DE7E7K2GLZDDU030M
EDGE8® MTP® Trunk Bend-improved single-mode (OS2 ), 8F MTP (pinned) Connector to 8F MTP (pinned) Connector, 192F, with 840 mm legs, tool-less pulling grip both sides, 30 m
General Specifications
| Product Number | DE7E7K2GLZDDU030M |
| 光纤类别 | 抗弯曲单模(OS2) |
| 光缆组件类型 | EDGE8™ 主干光缆 |
| 光缆类型 | 互联 |
标准
| 对火反应 | Cca, s1b, d1, a1 |
| RoHS | 无有害物质根据RoHS 2011/65/EU |
| 设计和测试标准 | ANSI/ICEA S-83-596 |
| 互操作性 | TIA/EIA-604-5 / TIA/EIA-604-5 |
Environmental Conditions
| Temperature Range, Installation | -5 °C to 50 °C (23 °F to 122 °F ) |
| Temperature Range, Operation | -10 °C to 60 °C (14 °F to 140 °F ) |
| Temperature Range, Storage | -25 °C to 70 °C (-13 °F to 158 °F ) |
设计
| 光纤芯数 | 192 |
| 外护套材料 | LSZH™/FRNC |
| 光纤类型 | 单模 |
机械特性
| 拉伸强度 | 440 N |
| 抗压 | 1000 N/10 cm |
| 最小安装弯曲半径 | 240 mm |
| 最小操作弯曲半径 | 80 mm |
Optical Characteristics
| Fiber Code | Z |
| Performance Option Code | 20 |
| Fiber Category | OS2 |
| Fiber Type | Single-mode (OS2) / 250 µm |
| Fiber Name | Bend-Improved Single-mode (OS2) |
| Maximum Attenuation | 0.34 dB/km / 0.34 dB/km / 0.20 dB/km |
| Wavelengths | 1310 nm / 1383 nm / 1550 nm |
| Fiber Compliance | ITU-T G.652.D and ITU-T G.657.A1 |
| Fiber Core Diameter | 8.2 µm |
| Cladding diameter | 125 µm |
| Coating diameter | 242 µm |
| Dispersion @ 1550 nm | ≤ 18 [ps/(nm*km)] |
| Dispersion @ 1625 nm | ≤ 22 [ps/(nm*km)] |
| Cable cutoff wavelength | 1260 nm |
| Mode-Field Diameter at 1310 nm | 9.2 µm |
| Mode-Field Diameter at 1550 nm | 10.4 µm |
| PMD Link Design Value | ≤ 0.04 ps/√km |
| PMD maximum individual fiber | ≤ 0.1 ps/√km |
Specifications - Connector A
| Insertion Loss, Typical | 0.35 dB |
| Insertion Loss, Max. | 0.35 dB |
| Note: | *IL in preconnectorized products is measured in the factory through two mated pairs. |
| Tensile Strength Jacketed Cable | 44 N |
| Durability | ≤ 0.2 dB change, 200 rematings, FOTP-21 |
| Keyed (security) | No |
| 尾套颜色 | 黑色 |
| 连接器类型 | MTP®（带导向针） |
| 插芯材料 | 复合材料 |
| 配线箱颜色 | 绿色 |
| 配线箱材料 | 复合材料 |
| 尾套类型 | 单工 |
| 反射 | ≤ -65 dB |
Specifications - Connector B
| 研磨 | APC |
| 插入损耗，典型 | 0.35 dB |
| 插入损耗，最大 | 0.35 dB |
| 备注： | *IL in preconnectorized products is measured in the factory through two mated pairs. |
| 护套缆拉伸强度 | 44 N |
| 耐久性 | ≤ 0.2 dB 200 插拔, FOTP-21 |
| 键控（安全） | 没有 |
| 尾套颜色 | 黑色 |
| 连接器类型 | MTP®（带导向针） |
| 插芯材料 | 复合材料 |
| 配线箱颜色 | 绿色 |
| 配线箱材料 | 复合材料 |
| 尾套类型 | 单工 |
| 反射 | ≤ -65 dB |
Furcation - Connector A
| Staggering Legs per Group | 6 |
| Leg Length | 840 mm -0 / +140mm |
| Leg Diameter | 2 mm |
| Staggering Increment | 100 mm |
| Shortest Staggering Leg Length (mm) | 840 mm |
| Plug Type | Heat Shrink |
| Leg Count | 24 |
| Plug Height | 15 mm |
| Plug Width | 15 mm |
| Plug Depth | 170 mm |
Furcation - Connector B
| Leg Diameter | 2 mm |
| Staggering Increment | 100 mm |
| Shortest Staggering Leg Length (mm) | 840 mm |
| Plug Type | Heat Shrink |
| Plug Height | 15 mm |
| Plug Width | 15 mm |
| Plug Depth | 170 mm |
| Staggering Legs per Group | 6 |
| Leg Length | 840 mm -0 / +140mm |
拉环 - 连接器 A
| 拉手 | 是 |
| 拉伸强度 | 440 N |
| 最小管道直径 | 980 mm |
| Grip Outer Diameter | 52 mm |
拉环 - 连接器 B
| 拉手 | 是 |
| 拉伸强度 | 660 N |
| 最小管道直径 | 980 mm |
尺寸
| 长度 | 30 m |
| 外直径 | 15 mm |
订购信息
| 包装方法 | 塑料卷轴 |
| 包装内容物 | 2x U-Clip 2nd generation, Test Report |
| 每次交付的单元数 | 1/1 |
Snap-in strain-relief clips
Provide easier cable management
Low-loss connectivity
Enables system design flexibility
Small outer diameter
Improves cable tray fill ratio and allows for imported airflow
Bend-improved fiber
Allows tighter cable bends for slack storage and routing, less risk of downtime due to pinched or bent cables
Corning® CleanAdvantage™ technology and optimized dust cap
Eliminates the need for scoping and cleaning prior to initial field connection