text.skipToContent text.skipToNavigation

GE5E548QLZDDU021M-VI

EDGE8® MTP® Trunk  50 µm multimode (OM4), 8F MTP (pinned) Connector to 8F MTP (pinned) Connector, 48F, with 840 mm legs, pulling grip one side, 21 m, violet

Contact Distributor for Lead Time
General Specifications
Product Number GE5E548QLZDDU021M-VI
光纤类别 50 µm 多模 (OM4)
光缆组件类型 EDGE8™ 主干光缆
光缆类型 互联
标准
RoHS 无有害物质根据RoHS 2011/65/EU
设计和测试标准 ANSI/ICEA S-83-596 
环境条件
温度范围,安装 0 °C  to  50 °C    (32 °F  to  122 °F    )
温度范围,操作 -10 °C  to  60 °C    (14 °F  to  140 °F    )
设计
光纤芯数 48
极性 通用,TIA-568类型B
光纤类型 多模
机械特性
标称外径 8.5 mm    ± 0.3mm
Optical Characteristics
Fiber Code T
Performance Option Code 98
Fiber Category OM4 
Fiber Type Multimode
Fiber Name 50 µm MM (OM4)
Maximum Attenuation 2.8 dB/km / 1.0 dB/km
Wavelengths 850 nm / 1300 nm
Fiber Compliance IEC 60793-2-10
Fiber Core Diameter 50 µm
Cladding diameter 125 µm
Coating diameter 242 µm
Serial 1 Gigabit Ethernet 1000 m / 600 m
Serial 10 Gigabit Ethernet 550 m / -
Minimum Effective Modal Bandwidth (EMB) 4700 MHz*km / -
Min. Overfilled Launch (OFL) Bandwidth 3500 MHz*km / 500 MHz*km
Specifications - Connector A
插入损耗,最大 0.3 dB
备注: *IL in preconnectorized products is measured in the factory through two mated pairs.
尾套颜色 黑色
连接器类型 MTP®(带导向针)
插芯材料 复合材料
反射 ≤ -20 dB
Specifications - Connector B
插入损耗,最大 0.35 dB
尾套颜色 黑色
连接器类型 MTP®(带导向针)
插芯材料 复合材料
反射 ≤ -20 dB
分支 - 连接器 A
分支长度 840 mm   -0 / +76mm
分支类型 EDGE™ 尺寸 2, 20 mm x 20 mm x 108.6 mm
分支颜色 紫色
分支直径 2 mm
分支数 6
插头高度 20 mm
插头宽度 20 mm
插头深度 108.6 mm
分支 - 连接器 B
分支颜色 紫色
分支类型 EDGE™ 尺寸 2, 20 mm x 20 mm x 108.6 mm
分支直径 2 mm
分支长度 840 mm   -0 / +76mm
拉环 - 连接器 A
拉手
拉伸强度 440 N
拉环 - 连接器 B
最小管道直径 89 mm
尺寸
长度 21 m
订购信息
包装方法 塑料卷轴
包装内容物 2x-edge-tm-clip-size2-single-stack-2x-edge-clips-size2-double-stack-2x-edge-u-clips-size2
每次交付的单元数 1/1
Snap-in strain-relief clips
Provide easier cable management
Low-loss connectivity
Enables system design flexibility
Small outer diameter
Improves cable tray fill ratio and allows for imported airflow
Bend-improved fiber
Allows tighter cable bends for slack storage and routing, less risk of downtime due to pinched or bent cables
Corning® CleanAdvantage™ technology and optimized dust cap
Eliminates the need for scoping and cleaning prior to initial field connection