GE2E2K2QLZDDU020M
EDGE8® MTP® Trunk 50 µm multimode (OM4), 8F MTP PRO X (pinned) Connector to 8F MTP PRO X (pinned) Connector, 192F, with 840 mm legs, tool-less pulling grip one side, 20 M
Allgemeine Spezifikation
| Produktnummer | GE2E2K2QLZDDU020M |
| Flame Rating | LSZH/FRNC |
| Fiber Category | 50 µm MM (OM4) |
| Cable Assembly Type | EDGE8® Trunk |
| Environment | Indoor |
| Anwendung | Rechenzentren |
| Kabeltyp | Verbindungskabel |
| Marke | EDGE8® |
Normen
| Brandverhalten | Cca, s1b, d1, a1 |
| RoHS | Frei von gefährlichen Substanzen gemäß RoHS 2011/65/EU |
| Design und Testkriterien | ANSI/ICEA S-83-596 |
| Kompatibilität | TIA/EIA-604-5 / TIA/EIA-604-5 |
Environmental Conditions
| Temperature Range, Installation | 0 °C bis 50 °C (32 °F bis 122 °F ) |
| Temperature Range, Operation | -10 °C bis 60 °C (14 °F bis 140 °F ) |
| Temperature Range, Storage | -25 °C bis 70 °C (-13 °F bis 158 °F ) |
Design
| Fiber Count | 192 |
| Outer Jacket Material | LSZH/FRNC |
| Polarity | Universal, TIA-568 Type-B |
| Fiber Type | Multimode |
Mechanical Specifications
| Tensile Strength | 440 N |
| Nominal Outer Diameter | 15.2 mm ± 0.3mm |
| Crush Resistance | 1000 N/10 cm |
| Min. Bend Radius Installation | 304 mm |
| Min. Bend Radius Operation | 152 mm |
Optische Eigenschaften
| Fasercode | T |
| Leistungsklassen-Code | 98 |
| Faserkategorie | OM4 |
| Fasertyp | Multimode |
| Fasername | 50 µm MM (OM4) |
| Maximale Dämpfung | 2,8 dB/km / 1,0 dB/km |
| Wellenlänge | 850 nm / 1300 nm |
| Faserkonformität | IEC 60793-2-10 |
| Faserkerndurchmesser | 50 µm |
| Mantelglasdurchmesser | 125 µm |
| Coating-Durchmesser | 242 µm |
| 1 Gigabit Ethernet (seriell) | 1000 m / 600 m |
| 10 Gigabit Ethernet (seriell) | 550 m / - |
| Minimales Laserbandbreiten-Längenprodukt (EMB=Effective Modal Bandwidth) | 4700 MHz*km / - |
| Minimale OFL-Bandbreite | 3500 MHz*km / 500 MHz*km |
Specifications - Connector A
| Polish | APC |
| Insertion Loss, Typical | 0.35 dB |
| Insertion Loss, Max. | 0.35 dB |
| Note: | *IL in preconnectorized products is measured in the factory through two mated pairs. |
| Tensile Strength Jacketed Cable | 44 N |
| Durability | ≤ 0.2 dB change, 200 rematings, FOTP-21 |
| Keyed (security) | No |
| Boot Color | Black |
| Connector Type | MTP PRO X® (pinned) |
| Ferrule Material | Composite |
| Housing Color | Green |
| Housing Material | Composite |
| Boot Type | Individual |
| Reflectance | < -20 dB |
Specifications - Connector B
| Polish | APC |
| Insertion Loss, Typical | 0.35 dB |
| Insertion Loss, Max. | 0.35 dB |
| Note: | *IL in preconnectorized products is measured in the factory through two mated pairs. |
| Tensile Strength Jacketed Cable | 44 N |
| Durability | ≤ 0.2 dB change, 200 rematings, FOTP-21 |
| Keyed (security) | No |
| Boot Color | Black |
| Connector Type | MTP PRO X® (pinned) |
| Ferrule Material | Ceramic |
| Housing Color | Green |
| Housing Material | Composite |
| Boot Type | Individual |
| Reflectance | < -20 dB |
Furcation - Connector A
| Staggering Legs per Group | 6 |
| Leg Length | 840 mm -0 / +840mm |
| Leg Color | Aqua |
| Leg Diameter | 2 mm |
| Staggering Increment | 100 mm |
| Shortest Staggering Leg Length (mm) | 840 mm |
| Plug Type | Heat Shrink |
| Leg Count | 24 |
| Plug Height | 15 mm |
| Plug Width | 15 mm |
| Plug Depth | 170 mm |
Furcation - Connector B
| Leg Color | Aqua |
| Leg Diameter | 2 mm |
| Staggering Increment | 100 mm |
| Shortest Staggering Leg Length (mm) | 840 mm |
| Plug Type | Heat Shrink |
| Leg Count | 24 |
| Plug Height | 15 mm |
| Plug Width | 15 mm |
| Plug Depth | 170 mm |
| Staggering Legs per Group | 6 |
| Leg Length | 840 mm -0 / +840mm |
Einzugshilfe - Stecker A
| Einzugshilfe | Ja |
| Zugkraft | 440 N |
| Einzugshilfen-Außendurchmesser | 38 mm |
Einzugshilfe - Stecker B
| Zugkraft | 440 N |
| Min. Rohr-/ Kabelkanaldurchmesser | 980 mm |
Dimensions
| Length | 20 m |
| Weight | 186 kg |
Bestellinformationen
| Packungsinhalt | 2x U-Clip 2nd generation, Test Report |
| Verpackung | Kunststoffspule |
| Stück pro Liefereinheit | 1/1 |
Einfach einrastbare Zugentlastungsclips
Einfacheres Kabelmanagement
Verlustarme Verbindungen
Ermöglichen flexibles Systemdesign
Small outer diameter
Improves cable tray fill ratio and allows for imported airflow
Biegeunempfindliche Fasern
Ermöglicht engere Kabelbiegungen für Kabelführung und Überlängenablage, geringeres Risiko von Ausfallzeiten durch eingeklemmte oder geknickte Kabel
Corning® CleanAdvantage™ Technologie und optimierte Staubschutzkappen
Visuelle Inspektion und Reinigung vor der ersten Feldverbindung sind nicht nötig