduit size with 18-in elbow | 76.2 mm |
Características ópticas
| Código da fibra | T |
| Código de opção de desempenho | 80 |
| Categoria da fibra | OM3 |
| Tipo de fibra | Multimodo |
| Nome da fibra | 50 µm MM (OM3) |
| Atenuação máxima | 2.8 dB/km / 1.0 dB/km |
| Comprimentos de onda | 850 nm / 1300 nm |
| Conformidade de fibra | IEC 60793-2-10 |
| Diâmetro do núcleo da fibra | 50 µm |
| Ethernet 1 Gigabit serial | 1000 m / 600 m |
| Ethernet 10 Gigabit serial | 300 m / - |
| Largura de banda modal efetiva mínima (EMB) | 2000 MHz*km / - |
| Largura de banda mín. de lançamento sobrecarregado (OFL) | 1500 MHz*km / 500 MHz*km |
Specifications - Connector A
| Insertion loss, max. | 0.25 dB |
| Connector type | MTP® (non-pinned) |
| Ferrule material | Composite |
| Reflectance | < -20 dB |
Specifications - Connector B
| Insertion loss, max. | 0.25 dB |
| Connector type | MTP® (non-pinned) |
| Ferrule material | Composite |
Pulling grip - Connector A
| Pulling grip | Yes |
| Tensile strength | 440 N |
| Grip Outer Diameter | 56 mm |
Pulling grip - Connector B
| Min. Duct Size Diameter | 89 mm |
Dimensions
| Length | 80 ft -0 / +0.61m |
| Cable Weight | 63 kg/km |
Ordering Information
| Reel diameter | 23.5 in |
| Reel width | 5 in |
| Units per delivery | 1/1 |
Cable Material
| Fiber Count | 48 |
| Fiber Type | OM3 MM |
| Outer Diameter | Standard |
| Flame Rating | Plenum |
| Armor | Non-armored |
| Length | 80 |
| Unit of Measure | Feet |
| Cable Type | Distribution |
| Fiber Mode | Multimode |
CONNECTOR_A_1 Material
| Connector | MTP® 12F Non-pinned |
| Connector Keying | Non-Keyed |
| Connector Loss | Low Loss |
| Connector Pinning | Non-Pinned |
CONNECTOR_B Material
| Connector | MTP® 12F Non-pinned |
| Connector Keying | Non-Keyed |
| Connector Pinning | Non-Pinned |
| Connector Loss | Low Loss |
Furcation A Material
| Leg Length | 33 in |
| Leg Length | 838 mm -0 / +76mm |
| Furcation type | EDGE™ size 2, 20 mm x 20 mm x 108.6 mm |
| Leg colour | Turquoise |
| Leg diameter | 2 mm |
Furcation - Connector B
| Furcation type | EDGE™ size 2, 20 mm x 20 mm x 108.6 mm |
| Leg colour | Turquoise |
| Leg diameter | 2 mm |
| Leg Length | 838 mm -0 / +76mm |
| Leg Length | 33 in |
Snap-in strain-relief clips
Provide easier cable management
Small outer diameter
Improves cable tray fill ratio and allows for imported airflow
Low-loss connectivity
Enables system design flexibility
Bend-improved fiber
Allows tighter cable bends for slack storage and routing, less risk of downtime due to pinched or bent cables
Fiber optic trunk cable manufactured with Corning® CleanAdvantage™ technology and optimized dust cap
Eliminates the need for scoping and cleaning prior to initial field connection
Non-pinned MTP connectors on both ends
Fiber optic trunks designed to interface with the EDGE solutions or Plug & Play™ systems modules