CCXFCR-I0087-C003-L6
Everon® Copper Datacom S/FTP 1200/22s, Category 7A+, LSZH™/FRNC, Dca 2x 4P, Blue
通用规范
| 产品编码 | CCXFCR-I0087-C003-L6 |
| 种类 | 7A+ |
| 光缆类型 | S/FTP |
| 无卤 | 是 |
| 结构 | Duplex, 8P |
| 对火反应 | Dca, s1, d1, a1 |
| Legacy Part Number | CCXFCR-I0087-C003-L6 |
| Brand | Everon |
标准
| RoHS | 无有害物质根据RoHS 2011/65/EU |
| 认证和产品 | IEC 61156-5, EN 50288-9-1, ISO/IEC 11801 Ed. 2.2, EN 50173-1, ANSI/TIA-568-C.2, IEC 60304 |
| 设计和测试标准 | Tested and approved for Power over Ethernet applications (PoE/PoE+/4PPoE) according to IEEE 802.3af, IEEE 802.3at and IEEE 802.3bt up to 90W |
| 火焰传播试验 | IEC 60332-1; IEC 60332-3-24 |
| 烟浓度 | IEC 61034-2 |
| 卤素含量测试 | 无卤到IEC 60754-1 |
| 腐蚀水平 | 对 IEC 的无腐蚀性60754-2 |
环境条件
| 无卤 | 是 |
| 温度范围，安装 | 0 °C - 50 °C (32 °F - 122 °F ) |
| 温度范围，操作 | -20 °C - 60 °C (-4 °F - 140 °F ) |
光缆设计
| 导体 | 铜线，美标线规22/1 |
| 导体绝缘 | 无卤泡沫皮材料 |
| 扭转 | 2核心到一对 |
| 对数 | 每对周围的铝箔层压箔 |
| 整体屏蔽 | 铜编织，镀锡 |
| 外护套材料 | LSZH™/FRNC |
| 外护套颜色 | 蓝色 |
机械特性
| Fire Load | 1290 MJ/km |
| 标称外径 | 7.5 mm x 16 mm |
| 最小安装弯曲半径 | 8 x 缆直径 (在平坦的一侧) |
| 最小操作弯曲半径 | 3x 缆直径 (在扁平一侧) |
| 最大拉伸强度 | 358 N |
电特性
| 导体电阻失衡 | 1 % |
| Delay skew | 15 ns/100 m |
| Max. loop resistance | 128 Ω/km |
| 传播延迟 | 450 ns/100 m |
| 电压等级 | 小于75V d.c最大和小于50V a.c最大 |
| 在>10 MHz (NVP*c)的传输速度 | 79 % |
| 耦合衰减 | 85 dB |
| Segregation Class | d |
| Insulation Resistance | > 5000 MΩ*km |
尺寸
| Weight | 12.5 kg |
订购信息
| Cable Length | 500 m |
| 包装方法 | 鼓 |
| 每次交付的单元数 | 1/1 |
S/FTP 1200/22s cable specified up to 1300 MHz
Fulfils all requirements of category 7A+ according to EN 50288-9-1 and IEC 61156-5
根据 ISO/IEC 11801 Ed.2.2 (2011) 和 EN 50173 系列 (2011)确保高系统冗余
依据IEEE 802.3an适用于10G以太网
Each twisted pair is shielded with aluminum foil (PIMF), low skew between the pairs
总屏蔽带镀锡铜线编织
防火依据 IEC 60332-1 和 EN 50265-2-1 (FR), EN 13501-6 及 防腐蚀依据 IEC 60754-2 (NC) 和 EN 50267
低烟依据 IEC 61034 和 EN 50268； 无卤(ZH/0H), 着火时有毒气体无蔓延
Sans halogène (LSZH™)
满足B类干扰辐射及抗干扰标准(EN 55022 和 EN 55024)
Supports Power over Ethernet (PoE / PoE+/ PoE++) according IEEE 802.3bt
S/FTP 1200/22s cable designed up to 1300 MHz
Fulfils all requirements of category 7A+ EN50288-9-1 and IEC 61156-5
Suitable for Classe D to FA according to ISO/IEC 11801. EN50173 and 10 Gigabit Ethernet according to IEEE 802.3an
Tested and approved for Power over Ethernet applications (PoE/PoE+/4PPoE) according to IEEE 802.3af, IEEE 802.3at and IEEE 802.3bt up to 90W
Certified by a vendor-independent and impartial test lab
Flame retardant and non corrosive (FRNC), Low smoke and halogen-free (LSZH)
Overall shielding with tinned copper wire braiding and each twisted pair is individually shielded with a Allaminated foil (S/FTP)
Length marking on jacket
Dca-s1,d1,a1