GE5E508TLZDDU030M
EDGE8® MTP® Trunk Kabel 50 µm Multimode (OM3), 8F MTP Stecker (mit Pins) auf 8F MTP Stecker (mit Pins), 8-fasrig, mit 840 mm Peitschen, Einziehhilfe auf einer Seite, 30 m
General Specifications
| Product Number | GE5E508TLZDDU030M |
| Faserkategorie | 50 µm MM (OM3) |
| Konfektionstyp | EDGE8® Trunk |
| Kabeltyp | Verbindungskabel |
Normen
| Brandverhalten | Cca, s1b, d1, a1 |
| RoHS | Frei von gefährlichen Substanzen gemäß RoHS 2011/65/EU |
| Design und Testkriterien | ANSI/ICEA S-83-596 |
| Kompatibilität | TIA/EIA-604-5 / TIA/EIA-604-5 |
Umgebungsbedingungen
| Temperaturbereich, Installation | 0 °C to 50 °C |
| Temperaturbereich, Betrieb | -10 °C to 60 °C |
Design
| Faseranzahl | 8 |
| Polarität | Universal, TIA-568 Typ-B |
| Fasertyp | Multimode |
Mechanische Eigenschaften
| Nominaler Außendurchmesser | 5,5 mm ± 0,3mm |
| Min. Biegeradius, Installation | 82,5 mm |
| Min. Biegeradius, Betrieb | 27,5 mm |
Optical Characteristics
| Fiber Code | T |
| Performance Option Code | 88 |
| Fiber Category | OM3 |
| Fiber Type | Multimode |
| Fiber Name | 50 µm MM (OM3) |
| Maximum Attenuation | 2.8 dB/km / 1.0 dB/km |
| Wavelengths | 850 nm / 1300 nm |
| Fiber Compliance | IEC 60793-2-10 |
| Fiber Core Diameter | 50 µm |
| Cladding diameter | 125 µm |
| Coating diameter | 242 µm |
| Serial 1 Gigabit Ethernet | 750 m / 600 m |
| Serial 10 Gigabit Ethernet | 300 m / - |
| Minimum Effective Modal Bandwidth (EMB) | 2000 MHz*km / - |
| Min. Overfilled Launch (OFL) Bandwidth | 1500 MHz*km / 500 MHz*km |
Eigenschaften - Stecker A
| Einfügedämpfung, max. | 0,35 dB |
| Hinweis: | *IL in preconnectorized products is measured in the factory through two mated pairs. |
| Knickschutztüllenfarbe | Schwarz |
| Steckertyp | MTP® (mit Pins) |
| Ferrulenmaterial | Kunststoff |
| Rückflussdämpfung | ≤ -20 dB |
Eigenschaften - Stecker B
| Einfügedämpfung, max. | 0,35 dB |
| Hinweis: | *IL in preconnectorized products is measured in the factory through two mated pairs. |
| Knickschutztüllenfarbe | Schwarz |
| Steckertyp | MTP® (mit Pins) |
| Ferrulenmaterial | Kunststoff |
| Rückflussdämpfung | ≤ -20 dB |
Kabelaufteilung - Stecker A
| Peitschenlänge | 840 mm -0 / +76mm |
| Kabelaufteilertyp | EDGE™ Größe 1 (14,7 mm x 14,7 mm x 108,6 mm) |
| Kabelpeitschenfarbe | Türkis |
| Aufteilerdurchmesser | 2 mm |
| Kabelpeitschenanzahl | 1 |
| Steckerhöhe | 14,7 mm |
| Steckerbreite | 14,7 mm |
| Steckertiefe | 108,6 mm |
Kabelaufteilung - Stecker B
| Kabelaufteilertyp | EDGE™ Größe 1 (14,7 mm x 14,7 mm x 108,6 mm) |
| Kabelpeitschenfarbe | Türkis |
| Aufteilerdurchmesser | 2 mm |
| Kabelpeitschenanzahl | 1 |
| Peitschenlänge | 840 mm |
Einzugshilfe - Stecker A
| Einzugshilfe | Ja |
| Zugkraft | 440 N |
| Einzugshilfen-Außendurchmesser | 41 mm |
Einzugshilfe - Stecker B
| Min. Rohr-/ Kabelkanaldurchmesser | 64 mm |
Abmessungen
| Länge | 30 m |
Bestellinformationen
| Packungsinhalt | 2x EDGE clips size 1 single stack, 2x EDGE clips size 1 dou- ble stack, 2x EDGE U-clips size 1, a printed test report and SRP |
| Verpackung | Kunststoffspule |
| Stück pro Liefereinheit | 1/1 |
Snap-in strain-relief clips
Provide easier cable management
Low-loss connectivity
Enables system design flexibility
Small outer diameter
Improves cable tray fill ratio and allows for imported airflow
Bend-improved fiber
Allows tighter cable bends for slack storage and routing, less risk of downtime due to pinched or bent cables
Corning® CleanAdvantage™ technology and optimized dust cap
Eliminates the need for scoping and cleaning prior to initial field connection