JE2E908QEZ-NA003M
EDGE8® MTP® PRO Jumper 8F, 50 µm multimode (OM4), MTP PRO X (pinned) to MTP PRO X (non-pinned), LSZH, TIA-568 Type-A polarity, no pulling grip, 3 M
You might also be interested in
General Specifications
| Product Number | JE2E908QEZ-NA003M |
| Flame Rating | LSZH/FRNC |
| Fiber Category | 50 µm MM (OM4) |
| Cable Assembly Type | EDGE8 Jumper |
| Environment | Indoor |
| Cable Type | Interconnect |
| Assembly Insertion Loss | ≤ 0.35 dB |
Standards
| RoHS | Free of hazardous substances according to RoHS 2011/65/EU |
| Intermateability | TIA/EIA-604-5 / TIA/EIA-604-5 |
Environmental Conditions
| Temperature Range, Installation | 0 °C to 50 °C (32 °F to 122 °F ) |
| Temperature Range, Operation | -10 °C to 60 °C (14 °F to 140 °F ) |
| Temperature Range, Storage | -25 °C to 70 °C (-13 °F to 158 °F ) |
Design
| Fiber Count | 8 |
| Polarity | TIA-568 Type-A |
| Fiber Type | Multimode |
Mechanical Specifications
| Minimum Bend Radius | 17 mm |
| Nominal Outer Diameter | 2 mm |
| Max. Tensile Strength for Installation | 220 N |
| Crush Resistance | 350 N/10 cm |
| Min. Bend Radius Installation | 30 mm |
| Min. Bend Radius Operation | 10 mm |
Optische Eigenschaften
| Fasercode | T |
| Leistungsklassen-Code | 98 |
| Faserkategorie | OM4 |
| Fasertyp | Multimode |
| Fasername | 50 µm MM (OM4) |
| Maximale Dämpfung | 2,8 dB/km / 1,0 dB/km |
| Wellenlänge | 850 nm / 1300 nm |
| Faserkonformität | IEC 60793-2-10 |
| Faserkerndurchmesser | 50 µm |
| Mantelglasdurchmesser | 125 µm |
| Coating-Durchmesser | 242 µm |
| 1 Gigabit Ethernet (seriell) | 1000 m / 600 m |
| 10 Gigabit Ethernet (seriell) | 550 m / - |
| Minimales Laserbandbreiten-Längenprodukt (EMB=Effective Modal Bandwidth) | 4700 MHz*km / - |
| Minimale OFL-Bandbreite | 3500 MHz*km / 500 MHz*km |
Specifications - Connector A
| Polish | APC |
| Insertion Loss, Max. | 0.35 dB |
| Note: | *IL in preconnectorized products is measured in the factory through two mated pairs. |
| Tensile Strength Jacketed Cable | 40 N |
| Durability | ≤ 0.2 dB change, 200 rematings, FOTP-21 |
| Boot Color | Black |
| Connector Type | MTP PRO X® (non-pinned) |
| Ferrule Material | Composite |
| Boot Type | Individual |
| Reflectance | < -45 dB |
Specifications - Connector B
| Polish | APC |
| Insertion Loss, Max. | 0.35 dB |
| Note: | *IL in preconnectorized products is measured in the factory through two mated pairs. |
| Tensile Strength Jacketed Cable | 40 N |
| Durability | ≤ 0.2 dB change, 200 rematings, FOTP-21 |
| Boot Color | Black |
| Connector Type | MTP PRO X® (non-pinned) |
| Ferrule Material | Composite |
| Boot Type | Individual |
| Reflectance | < -20 dB |
Dimensions
| Length | 3 m |
| Cable Weight | 9 kg/km |
Ordering Information
| Packaging Method | Cardboard box |
| Units per Delivery | 1/1 |
| Shipping Height | 180 mm |
| Shipping Width | 250 mm |
| Shipping Depth | 380 mm |
Schlankes rundes 2-Faser-Verbindungskabel
Verbessert den Luftstrom und reduziert den Füllgrad im Kabelkanal
MTP® PRO Stecker
Ermöglicht Polaritäts- und Pin-Wechsel (mit Pin - ohne Pin) im Feld
Biegeunempfindliche Fasern
Ermöglicht engere Kabelbiegungen für Kabelführung und Überlängenablage, geringeres Risiko von Ausfallzeiten durch eingeklemmte oder geknickte Kabel
Corning® CleanAdvantage™ Technologie und optimierte Staubschutzkappen
Visuelle Inspektion und Reinigung vor der ersten Feldverbindung sind nicht nötig