GE5E624TLZDCX030M
EDGE8™ MTP® Extender Trunk 50 µm multimode (OM3), 8F MTP (pinned) Connector to 8F MTP (non-pinned) Connector, 24F, with 33/60 in legs, tool-less pulling grip one side, 100 feet
General Specifications
| Product Number | GE5E624TLZDCX030M |
| Fibre category | 50 µm MM (OM3) |
| Cable assembly type | EDGE™ Extender Trunk |
| Environment | Indoor |
| Cable Type | Interconnect |
| Pulling grip | Yes |
| Brand | EDGE8® |
Standards
| Reaction to Fire | Cca-s1b, d1, a1 |
| RoHS | Free of hazardous substances according to RoHS 2011/65/EU |
| Design And Test Criteria | ANSI/ICEA S-83-596 |
| Intermateability | TIA/EIA-604-5 / TIA/EIA-604-5 |
环境条件
| 温度范围，安装 | 0 °C to 50 °C (32 °F to 122 °F ) |
| 温度范围，操作 | -10 °C to 60 °C (14 °F to 140 °F ) |
设计
| 光纤芯数 | 24 |
| Polarity | Universal, TIA-568 type-A |
| Fibre Type | Multimode |
机械特性
| 标称外径 | 7.7 mm ± 0.3mm |
| 最小安装弯曲半径 | 115.5 mm |
| 最小操作弯曲半径 | 38.5 mm |
Optical Characteristics
| Fibre code | T |
| Performance option code | 88 |
| Fibre category | OM3 |
| Fibre Type | Multimode |
| Fibre name | 50 µm MM (OM3) |
| Maximum Attenuation | 2.8 dB/km / 1.0 dB/km |
| Wavelengths | 850 nm / 1300 nm |
| Fibre compliance | IEC 60793-2-10 |
| Fibre core diameter | 50 µm |
| Cladding diameter | 125 µm |
| Coating diameter | 242 µm |
| Serial 1 gigabit ethernet | 750 m / 600 m |
| Serial 10 gigabit ethernet | 300 m / - |
| Minimum effective modal bandwidth (EMB) | 2000 MHz*km / - |
| Min. overfilled launch (OFL) bandwidth | 1500 MHz*km / 500 MHz*km |
Specifications - Connector A
| 插入损耗，最大 | 0.35 dB |
| 备注： | *IL in preconnectorized products is measured in the factory through two mated pairs. |
| 尾套颜色 | 黑色 |
| 连接器类型 | MTP®（带导向针） |
| 插芯材料 | 复合材料 |
| 反射 | ≤ -20 dB |
Specifications - Connector B
| 插入损耗，最大 | 0.35 dB |
| 备注： | *IL in preconnectorized products is measured in the factory through two mated pairs. |
| 尾套颜色 | 黑色 |
| 连接器类型 | MTP®（不带导向针） |
| 插芯材料 | 复合材料 |
| 反射 | ≤ -20 dB |
分支 - 连接器 A
| 分支长度 | 840 mm -0 / +76mm |
| 分支类型 | EDGE™ 尺寸 1, 14.7 mm x 14.7 mm x 108.6 mm |
| 分支颜色 | 水蓝色 |
| 分支直径 | 2 mm |
| 分支数 | 3 |
| 插头高度 | 14.7 mm |
| 插头宽度 | 14.7 mm |
| 插头深度 | 108.6 mm |
分支 - 连接器 B
| 分支类型 | EDGE™ 尺寸 1, 14.7 mm x 14.7 mm x 108.6 mm |
| 分支直径 | 2 mm |
| 分支长度 | 1500 mm |
Pulling grip - Connector A
| Pulling grip | Yes |
| Tensile strength | 440 N |
| Grip Outer Diameter | 41 mm |
Pulling grip - Connector B
| Min. Duct Size Diameter | 64 mm |
尺寸
| 长度 | 30 m |
Ordering Information
| Packaging method | Plastic reel |
| Package contents | 2x EDGE™ clips size 2 single stack, 2x EDGE clips size 2 double stack, 2x EDGE U-clips size 2, a printed test report and SRP |
| Units per delivery | 1/1 |
Snap-in strain-relief clips
Provide easier cable management
Small outer diameter
Improves cable tray fill ratio and allows for imported airflow
Low-loss connectivity
Enables system design flexibility
Bend-improved fibre
Allows tighter cable bends for slack storage and routing, less risk of downtime due to pinched or bent cables
Corning® CleanAdvantage™ technology and optimised dust cap
Eliminates the need for scoping and cleaning prior to initial field connection