GE5E5K2TLZDDU030M
EDGE8® MTP® Trunk Kabel 50 µm Multimode (OM3), 8F MTP (mit Pin) Stecker auf 8F MTP Stecker (mit Pin), 192-fasrig, mit 840 mm Peitschen, Einziehhilfe auf einer Seite, 30 m
General Specifications
| Product Number | GE5E5K2TLZDDU030M |
| Fiber Category | 50 µm MM (OM3) |
| Cable Assembly Type | EDGE8® Trunk |
| Cable Type | Interconnect |
Standards
| Reaction to Fire | Cca, s1b, d1, a1 |
| RoHS | Free of hazardous substances according to RoHS 2011/65/EU |
| Design and Test Criteria | ANSI/ICEA S-83-596 |
| Intermateability | TIA/EIA-604-5 / TIA/EIA-604-5 |
Umgebungsbedingungen
| Temperaturbereich, Installation | -5 °C to 50 °C |
| Temperaturbereich, Betrieb | -10 °C to 60 °C |
| Temperaturbereich, Lagerung | -25 °C to 70 °C |
Design
| Fiber Count | 192 |
| Outer Jacket Material | LSZH/FRNC |
| Polarity | Universal, TIA-568 Type-B |
| Fiber Type | Multimode |
Mechanical Specifications
| Tensile Strength | 440 N |
| Crush Resistance | 1000 N/10 cm |
| Min. Bend Radius Installation | 240 mm |
| Min. Bend Radius Operation | 80 mm |
Optical Characteristics
| Fiber Code | T |
| Performance Option Code | 88 |
| Fiber Category | OM3 |
| Fiber Type | Multimode |
| Fiber Name | 50 µm MM (OM3) |
| Maximum Attenuation | 2.8 dB/km / 1.0 dB/km |
| Wavelengths | 850 nm / 1300 nm |
| Fiber Compliance | IEC 60793-2-10 |
| Fiber Core Diameter | 50 µm |
| Cladding diameter | 125 µm |
| Coating diameter | 242 µm |
| Serial 1 Gigabit Ethernet | 750 m / 600 m |
| Serial 10 Gigabit Ethernet | 300 m / - |
| Minimum Effective Modal Bandwidth (EMB) | 2000 MHz*km / - |
| Min. Overfilled Launch (OFL) Bandwidth | 1500 MHz*km / 500 MHz*km |
Eigenschaften - Stecker A
| Einfügedämpfung, typisch | 0,35 dB |
| Einfügedämpfung, max. | 0,35 dB |
| Hinweis: | *IL in preconnectorized products is measured in the factory through two mated pairs. |
| Zugkraft für ummanteltes Kabel | 44 N |
| Dauerhaltbarkeit | ≤ 0,2 dB Änderung, 200 Steckzyklen, FOTP-21 |
| Kodiert (Sicherheit) | Nein |
| 尾套颜色 | 黑色 |
| 连接器类型 | MTP®（带导向针） |
| 插芯材料 | 复合材料 |
| 配线箱颜色 | 水蓝色 |
| 配线箱材料 | 复合材料 |
| 尾套类型 | 单个 |
| 反射 | ≤ -20 dB |
Specifications - Connector B
| Insertion Loss, Typical | 0.35 dB |
| Insertion Loss, Max. | 0.35 dB |
| Note: | *IL in preconnectorized products is measured in the factory through two mated pairs. |
| Tensile Strength Jacketed Cable | 44 N |
| Durability | ≤ 0.2 dB change, 200 rematings, FOTP-21 |
| Keyed (security) | No |
| Boot Color | Black |
| Connector Type | MTP® (pinned) |
| Ferrule Material | Composite |
| Housing Color | Aqua |
| Housing Material | Composite |
| Reflectance | ≤ -20 dB |
Kabelaufteilung - Stecker A
| Anzahl pro abgestufter Gruppe | 6 |
| Peitschenlänge | 840 mm -0 / +140mm |
| Aufteilerdurchmesser | 2 mm |
| Stufenabstand | 100 mm |
| Peitschenlänge (kürzeste in mm) | 840 mm |
| Kabelaufteilertyp | Schrumpf |
| Kabelpeitschenanzahl | 24 |
| Steckerhöhe | 15 mm |
| Steckerbreite | 15 mm |
| Steckertiefe | 170 mm |
Kabelaufteilung - Stecker B
| Aufteilerdurchmesser | 2 mm |
| Stufenabstand | 100 mm |
| Peitschenlänge (kürzeste in mm) | 840 mm |
| Kabelaufteilertyp | Schrumpf |
| Kabelpeitschenanzahl | 24 |
| Steckerhöhe | 15 mm |
| Steckerbreite | 15 mm |
| Steckertiefe | 170 mm |
| Anzahl pro abgestufter Gruppe | 6 |
| Peitschenlänge | 840 mm -0 / +140mm |
Pulling Grip - Connector A
| Pulling grip | Yes |
| Tensile Strength | 440 N |
| Grip Outer Diameter | 52 mm |
Pulling Grip - Connector B
| Tensile Strength | 440 N |
| Min. Duct Size Diameter | 980 mm |
Dimensions
| Length | 30 m |
| Outer Diameter | 15 mm |
Ordering Information
| Package Contents | 2x U-Clip 2nd generation, Test Report |
| Packaging Method | Plastic reel |
| Units per Delivery | 1/1 |
Snap-in strain-relief clips
Provide easier cable management
Low-loss connectivity
Enables system design flexibility
Small outer diameter
Improves cable tray fill ratio and allows for imported airflow
Bend-improved fiber
Allows tighter cable bends for slack storage and routing, less risk of downtime due to pinched or bent cables
Corning® CleanAdvantage™ technology and optimized dust cap
Eliminates the need for scoping and cleaning prior to initial field connection