GE7E824GLZDCX030M
EDGE8® MTP® Extender Trunk Bend-improved Single-mode (OS2), 8F MTP (pinned) Connector to 8F MTP (non-pinned) Connector, 24F, with 33/60 in legs, tool-less pulling grip one side, 100 ft
General Specifications
| Product Number | GE7E824GLZDCX030M |
| Categoria da fibra | Aprimorada para curvatura SM (OS2) |
| Tipo de montagem de cabo | Tronco extensor EDGE™ |
| Ambiente | Interno |
| Tipo de cabo | Interconectar |
| Alça de tração | Sim |
| Brand | EDGE8® |
Normas
| Reação ao Fogo | Cca, s1b, d1, a1 |
| RoHS | Livre de substâncias perigosas de acordo com RoHS 2011/65/EU |
| Projeto e critérios de teste | ANSI/ICEA S-83-596 |
| Intermateabilidade | TIA/EIA-604-5 / TIA/EIA-604-5 |
Environmental Conditions
| Temperature Range, Installation | 0 °C to 50 °C (32 °F to 122 °F ) |
| Temperature Range, Operation | -10 °C to 60 °C (14 °F to 140 °F ) |
Projeto
| Contagem da fibra | 24 |
| Polaridade | Universal, TIA-568 Tipo-A |
| Tipo de fibra | Monomodo |
Mechanical Specifications
| Nominal Outer Diameter | 7.7 mm ± 0.3mm |
| Min. Bend Radius Installation | 115.5 mm |
| Min. Bend Radius Operation | 38,5 mm |
Specifications - Connector A
| Insertion Loss, Max. | 0.35 dB |
| Note: | *IL in preconnectorized products is measured in the factory through two mated pairs. |
| Boot Color | Black |
| Connector Type | MTP® (pinned) |
| Ferrule Material | Composite |
| Reflectance | ≤ -65 dB |
Specifications - Connector B
| Insertion Loss, Max. | 0.35 dB |
| Note: | *IL in preconnectorized products is measured in the factory through two mated pairs. |
| Boot Color | Black |
| Connector Type | MTP® (non-pinned) |
| Ferrule Material | Composite |
| Reflectance | ≤ -65 dB |
Furcation - Connector A
| Leg Length | 840 mm -0 / +76mm |
| Furcation Type | EDGE™ Size 1, 14.7 mm x 14.7 mm x 108.6 mm |
| Leg Color | Yellow |
| Leg Diameter | 2 mm |
| Leg Count | 3 |
| Plug Height | 14.7 mm |
| Plug Width | 14.7 mm |
| Plug Depth | 108.6 mm |
Furcation - Connector B
| Furcation Type | EDGE™ Size 1, 14.7 mm x 14.7 mm x 108.6 mm |
| Leg Color | Yellow |
| Leg Diameter | 2 mm |
| Leg Count | 3 |
| Leg Length | 1500 mm -0 / +76mm |
Alça de tração - Conector A
| Alça de tração | Sim |
| Resistência à tração | 440 N |
| Diâmetro externo da alça | 41 mm |
Alça de tração - Conector B
| Diâmetro mín. do tamanho do duto | 64 mm |
Dimensions
| Length | 30 m |
Informações de pedido
| Conteúdo da Embalagem | 2x EDGE™ clips size 2 single stack, 2x EDGE clips size 2 double stack, 2x EDGE U-clips size 2, a printed test report and SRP |
| Método de embalagem | Carretel plástico |
| Unidades por entrega | 1/1 |
Snap-in strain-relief clips
Provide easier cable management
Small outer diameter
Improves cable tray fill ratio and allows for imported airflow
Low-loss connectivity
Enables system design flexibility
Bend-improved fiber
Allows tighter cable bends for slack storage and routing, less risk of downtime due to pinched or bent cables
Tecnologia CleanAdvantage ™ da Corning® e tampa contra poeira otimizada
Elimina a necessidade de delimitação e limpeza antes da conexão de campo inicial