DE5E5K2TLZDDU030M
EDGE8® MTP® Trunk 50 µm multimode (OM3), 8F MTP (pinned) Connector to 8F MTP (pinned) Connector, 192F, with 840 mm legs, tool-less pulling grip both sides, 30 m
通用规范
| 产品编码 | DE5E5K2TLZDDU030M |
| Categoría de la fibra | 50 µm MM (OM3) |
| Tipo de montaje del cable | Tronco EDGE8® |
| Tipo de cable | Interconectar |
Normas
| Reacción al Fuego | Cca, s1b, d1, a1 |
| RoHS | Libre de sustancias peligrosas según RoHS 2011/65/EU |
| Criterios de diseño y prueba | ANSI/ICEA S-83-596 |
| Intercompatibilidad | TIA/EIA-604-5 / TIA/EIA-604-5 |
Environmental Conditions
| Temperature Range, Installation | -5 °C - 50 °C (23 °F - 122 °F ) |
| Temperature Range, Operation | -10 °C - 60 °C (14 °F - 140 °F ) |
| Temperature Range, Storage | -25 °C - 70 °C (-13 °F - 158 °F ) |
Diseño
| Número de fibras | 192 |
| Material de la chaqueta externa | LSZH™/FRNC |
| Tipo de fibra | Multimodo |
Especificaciones mecánicas
| Resistencia a la tracción | 440 N |
| Resistencia al aplastamiento | 1000 N/10 cm |
| Radio mínimo de curvatura de instalación | 240 mm |
| Radio mínimo de curvatura de funcionamiento | 80 mm |
Specifications - Connector A
| Insertion Loss, Typical | 0.35 dB |
| Insertion Loss, Max. | 0.35 dB |
| Note: | *IL in preconnectorized products is measured in the factory through two mated pairs. |
| Tensile Strength Jacketed Cable | 44 N |
| Durability | ≤ 0.2 dB change, 200 rematings, FOTP-21 |
| Keyed (security) | No |
| Boot Color | Black |
| Connector Type | MTP® (pinned) |
| Ferrule Material | Composite |
| Housing Color | Aqua |
| Housing Material | Composite |
| Boot Type | Individual |
| Reflectance | ≤ -20 dB |
Specifications - Connector B
| Insertion Loss, Typical | 0.35 dB |
| Insertion Loss, Max. | 0.35 dB |
| Note: | *IL in preconnectorized products is measured in the factory through two mated pairs. |
| Tensile Strength Jacketed Cable | 44 N |
| Durability | ≤ 0.2 dB change, 200 rematings, FOTP-21 |
| Keyed (security) | No |
| Color del boot | Negro |
| Tipo de conector | MTP® (con pines) |
| Material de la férula | Compuesto |
| Color de la carcasa | Verde agua |
| Material de la carcasa | Compuesto |
| Tipo de boot | Individual |
| Reflectancia | ≤ -20 dB |
Furcation - Connector A
| Staggering Legs per Group | 6 |
| Leg Length | 840 mm -0 / +140mm |
| Leg Diameter | 2 mm |
| Staggering Increment | 100 mm |
| Shortest Staggering Leg Length (mm) | 840 mm |
| Plug Type | Heat Shrink |
| Leg Count | 24 |
| Plug Height | 15 mm |
| Plug Width | 15 mm |
| Plug Depth | 170 mm |
Furcation - Connector B
| Leg Diameter | 2 mm |
| Staggering Increment | 100 mm |
| Shortest Staggering Leg Length (mm) | 840 mm |
| Plug Type | Heat Shrink |
| Leg Count | 24 |
| Plug Height | 15 mm |
| Plug Width | 15 mm |
| Plug Depth | 170 mm |
| Staggering Legs per Group | 6 |
| Leg Length | 840 mm -0 / +140mm |
Alza de tracción - Conector A
| Alza para tracción | Si |
| Resistencia a la tracción | 440 N |
| Diámetro mínimo del conducto | 980 mm |
| Diámetro externo de la alza | 52 mm |
Alza de tracción - Conector B
| Alza para tracción | Si |
| Resistencia a la tracción | 660 N |
| Diámetro mínimo del conducto | 980 mm |
Dimensiones
| Longitud | 30 m |
| Diámetro externo | 15 mm |
Informaciones del pedido
| Contenido del embalaje | 2x U-Clip 2nd generation, Test Report |
| Método de embalaje | Carrete de plastico |
| Unidades por entrega | 1/1 |
Snap-in strain-relief clips
Provide easier cable management
Small outer diameter
Improves the cable tray fill ratio and allows for improved airflow
Low-loss connectivity
Enables system design flexibility
Bend-improved fiber
Allows tighter cable bends for slack storage and routing, less risk of downtime due to pinched or bent cables
Tecnología Corning® CleanAdvantage ™ y tapa antipolvo optimizada
Elimina la necesidad de examinar y de limpieza antes de la conexión inicial en el campo