H890412GEZ-JA002M
Plug & Play™ Harness Universal, MTP® PRO zu LC, OS2 Ultra
General Specifications
| Product Number | H890412GEZ-JA002M |
| Faserkategorie | Biegeoptimiert SM (OS2) |
| Konfektionstyp | Mehrfasrig |
| Einfügedämpfung des konfektionierten Kabels | ≤ 1,25 dB |
| Systemlösung | Plug & Play™ |
Normen
| RoHS | Frei von gefährlichen Substanzen gemäß RoHS 2011/65/EU |
Umgebungsbedingungen
| Temperaturbereich, Installation | 0 °C to 50 °C |
| Temperaturbereich, Betrieb | 0 °C to 60 °C |
| Temperaturbereich, Lagerung | -25 °C to 70 °C |
Design
| Faseranzahl | 12 |
| Außenmantelmaterial | LSZH/FRNC |
| Polarität | Universal |
Mechanische Eigenschaften
| Nominaler Außendurchmesser | 2 mm |
| Max. Zugkraft, kurzfristig | 400 N |
| Min. Biegeradius, Installation | 29 mm |
| Min. Biegeradius, Betrieb | 15 mm |
Optical Characteristics
| Fiber Code | Z |
| Performance Option Code | 20 |
| Fiber Category | OS2 |
| Fiber Type | Single-mode (OS2) / 250 µm |
| Fiber Name | Bend-Improved Single-mode (OS2) |
| Maximum Attenuation | 0.34 dB/km / 0.34 dB/km / 0.20 dB/km |
| Wavelengths | 1310 nm / 1383 nm / 1550 nm |
| Fiber Compliance | ITU-T G.652.D and ITU-T G.657.A1 |
| Fiber Core Diameter | 8.2 µm |
| Cladding diameter | 125 µm |
| Coating diameter | 242 µm |
| Dispersion @ 1550 nm | ≤ 18 [ps/(nm*km)] |
| Dispersion @ 1625 nm | ≤ 22 [ps/(nm*km)] |
| Cable cutoff wavelength | 1260 nm |
| Mode-Field Diameter at 1310 nm | 9.2 µm |
| Mode-Field Diameter at 1550 nm | 10.4 µm |
| PMD Link Design Value | ≤ 0.04 ps/√km |
| PMD maximum individual fiber | ≤ 0.1 ps/√km |
Eigenschaften - Stecker A
| Polierung | APC |
| Einfügedämpfung, max. | 0,75 dB |
| Hinweis: | * IL in pre-connectorized products is measured in the factory though two mated pairs |
| Zugkraft für ummanteltes Kabel | 44 N |
| Dauerhaltbarkeit | ≤ 0,2 dB Änderung, 200 Steckzyklen, FOTP-21 |
| Kodiert (Sicherheit) | Nein |
| Knickschutztüllenfarbe | Schwarz |
| Steckertyp | MTP® (mit Pins) |
| Ferrulenmaterial | Kunststoff |
| Gehäusefarbe | Grün |
| Gehäusematerial | Kunststoff |
| Knickschutztüllentyp | Individual |
| Rückflussdämpfung | ≤ -65 dB |
Eigenschaften - Stecker B
| Polierung | UPC |
| Einfügedämpfung, max. | 0,5 dB |
| Zugkraft für ummanteltes Kabel | 44 N |
| Dauerhaltbarkeit | ≤ 0,2 dB Änderung, 500 Steckzyklen, FOTP-21 |
| Kodiert (Sicherheit) | Nein |
| Knickschutztüllenfarbe | Blau |
| Steckertyp | LC Duplex |
| Ferrulenmaterial | Keramik |
| Gehäusefarbe | Blau |
| Gehäusematerial | Kunststoff |
| Knickschutztüllentyp | Individual |
| Rückflussdämpfung | ≤ -58 dB |
Kabelaufteilung - Stecker A
| Peitschenlänge | 300 mm |
| Kabelaufteilertyp | Schrumpf |
| Kabelpeitschenfarbe | Gelb |
| Aufteilerdurchmesser | 2 mm |
| Kabelpeitschenanzahl | 1 |
Kabelaufteilung - Stecker B
| Kabelaufteilertyp | Schrumpf |
| Kabelpeitschenfarbe | Gelb |
| Aufteilerdurchmesser | 2 mm |
| Kabelaufteilertyp | Schrumpf |
| Kabelpeitschenanzahl | 1 |
| Steckerhöhe | 3 mm |
| Steckerbreite | 3 mm |
| Steckertiefe | 60 mm |
| Peitschenlänge | 300 mm |
Abmessungen
| Länge | 2 m |
| Cable Weight | 3,35 kg/km |
Bestellinformationen
| Verpackung | Karton |
| Stück pro Liefereinheit | 1/1 |
| Verpackungshöhe | 380 mm |
| Verpackungsbreite | 250 mm |
| Verpackungstiefe | 180 mm |
MTP® assemblies with reduced footprint and cable outside diameter
Connect to Universal modules through a non-pinned MTP® Connector
Factory terminated and tested trunks provide consistent quality to ensure system performance and reduced installation time
ClearCurve® Fibre-enabled components create smaller form factor, more rugged cabling
LC Duplex Connector - RFP (Reverse-Fibre-Polarity) according to ANSI/TIA/EIA-586B.3
Occupy less space than six duplex jumpers
Easy handling of cable connections on high-fiber-count SAN directors and switch blades