G8990E4GPNCDX100F
EDGE™ MTP® Extender Trunk Bend-improved single-mode (OS2), MTP® Connector to MTP Connector, 144 fibres, with 33/60 inch legs, pulling grip one side, 100 ft
General Specifications
| Product Number | G8990E4GPNCDX100F |
| EAN Code | 4056418687124 |
| Flame rating | Plenum (OFNP) |
| Fibre category | Bend-improved Single-Mode (OS2) |
| Cable assembly type | EDGE™ Trunk |
| Environment | Indoor |
| Connector Assembly Type | MTP to MTP |
Standards
| Reaction to Fire | Cca, s1b, d1, a1 |
| RoHS | Free of hazardous substances according to RoHS 2011/65/EU |
| Approvals and Listings | NFPA 262, National Electrical Code® (NEC®), OFNP, CSA FT-6 |
Environmental Conditions
| Temperature range, operation | -10 °C to 60 °C |
Design
| Fibre count | 144 |
| Polarity | Extender, TIA-568 type-A |
| Fibre Type | Single-mode |
Mechanical Characteristics
| Max. tensile strength for installation | 660 N |
| Min. bend radius installation | 187.5 mm |
| Min. bend radius operation | 62.5 mm |
| Minimum conduit size with 18-in elbow | 77 mm |
Optical Characteristics
| Fibre code | G |
| Fibre Type | Single-mode ultra-bendable fibre |
| Fibre compliance | ITU-T G.652.D and ITU-T G.657.A1 |
| Fibre core diameter | 8.2 µm |
| Maximum Attenuation | 0.4 dB/km / 0.4 dB/km / 0.3 dB/km |
| Serial 1 gigabit ethernet | 5000 MHz*km / - / - |
| Serial 10 gigabit ethernet | 10000 MHz*km / - / 40000 MHz*km |
| Wavelengths | 1310 nm / 1383 nm / 1550 nm |
| Fibre category | OS2 |
Specifications - Connector A
| Insertion loss, max. | 0.35 dB |
| Boot colour | Black |
| Connector type | MTP® (pinned) |
| Ferrule material | Composite |
| Reflectance | < -65 dB |
Specifications - Connector B
| Insertion loss, max. | 0.35 dB |
| Boot colour | Black |
| Connector type | MTP® (non-pinned) |
| Ferrule material | Composite |
| Reflectance | < -65 dB |
Pulling grip - Connector A
| Pulling grip | Yes |
| Tensile strength | 440 N |
| Grip Outer Diameter | 56 mm |
Pulling grip - Connector B
| Min. Duct Size Diameter | 89 mm |
Dimensions
| Cable Weight | 122 kg/km |
Ordering Information
| Packaging method | Plastic reel |
| Reel diameter | 23.5 in |
| Reel width | 5 in |
| Units per delivery | 1/1 |
Furcation - Connector A
| Leg Length | 1524 mm -0 / +76mm |
| Furcation type | EDGE™ size 2, 20 mm x 20 mm x 108.6 mm |
| Leg colour | Yellow |
| Leg diameter | 2 mm |
| Leg count | 12 |
Furcation - Connector B
| Furcation type | EDGE™ size 2, 20 mm x 20 mm x 108.6 mm |
| Leg colour | Yellow |
| Leg diameter | 2 mm |
| Leg count | 12 |
| Leg Length | 838 mm -0 / +76mm |
Snap-in strain-relief clips
Provide easier cable management
Small outer diameter
Improves the cable tray fill ratio and allows for improved airflow
Low-loss connectivity
Enables system design flexibility
Bend-improved fibre
Allows tighter cable bends for slack storage and routing, less risk of downtime due to pinched or bent cables
Corning® CleanAdvantage™ technology and optimised dust cap
Eliminates the need for scoping and cleaning prior to initial field connection