

CCXEDB-I0087-C001-L6
Everon® Copper Datacom S/FTP1000/23, Category 7A, LSZH/FRNC, Dca 2x 4P, blue
通用规范
产品编码 | CCXEDB-I0087-C001-L6 |
环境 | 室内 |
种类 | 7A |
光缆类型 | S/FTP |
无卤 | 是 |
结构 | 双工 |
对火反应 | Dca, s1, d1, a1 |
Legacy Part Number | CCXEDB-I0087-C001-L6 |
Brand | Everon® |
标准
RoHS | 无有害物质根据RoHS 2011/65/EU |
认证和产品 | IEC 61156-5; EN 50288-9-1, ISO/IEC 11801 Ed. 2.2; EN 50173-1, ANSI/TIA -568-C-2; IEC60304 |
设计和测试标准 | Tested and approved for Power over Ethernet applications (PoE/PoE+/4PPoE) according to IEEE 802.3af, IEEE 802.3at and IEEE 802.3bt up to 90W |
火焰传播试验 | IEC 60332-1; IEC 60332-3-24 |
烟浓度 | IEC 61034-2 |
卤素含量测试 | 无卤到IEC 60754-1 |
腐蚀水平 | 对 IEC 的无腐蚀性60754-2 |
环境条件
无卤 | 是 |
温度范围,安装 | 0 °C - 50 °C (32 °F - 122 °F ) |
温度范围,操作 | -20 °C - 60 °C (-4 °F - 140 °F ) |
光缆设计
导体 | 铜线,美标线规23/1 |
导体绝缘 | 无卤泡沫皮材料 |
扭转 | 2核心到一对 |
对数 | 每对周围的铝箔层压箔 |
整体屏蔽 | 铜编织,镀锡 |
外护套材料 | LSZH™/FRNC |
外护套颜色 | 蓝色 |
机械特性
Fire Load | 1270 MJ/km |
标称外径 | 7.5 mm x 16 mm |
最小安装弯曲半径 | 8 x 缆直径 (在平坦的一侧) |
最小操作弯曲半径 | 3x 缆直径 (在扁平一侧) |
最大拉伸强度 | 308 N |
电特性
导体电阻失衡 | 1 % |
Delay skew | 12 ns/100 m |
Max. loop resistance | 135 Ω/km |
传播延迟 | 439 ns/100 m |
电压等级 | 小于75V d.c最大和小于50V a.c最大 |
在>10 MHz (NVP*c)的传输速度 | 76 % |
耦合衰减 | 85 dB |
Segregation Class | d |
Insulation Resistance | > 5000 MΩ*km |
尺寸
Weight | 125 kg |
订购信息
Cable Length | 500 m |
包装方法 | 鼓 |
每次交付的单元数 | 1/1 |
S/FTP 1000/23 cable specified up to 1200 MHz
Fulfils all requirements of category 7A according to standards EN 50288-9 and IEC 61156-5
根据 ISO/IEC 11801 Ed.2.2 (2011) 和 EN 50173 系列 (2011)确保高系统冗余
Suitable for 10 Gigabit Ethernet according to IEEE 802.3 an
Each twisted pair is shielded with aluminum foil (PIMF), low skew between the pairs
总屏蔽带镀锡铜线编织
阻燃依据 IEC 60332-3-24 和 EN 50266-2-4 (FR)、EN 13501-6,抗腐蚀依据 IEC 60754-2 (NC) 和 EN 50267
低烟依据 IEC 61034 和 EN 50268; 无卤(ZH/0H), 着火时有毒气体无蔓延
Sans halogène (LSZH™)
满足B类干扰辐射及抗干扰标准(EN 55022 和 EN 55024)
Certified by a vendor-independent and impartial test lab (GHMT AG)
Supports Power over Ethernet (PoE / PoE+/ PoE++) according IEEE 802.3bt
S/FTP 1000/23 cable designed up to 1200MHz
Fulfils all requirements of category 7A according to standards EN 50288-9 and IEC 61156-5
Suitable for Classe D to FA according to ISO/IEC 11801. EN50173 and 10 Gigabit Ethernet according to IEEE 802.3an
Tested and approved for Power over Ethernet applications (PoE/PoE+/4PPoE) according to IEEE 802.3af, IEEE 802.3at and IEEE 802.3bt up to 90W
Certified by a vendor-independent and impartial test lab
Flame retardant and non corrosive (FRNC), Low smoke and halogen-free (LSZH)
Overall shielding with tinned copper wire braiding and each twisted pair is individually shielded with a Allaminated foil (S/FTP)
Length marking on jacket
Dca-s1,d1,a1