D757512QLZ55U020M
EDGE™ Trunk Cable, 50 µm (OM4), Low-Loss, MTP® to MTP, 12 F 500/500 mm leg lengths, pulling grip both sides, 20 m
General Specifications
| Product Number | D757512QLZ55U020M |
| Fiber Category | 50 µm MM (OM4) |
| Cable Assembly Type | Multifiber |
| Pulling grip | Yes |
Standards
| Reaction to Fire | Cca, s1b, d1, a1 |
| RoHS | Free of hazardous substances according to RoHS 2011/65/EU |
| Intermateability | TIA/EIA-604-5 / TIA/EIA-604-5 |
环境条件
| 温度范围，安装 | 0 °C to 50 °C (32 °F to 122 °F ) |
| 温度范围，操作 | 0 °C to 60 °C (32 °F to 140 °F ) |
| 温度范围，存储 | -25 °C to 70 °C (-13 °F to 158 °F ) |
Design
| Fiber Count | 12 |
| Outer Jacket Material | LSZH/FRNC |
| Polarity | Universal |
| Fiber Type | Multimode |
Mechanical Specifications
| Tensile Strength | 450 N |
| Crush Resistance | 350 N/10 cm |
| Min. Bend Radius Installation | 90 mm |
| Min. Bend Radius Operation | 45 mm |
Specifications - Connector A
| 研磨 | PC |
| 插入损耗，最大 | 0.35 dB |
| 备注： | *IL in preconnectorized products is measured in the factory through two mated pairs. |
| 护套缆拉伸强度 | 44 N |
| 耐久性 | ≤ 0.2 dB 200 插拔, FOTP-21 |
| 键控（安全） | 没有 |
| Boot Color | Black |
| Connector Type | MTP® (non-pinned) |
| Ferrule Material | Composite |
| Housing Color | Aqua |
| Housing Material | Composite |
| Boot Type | Individual |
Specifications - Connector B
| Polish | PC |
| Insertion Loss, Max. | 0.35 dB |
| Note: | *IL in preconnectorized products is measured in the factory through two mated pairs. |
| Tensile Strength Jacketed Cable | 44 N |
| Durability | ≤ 0.2 dB change, 200 rematings, FOTP-21 |
| Keyed (security) | No |
| Boot Color | Black |
| Connector Type | MTP® (non-pinned) |
| Ferrule Material | Composite |
| Housing Color | Aqua |
| Housing Material | Composite |
| Boot Type | Individual |
分支 - 连接器 A
| 分支长度 | 500 mm |
| 分支直径 | 2 mm |
| 分支固定件类型 | 尺寸1 EDGE™ |
| 分支数 | 1 |
| 插头高度 | 14.7 mm |
| 插头宽度 | 14.7 mm |
| 插头深度 | 107.6 mm |
分支 - 连接器 B
| 分支直径 | 2 mm |
| 分支固定件类型 | 尺寸1 EDGE™ |
| 分支数 | 1 |
| 插头高度 | 14.7 mm |
| 插头宽度 | 14.7 mm |
| 插头深度 | 107.6 mm |
| 分支长度 | 500 mm |
Pulling Grip - Connector A
| Pulling grip | Yes |
| Tensile Strength | 400 N |
| Min. Duct Size Diameter | 64 mm |
| Grip Outer Diameter | 41 mm |
Pulling Grip - Connector B
| Tensile Strength | 450 N |
| Min. Duct Size Diameter | 64 mm |
Dimensions
| Length | 20 m |
| Outer Diameter | 4.5 mm |
| Cable Weight | 20.48 kg/km |
Ordering Information
| Package Contents | 2x EDGE™ clip size 1 test report |
| Packaging Method | Plastic reel |
| Units per Delivery | 1/1 |
Snap-in strain-relief clips
Provide easier cable management
Small outer diameter
Improves the cable tray fill ratio and allows for improved airflow
Low-loss connectivity
Enables system design flexibility
Bend-improved fiber
Allows tighter cable bends for slack storage and routing, less risk of downtime due to pinched or bent cables
Corning® CleanAdvantage™ technology and optimized dust cap
Eliminates the need for scoping and cleaning prior to initial field connection