CAXXSM-00104-C002
Everon® Copper Datacom xs500 Copper Jack Cat.6A, Keystone, AWG 26-27, single pack
General Specifications
| Product Number | CAXXSM-00104-C002 |
| Dust Protection | Yes |
| Kategorie | 6A |
| Halogenfrei | Ja |
| Bandbreite | 500 MHz |
Normen
| Flammwidrigkeit | Klasse UL94 V-0 |
| RoHS | Frei von gefährlichen Substanzen gemäß RoHS 2011/65/EU |
| Übertragungseigenschaften der Verkabelungsstrecke | Klasse EA (ISO/IEC 11801 Ed. 2.2 2011), 10-Gigabit-Ethernet nach IEEE 802.an |
| Komponentenstandard | IEC 60603-7-51 (Edition 1.0 2010) |
Environmental Conditions
| Environmental Compatibility | Recyclable and free of heavy metal |
| Temperature Range, Installation | -40 °C to 70 °C (-40 °F to 158 °F ) |
Design
| Jack Type | RJ45 - 8/8 |
| Number of Pieces | 2 |
| Housing Material | Metal |
| Insulation diameter max. | 9 mm |
| Wire Conductor+Insulation diameter max. | 12 mm |
Mechanical Specifications
| Durability of RJ45 Jack (PoE) | ≥ 750 mating cycles under load (52 volt, 860 mA, 90 watt) in compliance with technical transmission parameters |
| Durability of RJ45 Jack | ≥ 750 mating cycles possible, EN 186000-1, test 4.5.32 |
| Cable Entry | 0° to 360° Shield contact and strain relief |
| IDC Contacts | Suitable for AWG 27 - AWG 26 flex wires |
| Contact surface | Gold pad in contact area |
| Reproducibility | Several times reusable |
| Housing Material | Metal |
Electrical Specifications
| Input to output DC Resistance Unbalance | < 50 MΩ |
| Ampacity | ≤ 1250 mA (DC) |
| Input to output DC Resistance | < 200 MΩ |
| Electric strength DC (conductor/conductor) | ≥ 1000 V DC/AC peak |
| Electrical strength DC (conductor/test plate) | ≥ 1500 V DC/AC peak |
| Insulation Resistance | ≥ 500 MΩ*km |
| Transfer Impedance | ≤ 200 mΩ at 10 MHz[less-than-or-equal-to-200-mohm-at-10-mhz] |
Abmessungen
| Höhe | 19,6 mm |
| Breite | 14,5 mm |
| Tiefe | 35 mm |
| Gewicht | 19 g |
Bestellinformationen
| Versandgewicht | 21 g |
| Stück pro Liefereinheit | 1/1 |
Erfüllt die Anforderungen im 2 und 4 Stecker Model nach Klasse E
3-Connector Permanent Link / Channel, unabhängig bestätigt
Geeignet für Anwendungen der Klasse EA nach ISO/IEC 11801und EN 50173
Keystone Abmessungen gemäß Industriestandard
Kompatibel mit Corning LANscape Anschlusskomponenten mittels einer Kupplung
Schnell und einfach zu installieren (zweiteiliges Design - keine speziellen Werkzeuge notwendig)
Integrierte Staubschutzkappe (farbcodierbar mit Zubehör)
Komponentenzertifikat Kategorie 6A nach ISO/IEC 11801
Certified by a vendor-independent and impartial test lab (GHMT AG)
certificat PVP
Zugentlastung ohne Kabelbinder
Getestet und zugelassen für Power-over-Ethernet-Anwendungen (PoE/PoE+/4PPoE) nach IEEE 802.3af, IEEE 802.3at und IEEE 802.3bt bis zu 90W