216WH4-Y3C40A20
MiniXtend® XD Cable with Binderless* FastAccess™ Technology, A-DQ(ZN)2Y 216 F (9x24), Single-Mode (G.652.D, G.657.A2, 190µm), Telcordia
General Specifications
| Product Number | 216WH4-Y3C40A20 |
| Installation Methods | 微管 |
| 光缆类型 | 绞合松套管 |
| 环境 | 室外 |
| 产品类型 | 绝缘 |
| 光纤类别 | G.652.D/G.657.A2 |
| Brand | MiniXtend |
| Cable geometry | Round |
Standards
| RoHS | Free of hazardous substances according to RoHS 2011/65/EU |
环境条件
| 温度范围，安装 | -5 °C to 50 °C (23 °F to 122 °F ) |
| 温度范围，操作 | -20 °C to 70 °C (-4 °F to 158 °F ) |
| 温度范围，存储 | -30 °C to 70 °C (-22 °F to 158 °F ) |
光缆设计
| 光缆标识 | M#H#S#CORNING#Year# MINIXTEND® XD FAB CABLE 9x24 CONTOUR 190 LT1.4#ID number |
| 中心单元 | 绝缘 |
| 光纤芯数 | 216 |
| 外护套颜色 | 黑色 |
| 外护套材料 | 高密度聚乙烯（HDPE） |
| 外护套标称厚度 | 0.4 mm |
| 缓冲管颜色 | 蓝色, 橙色, 绿色, 棕色, 石板色, 白色, 红色, 黑色, 黄色 |
| 缓冲管尺寸 | 1.4 mm |
| 中心单元直径 | 3 mm |
| 活跃管数量 | 9 |
| 填充单元数 | 0 |
| 管位置数 | 9 |
| 光纤配色 | 1-12-蓝色-到-水蓝色-13-24-黑色-环-蓝色-到-水蓝色 |
| 每管光纤芯数 | 24 |
机械特性
| 파쇄 저항(가역적) | 500 N/10 cm |
| 最大拉伸强度，短期 | 1000 N |
| 最小安装弯曲半径 | 140 mm |
| 最小操作弯曲半径 | 105 mm |
| 标称外径 | 7 mm |
Optical Characteristics
| Fiber Code | W |
| Performance Option Code | 40 |
| Fiber Category | OS2 |
| Fiber Type | Single-mode (OS2) / 190 µm |
| Fiber Name | Contour™ Fiber |
| Maximum Attenuation | 0.32 dB/km / 0.32 dB/km / 0.18 dB/km |
| Wavelengths | 1310 nm / 1383 nm / 1550 nm |
| Fiber Compliance | ITU-T G.652.D and ITU-T G.657.A2 |
| Fiber Core Diameter | 8.2 µm |
| Cladding diameter | 125 µm |
| Coating diameter | 188 µm |
| Dispersion @ 1550 nm | ≤ 18.6 [ps/(nm*km)] |
| Dispersion @ 1625 nm | ≤ 23.7 [ps/(nm*km)] |
| Cable cutoff wavelength | 1260 nm |
| Mode-Field Diameter at 1310 nm | 9.2 µm |
| Mode-Field Diameter at 1550 nm | 10.4 µm |
| PMD maximum individual fiber | ≤ 0.1 ps/√km |
Dimensions
| Cable Weight | 48 kg/km |
| Max. cable length per reel/drum | 6000 m |
Binderless FastAccess® Technology
Innovative cable design that reduces cable access time up to 70 percent and lowers the risk of inadvertent fiber damage
Improved cable and fiber density
Small cable OD enables higher density and lower deployment cost
Optimized for air-assisted install in microducts
Suitable for installation in a duct with 10 mm inner diameter