GE5E508QLZDDU030M-VI
EDGE8® MTP® Trunk Cable 50 µm multimode (OM4), 8F MTP (pinned) Connector to 8F MTP (pinned) Connector, 8F, with 840 mm legs, pulling grip one side, 30 m
General Specifications
| Product Number | GE5E508QLZDDU030M-VI |
| Flame rating | LSZH/FRNC |
| Fibre category | 50 µm MM (OM4) |
| Cable assembly type | EDGE8® Trunk |
| Environment | Indoor |
| Cable Type | Interconnect |
Standards
| RoHS | Free of hazardous substances according to RoHS 2011/65/EU |
| Design And Test Criteria | ANSI/ICEA S-83-596 |
Environmental Conditions
| Temperature range, installation | 0 °C to 50 °C |
| Temperature range, operation | -10 °C to 60 °C |
| Temperature range, storage | -25 °C to 70 °C |
Design
| Fibre count | 8 |
| Outer jacket material | LSZH/FRNC |
| Polarity | Universal, TIA-568 type-B |
| Fibre Type | Multimode |
Mechanical Characteristics
| Tensile strength | 450 N |
| Nominal outer diameter | 4.5 mm |
| Crush resistance | 1000 N/10 cm |
| Min. bend radius installation | 90 mm |
| Min. bend radius operation | 45 mm |
Optical Characteristics
| Fibre code | T |
| Fibre name | G50/125 ULTRA-BEND 7.5 |
| Fibre Type | Multimode |
| Fibre core diameter | 50 µm |
| Minimum effective modal bandwidth (EMB) | 4700 MHz*km / - |
| Maximum Attenuation | 2.8 dB/km / 1.0 dB/km |
| Min. overfilled launch (OFL) bandwidth | 3500 MHz*km / 500 MHz*km |
| Serial 1 gigabit ethernet | 1100 MHz*km / 600 MHz*km |
| Serial 10 gigabit ethernet | 550 MHz*km / - |
| Typical attenuation | 2.4 dB/km / 0.8 dB/km |
| Wavelengths | 850 nm / 1300 nm |
| Induced Attenuation | For 7.5 mm radius < 0.2 db / - |
| Fibre category | OM4 |
Specifications - Connector A
| Polish | PC |
| Insertion loss, max. | 0.25 dB |
| Tensile strength jacketed cable | 44 N |
| Durability | ≤ 0.2 dB change, 200 rematings, FOTP-21 |
| Boot colour | Black |
| Connector type | MTP® (non-pinned) |
| Ferrule material | Composite |
| Housing material | Composite |
| Boot type | Individual |
| Reflectance | < -20 dB |
Specifications - Connector B
| Polish | PC |
| Insertion loss, max. | 0.25 dB |
| Tensile strength jacketed cable | 44 N |
| Durability | ≤ 0.2 dB change, 200 rematings, FOTP-21 |
| Boot colour | Black |
| Connector type | MTP® (non-pinned) |
| Ferrule material | Composite |
| Housing material | Composite |
| Boot type | Individual |
| Reflectance | < -20 dB |
Furcation - Connector A
| Leg Length | 840 mm |
| Leg colour | Erica violet |
| Leg diameter | 2 mm |
| Plug Type | Size 1 EDGE™ |
| Leg count | 1 |
| Plug Height | 14.7 mm |
| Plug Width | 14.7 mm |
| Plug Depth | 107.6 mm |
Furcation - Connector B
| Leg colour | Erica violet |
| Leg diameter | 2 mm |
| Plug Type | Size 1 EDGE™ |
| Leg count | 1 |
| Plug Height | 14.7 mm |
| Plug Width | 14.7 mm |
| Plug Depth | 107.6 mm |
| Leg Length | 840 mm |
Pulling grip - Connector A
| Pulling grip | Yes |
| Tensile strength | 400 N |
Pulling grip - Connector B
| Min. Duct Size Diameter | 64 mm |
Dimensions
| Length | 30 m |
Ordering Information
| Package contents | 2x EDGE™ clip size 1, test report |
| Packaging method | Cardboard box |
| Units per delivery | 1/1 |
| Shipping Height | 108 mm |
| Shipping Width | 530 mm |
| Shipping Depth | 530 mm |
Snap-in strain-relief clips
Provide easier cable management
Small outer diameter
Improves the cable tray fill ratio and allows for improved airflow
Low-loss connectivity
Enables system design flexibility
Bend-improved fibre
Allows tighter cable bends for slack storage and routing, less risk of downtime due to pinched or bent cables
Corning® CleanAdvantage™ technology and optimised dust cap
Eliminates the need for scoping and cleaning prior to initial field connection