

GE7E7K2GLZDDU030M
EDGE8® MTP® Trunk Bend-improved single-mode (OS2 ), 8F MTP (pinned) Connector to 8F MTP (pinned) Connector, 192F, with 840 mm legs, tool-less pulling grip one side, 30 m
Especificaciones generales
Número del producto | GE7E7K2GLZDDU030M |
Fiber Category | Bend-improved Single-Mode (OS2) |
Cable Assembly Type | EDGE8® Trunk |
Cable Type | Interconnect |
Standards
Reaction to Fire | Cca, s1b, d1, a1 |
RoHS | Free of hazardous substances according to RoHS 2011/65/EU |
Design and Test Criteria | ANSI/ICEA S-83-596 |
Intermateability | TIA/EIA-604-5 / TIA/EIA-604-5 |
环境条件
温度范围,安装 | -5 °C a 50 °C (23 °F a 122 °F ) |
温度范围,操作 | -10 °C a 60 °C (14 °F a 140 °F ) |
温度范围,存储 | -25 °C a 70 °C (-13 °F a 158 °F ) |
Design
Fiber Count | 192 |
Outer Jacket Material | LSZH/FRNC |
Polarity | Universal, TIA-568 Type-A |
Fiber Type | Single-mode |
Mechanical Specifications
Tensile Strength | 440 N |
Crush Resistance | 1000 N/10 cm |
Min. Bend Radius Installation | 240 mm |
Min. Bend Radius Operation | 80 mm |
Optical Characteristics
Fiber Code | Z |
Performance Option Code | 20 |
Fiber Category | OS2 |
Fiber Type | Single-mode (OS2) / 250 µm |
Fiber Name | Bend-Improved Single-mode (OS2) |
Maximum Attenuation | 0.34 dB/km / 0.34 dB/km / 0.20 dB/km |
Wavelengths | 1310 nm / 1383 nm / 1550 nm |
Fiber Compliance | ITU-T G.652.D and ITU-T G.657.A1 |
Fiber Core Diameter | 8.2 µm |
Cladding diameter | 125 µm |
Coating diameter | 242 µm |
Dispersion @ 1550 nm | ≤ 18 [ps/(nm*km)] |
Dispersion @ 1625 nm | ≤ 22 [ps/(nm*km)] |
Cable cutoff wavelength | 1260 nm |
Mode-Field Diameter at 1310 nm | 9.2 µm |
Mode-Field Diameter at 1550 nm | 10.4 µm |
PMD Link Design Value | ≤ 0.04 ps/√km |
PMD maximum individual fiber | ≤ 0.1 ps/√km |
Specifications - Connector A
插入损耗,典型 | 0.35 dB |
插入损耗,最大 | 0.35 dB |
备注: | *IL in preconnectorized products is measured in the factory through two mated pairs. |
护套缆拉伸强度 | 44 N |
耐久性 | ≤ 0.2 dB 200 插拔, FOTP-21 |
键控(安全) | 没有 |
尾套颜色 | 黑色 |
连接器类型 | MTP®(带导向针) |
插芯材料 | 复合材料 |
配线箱颜色 | 绿色 |
配线箱材料 | 复合材料 |
尾套类型 | 单个 |
反射 | ≤ -65 dB |
Specifications - Connector B
研磨 | APC |
插入损耗,典型 | 0.35 dB |
插入损耗,最大 | 0.35 dB |
备注: | *IL in preconnectorized products is measured in the factory through two mated pairs. |
护套缆拉伸强度 | 44 N |
耐久性 | ≤ 0.2 dB 200 插拔, FOTP-21 |
键控(安全) | 没有 |
Boot Color | Black |
Connector Type | MTP® (pinned) |
Ferrule Material | Composite |
Housing Color | Green |
Housing Material | Composite |
Boot Type | Individual |
Reflectance | ≤ -65 dB |
分支 - 连接器 A
每组阶梯分支 | 6 |
分支长度 | 840 mm -0 / +140mm |
分支直径 | 2 mm |
阶梯递增 | 100 mm |
最短阶梯分支长度(mm) | 840 mm |
分支固定件类型 | 热缩 |
分支数 | 24 |
插头高度 | 15 mm |
插头宽度 | 15 mm |
插头深度 | 170 mm |
分支 - 连接器 B
分支直径 | 2 mm |
阶梯递增 | 100 mm |
最短阶梯分支长度(mm) | 840 mm |
分支固定件类型 | 热缩 |
分支数 | 24 |
插头高度 | 15 mm |
插头宽度 | 15 mm |
插头深度 | 170 mm |
每组阶梯分支 | 6 |
分支长度 | 840 mm -0 / +140mm |
Pulling Grip - Connector A
Pulling grip | Yes |
Tensile Strength | 440 N |
Grip Outer Diameter | 52 mm |
Pulling Grip - Connector B
Tensile Strength | 440 N |
Min. Duct Size Diameter | 980 mm |
Dimensions
Length | 30 m |
Outer Diameter | 15 mm |
Ordering Information
Package Contents | 2x U-Clip 2nd generation, Test Report |
Packaging Method | Plastic reel |
Units per Delivery | 1/1 |
Snap-in strain-relief clips
Provide easier cable management
Small outer diameter
Improves the cable tray fill ratio and allows for improved airflow
Low-loss connectivity
Enables system design flexibility
Bend-improved fiber
Allows tighter cable bends for slack storage and routing, less risk of downtime due to pinched or bent cables
Corning® CleanAdvantage™ technology and optimized dust cap
Eliminates the need for scoping and cleaning prior to initial field connection