ZE7E7U8GLZDDU030M
EDGE8® MTP® Trunk Bend-improved single-mode (OS2 ), 8F MTP (pinned) Connector to 8F MTP (pinned) Connector, 288F, with 840 mm legs, tool-less no pulling grip, 30 m
General Specifications
| Product Number | ZE7E7U8GLZDDU030M |
| Tipo de montaje del cable | Tronco EDGE8® |
| Tipo de cable | Interconectar |
Normas
| Reacción al Fuego | Cca, s1b, d1, a1 |
| RoHS | Libre de sustancias peligrosas según RoHS 2011/65/EU |
| Criterios de diseño y prueba | ANSI/ICEA S-83-596 |
Environmental Conditions
| Temperature Range, Installation | -5 °C to 50 °C (23 °F to 122 °F ) |
| Temperature Range, Operation | -10 °C to 60 °C (14 °F to 140 °F ) |
| Temperature Range, Storage | -25 °C to 70 °C (-13 °F to 158 °F ) |
Diseño
| Número de fibras | 288 |
| Material de la chaqueta externa | LSZH™/FRNC |
Especificaciones mecánicas
| Resistencia a la tracción | 440 N |
| Resistencia al aplastamiento | 1000 N/10 cm |
| Radio mínimo de curvatura de instalación | 330 mm |
Specifications - Connector A
| Insertion Loss, Typical | 0.35 dB |
| Insertion Loss, Max. | 0.35 dB |
| Note: | *IL in preconnectorized products is measured in the factory through two mated pairs. |
| Tensile Strength Jacketed Cable | 44 N |
| Durability | ≤ 0.2 dB change, 200 rematings, FOTP-21 |
| Keyed (security) | No |
| Color del boot | Negro |
| Tipo de conector | MTP® (con pines) |
| Material de la férula | Compuesto |
| Color de la carcasa | Verde |
| Material de la carcasa | Compuesto |
| Tipo de boot | Simplex, 4P |
| Reflectancia | ≤ -65 dB |
Especificaciones - Conector B
| Pulido | APC |
| Pérdida por inserción, típica | 0,35 dB |
| Pérdida por inserción, máxima | 0,35 dB |
| Nota: | *IL in preconnectorized products is measured in the factory through two mated pairs. |
| Resistencia a la tracción del cable revestido | 44 N |
| Durabilidad | ≤ 0,2 dB de cambio, 200 reacoplamientos, FOTP-21 |
| Codificado (seguridad) | No |
| Color del boot | Negro |
| Tipo de conector | MTP® (con pines) |
| Material de la férula | Compuesto |
| Color de la carcasa | Verde |
| Material de la carcasa | Compuesto |
| Tipo de boot | Simplex, 4P |
| Reflectancia | ≤ -65 dB |
Furcation - Connector A
| Staggering Legs per Group | 6 |
| Leg Length | 840 mm -0 / +140mm |
| Leg Diameter | 2 mm |
| Staggering Increment | 100 mm |
| Shortest Staggering Leg Length (mm) | 840 mm |
| Plug Type | Heat Shrink |
| Leg Count | 36 |
| Plug Height | 17.4 mm |
| Plug Width | 17.4 mm |
| Plug Depth | 170 mm |
Furcation - Connector B
| Leg Diameter | 2 mm |
| Staggering Increment | 100 mm |
| Shortest Staggering Leg Length (mm) | 840 mm |
| Plug Type | Heat Shrink |
| Plug Height | 17.4 mm |
| Plug Width | 17.4 mm |
| Plug Depth | 170 mm |
| Staggering Legs per Group | 6 |
| Leg Length | 840 mm |
Alza de tracción - Conector A
| Alza para tracción | No |
Dimensiones
| Longitud | 30 m |
| Diámetro externo | 17,4 mm |
Informaciones del pedido
| Método de embalaje | Carrete de plastico |
| Contenido del embalaje | 2x U-Clip 2nd generation, Test Report |
| Unidades por entrega | 1/1 |
Snap-in strain-relief clips
Provide easier cable management
Low-loss connectivity
Enables system design flexibility
Small outer diameter
Improves cable tray fill ratio and allows for imported airflow
Bend-improved fiber
Allows tighter cable bends for slack storage and routing, less risk of downtime due to pinched or bent cables
Corning® CleanAdvantage™ technology and optimized dust cap
Eliminates the need for scoping and cleaning prior to initial field connection