J757512QEZ-NB008M
12-Fiber MTP® PRO Jumper 50 µm multimode (OM4), MTP (non-pinned) to MTP (non-pinned), TIA-568 Type-B polarity, no pulling grip, LSZH, 8 m
Allgemeine Spezifikation
| Produktnummer | J757512QEZ-NB008M |
| Flame Rating | LSZH/FRNC |
| Fiber Category | 50 µm MM (OM4) |
| Cable Type | Interconnect |
Standards
| RoHS | Free of hazardous substances according to RoHS 2011/65/EU |
Environmental Conditions
| Temperature Range, Installation | 0 °C bis 50 °C (32 °F bis 122 °F ) |
| Temperature Range, Operation | -10 °C bis 60 °C (14 °F bis 140 °F ) |
Design
| Fiber Count | 12 |
| Outer Jacket Material | LSZH/FRNC |
| Fiber Type | Multimode |
Mechanical Specifications
| Minimum Bend Radius | 17 mm |
| Tensile Strength | 200 N |
| Crush Resistance | 750 N/10 cm |
Optische Eigenschaften
| Fasercode | T |
| Leistungsklassen-Code | 98 |
| Faserkategorie | OM4 |
| Fasertyp | Multimode |
| Fasername | 50 µm MM (OM4) |
| Maximale Dämpfung | 3,8 dB/km / 2,0 dB/km |
| Wellenlänge | 850 nm / 1300 nm |
| Faserkonformität | IEC 60793-2-10 |
| Faserkerndurchmesser | 50 µm |
| Mantelglasdurchmesser | 125 µm |
| Coating-Durchmesser | 242 µm |
| 1 Gigabit Ethernet (seriell) | 1000 m / 600 m |
| 10 Gigabit Ethernet (seriell) | 550 m / - |
| Minimales Laserbandbreiten-Längenprodukt (EMB=Effective Modal Bandwidth) | 4700 MHz*km / - |
| Minimale OFL-Bandbreite | 3500 MHz*km / 500 MHz*km |
Specifications - Connector A
| Polish | PC |
| Insertion Loss, Max. | 0.35 dB |
| Note: | *IL in preconnectorized products is measured in the factory through two mated pairs. |
| Tensile Strength Jacketed Cable | 10 N |
| Durability | ≤ 0.2 dB change, 200 rematings, FOTP-21 |
| Boot Color | Aqua |
| Connector Type | MTP® (non-pinned) |
| Ferrule Material | Composite |
| Housing Color | Black |
| Housing Material | Composite |
| Boot Type | Individual |
Specifications - Connector B
| Polish | PC |
| Note: | *IL in preconnectorized products is measured in the factory through two mated pairs. |
| Tensile Strength Jacketed Cable | 10 N |
| Durability | ≤ 0.2 dB change, 200 rematings, FOTP-21 |
| Boot Color | Aqua |
| Connector Type | MTP® (non-pinned) |
| Ferrule Material | Composite |
| Housing Color | Black |
| Housing Material | Composite |
| Boot Type | Individual |
Pulling Grip - Connector B
| Tensile Strength | 200 N |
Dimensions
| Length | 8 m |
| Outer Diameter | 2 mm |
| Weight | 2 kg |
Ordering Information
| Packaging Method | Cardboard box |
| Units per Delivery | 1/1 |
| Shipping Height | 180 mm |
| Shipping Width | 250 mm |
| Shipping Depth | 380 mm |
Schlankes rundes 2-Faser-Verbindungskabel
Verbessert den Luftstrom und reduziert den Füllgrad im Kabelkanal
MTP® PRO Stecker
Ermöglicht Polaritäts- und Pin-Wechsel (mit Pin - ohne Pin) im Feld
Biegeunempfindliche Fasern
Ermöglicht engere Kabelbiegungen für Kabelführung und Überlängenablage, geringeres Risiko von Ausfallzeiten durch eingeklemmte oder geknickte Kabel
Corning® CleanAdvantage™ Technologie und optimierte Staubschutzkappen
Visuelle Inspektion und Reinigung vor der ersten Feldverbindung sind nicht nötig