GE5E608QLZDCX030M
EDGE8™ MTP® Extender Trunk 50 µm multimode (OM4), 8F MTP (pinned) Connector to 8F MTP (non-pinned) Connector, 8F, with 33/60 in legs, tool-less pulling grip one side, 100 ft
General Specifications
| Product Number | GE5E608QLZDCX030M |
| 光纤类别 | 50 µm 多模 (OM4) |
| 光缆组件类型 | Pretium EDGE® 延长主干光缆 |
| 环境 | 室内 |
| 光缆类型 | 互联 |
| Brand | EDGE8™ |
标准
| 对火反应 | Cca, s1b, d1, a1 |
| RoHS | 无有害物质根据RoHS 2011/65/EU |
| 设计和测试标准 | ANSI/ICEA S-83-596 |
| 互操作性 | TIA/EIA-604-5 / TIA/EIA-604-5 |
环境条件
| 温度范围，安装 | 0 °C to 50 °C (32 °F to 122 °F ) |
| 温度范围，操作 | -10 °C to 60 °C (14 °F to 140 °F ) |
设计
| 光纤芯数 | 8 |
| 极性 | 通用，TIA-568类型A |
| 光纤类型 | 多模 |
机械特性
| 标称外径 | 5.5 mm ± 0.3mm |
| 最小安装弯曲半径 | 82.5 mm |
| 最小操作弯曲半径 | 27.5 mm |
Optical Characteristics
| Fiber Code | T |
| Performance Option Code | 98 |
| Fiber Category | OM4 |
| Fiber Type | Multimode |
| Fiber Name | 50 µm MM (OM4) |
| Maximum Attenuation | 2.8 dB/km / 1.0 dB/km |
| Wavelengths | 850 nm / 1300 nm |
| Fiber Compliance | IEC 60793-2-10 |
| Fiber Core Diameter | 50 µm |
| Cladding diameter | 125 µm |
| Coating diameter | 242 µm |
| Serial 1 Gigabit Ethernet | 1000 m / 600 m |
| Serial 10 Gigabit Ethernet | 550 m / - |
| Minimum Effective Modal Bandwidth (EMB) | 4700 MHz*km / - |
| Min. Overfilled Launch (OFL) Bandwidth | 3500 MHz*km / 500 MHz*km |
Specifications - Connector A
| 插入损耗，最大 | 0.35 dB |
| 备注： | *IL in preconnectorized products is measured in the factory through two mated pairs. |
| 尾套颜色 | 黑色 |
| 连接器类型 | MTP®（带导向针） |
| 插芯材料 | 复合材料 |
| 反射 | ≤ -20 dB |
Specifications - Connector B
| 插入损耗，最大 | 0.35 dB |
| 备注： | *IL in preconnectorized products is measured in the factory through two mated pairs. |
| 尾套颜色 | 黑色 |
| 连接器类型 | MTP®（不带导向针） |
| 插芯材料 | 复合材料 |
| 反射 | ≤ -20 dB |
分支 - 连接器 A
| 分支长度 | 840 mm -0 / +76mm |
| 分支类型 | EDGE™ 尺寸 1, 14.7 mm x 14.7 mm x 108.6 mm |
| 分支颜色 | 水蓝色 |
| 分支直径 | 2 mm |
| 分支数 | 1 |
| 插头高度 | 14.7 mm |
| 插头宽度 | 14.7 mm |
| 插头深度 | 108.6 mm |
分支 - 连接器 B
| 分支类型 | EDGE™ 尺寸 1, 14.7 mm x 14.7 mm x 108.6 mm |
| 分支颜色 | 水蓝色 |
| 分支直径 | 2 mm |
| 分支数 | 1 |
| 分支长度 | 1500 mm -0 / +76mm |
拉环 - 连接器 A
| 拉手 | 是 |
| 拉伸强度 | 440 N |
| Grip Outer Diameter | 41 mm |
拉环 - 连接器 B
| 最小管道直径 | 64 mm |
尺寸
| 长度 | 30 m |
订购信息
| 包装内容物 | 2x EDGE clips size 1 single stack, 2x EDGE clips size 1 dou- ble stack, 2x EDGE U-clips size 1, a printed test report and SRP |
| 包装方法 | 塑料卷轴 |
| 每次交付的单元数 | 1/1 |
Snap-in strain-relief clips
Provide easier cable management
Small outer diameter
Improves cable tray fill ratio and allows for imported airflow
Low-loss connectivity
Enables system design flexibility
抗弯曲光纤
允许更紧的余长存储和理线光缆弯曲，减少由于光缆被挤压和弯曲而造成的宕机风险
Corning® CleanAdvantage™ technology and optimized dust cap
Eliminates the need for scoping and cleaning prior to initial field connection