GE7E848GLZDCX030M
EDGE8™ MTP® Extender Trunk Bend-improved Single-mode (OS2), 8F MTP (pinned) Connector to 8F MTP (non-pinned) Connector, 48F, with 33/60 in legs, tool-less pulling grip one side, 100 ft
General Specifications
| Product Number | GE7E848GLZDCX030M |
| 光纤类别 | 抗弯曲单模(OS2) |
| Cable Assembly Type | EDGE8® Extender Trunk |
| Environment | Indoor |
| Cable Type | Interconnect |
| Brand | EDGE8® |
Standards
| Reaction to Fire | Cca, s1b, d1, a1 |
| RoHS | Free of hazardous substances according to RoHS 2011/65/EU |
| Design and Test Criteria | ANSI/ICEA S-83-596 |
| Intermateability | TIA/EIA-604-5 / TIA/EIA-604-5 |
环境条件
| 温度范围，安装 | 0 °C to 50 °C (32 °F to 122 °F ) |
| 温度范围，操作 | -10 °C to 60 °C (14 °F to 140 °F ) |
设计
| 光纤芯数 | 48 |
| 极性 | 通用，TIA-568类型A |
| 光纤类型 | 单模 |
机械特性
| 标称外径 | 8.5 mm ± 0.3mm |
| 最小安装弯曲半径 | 127.5 mm |
| 最小操作弯曲半径 | 42.5 mm |
Optical Characteristics
| Fiber Code | Z |
| Performance Option Code | 20 |
| Fiber Category | OS2 |
| Fiber Type | Single-mode (OS2) / 250 µm |
| Fiber Name | Bend-Improved Single-mode (OS2) |
| Maximum Attenuation | 0.34 dB/km / 0.34 dB/km / 0.20 dB/km |
| Wavelengths | 1310 nm / 1383 nm / 1550 nm |
| Fiber Compliance | ITU-T G.652.D and ITU-T G.657.A1 |
| Fiber Core Diameter | 8.2 µm |
| Cladding diameter | 125 µm |
| Coating diameter | 242 µm |
| Dispersion @ 1550 nm | ≤ 18 [ps/(nm*km)] |
| Dispersion @ 1625 nm | ≤ 22 [ps/(nm*km)] |
| Cable cutoff wavelength | 1260 nm |
| Mode-Field Diameter at 1310 nm | 9.2 µm |
| Mode-Field Diameter at 1550 nm | 10.4 µm |
| PMD Link Design Value | ≤ 0.04 ps/√km |
| PMD maximum individual fiber | ≤ 0.1 ps/√km |
Specifications - Connector A
| 插入损耗，最大 | 0.35 dB |
| 备注： | *IL in preconnectorized products is measured in the factory through two mated pairs. |
| 尾套颜色 | 黑色 |
| 连接器类型 | MTP®（带导向针） |
| 插芯材料 | 复合材料 |
| 反射 | ≤ -65 dB |
Specifications - Connector B
| 插入损耗，最大 | 0.35 dB |
| 备注： | *IL in preconnectorized products is measured in the factory through two mated pairs. |
| 尾套颜色 | 黑色 |
| 连接器类型 | MTP®（不带导向针） |
| 插芯材料 | 复合材料 |
| 反射 | ≤ -65 dB |
分支 - 连接器 A
| 分支长度 | 840 mm -0 / +76mm |
| 分支类型 | EDGE™ 尺寸 2, 20 mm x 20 mm x 108.6 mm |
| 分支颜色 | 黄色 |
| 分支直径 | 2 mm |
| 分支数 | 6 |
| 插头高度 | 20 mm |
| 插头宽度 | 20 mm |
| 插头深度 | 108.6 mm |
分支 - 连接器 B
| 分支类型 | EDGE™ 尺寸 2, 20 mm x 20 mm x 108.6 mm |
| 分支颜色 | 黄色 |
| 分支直径 | 2 mm |
| 分支数 | 6 |
| 分支长度 | 1500 mm -0 / +76mm |
Pulling Grip - Connector A
| Pulling grip | Yes |
| Tensile Strength | 440 N |
| Grip Outer Diameter | 56 mm |
Pulling Grip - Connector B
| Min. Duct Size Diameter | 89 mm |
尺寸
| 长度 | 30 m |
Ordering Information
| Package Contents | 2x EDGE™ clips size 2 single stack, 2x EDGE clips size 2 double stack, 2x EDGE U-clips size 2, a printed test report and SRP |
| Packaging Method | Plastic reel |
| Units per Delivery | 1/1 |
Snap-in strain-relief clips
Provide easier cable management
Small outer diameter
Improves cable tray fill ratio and allows for imported airflow
Low-loss connectivity
Enables system design flexibility
Bend-improved fiber
Allows tighter cable bends for slack storage and routing, less risk of downtime due to pinched or bent cables
Corning® CleanAdvantage™ technology and optimized dust cap
Eliminates the need for scoping and cleaning prior to initial field connection