GE5E572QLZDDU030M
EDGE8® MTP® Trunk Kabel 50 µm Multimode (OM4), 8F MTP Stecker (mit Pins) auf 8F MTP Stecker (mit Pins), 72-fasrig, mit 840 mm Peitschen, Einziehhilfe auf einer Seite, 30 m
Allgemeine Spezifikation
| Produktnummer | GE5E572QLZDDU030M |
| Faserkategorie | 50 µm MM (OM4) |
| Konfektionstyp | EDGE8® Trunk |
| Kabeltyp | Verbindungskabel |
Normen
| Brandverhalten | Cca-s1b, d1, a1 |
| RoHS | Frei von gefährlichen Substanzen gemäß RoHS 2011/65/EU |
| Design und Testkriterien | ANSI/ICEA S-83-596 |
| Kompatibilität | TIA/EIA-604-5 / TIA/EIA-604-5 |
Umgebungsbedingungen
| Temperaturbereich, Installation | 0 °C bis 50 °C |
| Temperaturbereich, Betrieb | -10 °C bis 60 °C |
Design
| Faseranzahl | 72 |
| Polarität | Verlängerung (Extender), TIA-568 Typ-A |
| Fasertyp | Multimode |
Mechanische Eigenschaften
| Nominaler Außendurchmesser | 10,5 mm ± 0,3mm |
| Min. Biegeradius, Installation | 157,5 mm |
| Min. Biegeradius, Betrieb | 52,5 mm |
Caractéristiques optiques
| Code de la fibre | T |
| Code d'option de performance | 98 |
| Catégorie de fibre optique | OM4 |
| Type de fibre | Multimode |
| Nom de la fibre | 50 µm MM (OM4) |
| Atténuation maximale | 2,8 dB/km / 1,0 dB/km |
| Longueurs d'onde | 850 nm / 1300 nm |
| Conformité aux normes | IEC 60793-2-10 |
| Diamètre du cœur | 50 µm |
| Diamètre de gaine | 125 µm |
| Diamètre du revêtement primaire | 242 µm |
| Longueur de transmission pour 1 Gigabit Ethernet | 1000 m / 600 m |
| Longueur de transmission pour 10 Gigabit Ethernet | 550 m / - |
| EMB (Minimum Effective Modal Bandwidth) | 4700 MHz*km / - |
| Bande OFL (Min. Overfilled Launch) | 3500 MHz*km / 500 MHz*km |
Eigenschaften - Stecker A
| Einfügedämpfung, max. | 0,35 dB |
| Hinweis: | *IL in preconnectorized products is measured in the factory through two mated pairs. |
| Knickschutztüllenfarbe | Schwarz |
| Steckertyp | MTP® (mit Pins) |
| Ferrulenmaterial | Kunststoff |
| Rückflussdämpfung | ≤ -20 dB |
Eigenschaften - Stecker B
| Einfügedämpfung, max. | 0,35 dB |
| Hinweis: | *IL in preconnectorized products is measured in the factory through two mated pairs. |
| Knickschutztüllenfarbe | Schwarz |
| Steckertyp | MTP® (mit Pins) |
| Ferrulenmaterial | Kunststoff |
| Rückflussdämpfung | ≤ -20 dB |
Kabelaufteilung - Stecker A
| Peitschenlänge | 840 mm -0 / +76mm |
| Kabelaufteilertyp | EDGE™ Größe 2 (20 mm x 20 mm x 108,6 mm) |
| Kabelpeitschenfarbe | Türkis |
| Aufteilerdurchmesser | 2 mm |
| Kabelpeitschenanzahl | 9 |
| Steckerhöhe | 20 mm |
| Steckerbreite | 20 mm |
| Steckertiefe | 108,6 mm |
Kabelaufteilung - Stecker B
| Kabelaufteilertyp | EDGE™ Größe 2 (20 mm x 20 mm x 108,6 mm) |
| Aufteilerdurchmesser | 2 mm |
| Peitschenlänge | 840 mm |
Einzugshilfe - Stecker A
| Einzugshilfe | Ja |
| Zugkraft | 440 N |
| Einzugshilfen-Außendurchmesser | 56 mm |
Einzugshilfe - Stecker B
| Min. Rohr-/ Kabelkanaldurchmesser | 89 mm |
Abmessungen
| Länge | 30 m |
Bestellinformationen
| Verpackung | Kunststoffspule |
| Packungsinhalt | 2x EDGE™ clips size 2 single stack, 2x EDGE clips size 2 double stack, 2x EDGE U-clips size 2, a printed test report and SRP |
| Stück pro Liefereinheit | 1/1 |
Snap-in strain-relief clips
Permet une meilleure gestion des câbles
Connexion avec faible perte
Flexibilité de conception du système
Small outer diameter
Improves cable tray fill ratio and allows for imported airflow
Fibre avec meilleure courbure
Permet un meileur rangement et routage des fibres, diminue le risque de temps d'arrêt dû à des câbles pincés ou courbés
Technologie Corning® CleanAdvantage™ et protections optimisées
Élimine le besoin de test visuel et de nettoyage avant l'installation