GE5E5U8QLZDDU030M
EDGE8® MTP® Trunk Cable 50 µm multimode (OM4), 8F MTP (pinned) Connector to 8F MTP (pinned) Connector, 288F, with 840 mm legs, pulling grip one side, 30 m
Especificaciones generales
| Número del producto | GE5E5U8QLZDDU030M |
| Fibre category | 50 µm MM (OM4) |
| Cable assembly type | EDGE8® Trunk |
| Cable Type | Interconnect |
Standards
| Reaction to Fire | Cca, s1b, d1, a1 |
| RoHS | Free of hazardous substances according to RoHS 2011/65/EU |
| Design And Test Criteria | ANSI/ICEA S-83-596 |
| Intermateability | TIA/EIA-604-5 / TIA/EIA-604-5 |
Environmental Conditions
| Temperature range, installation | -5 °C a 50 °C |
| Temperature range, operation | -10 °C a 60 °C |
| Temperature range, storage | -25 °C a 70 °C |
Design
| Fibre count | 288 |
| Outer jacket material | LSZH/FRNC |
| Polarity | Universal, TIA-568 type-B |
| Fibre Type | Multimode |
Mechanical Characteristics
| Tensile strength | 440 N |
| Crush resistance | 1000 N/10 cm |
| Min. bend radius installation | 330 mm |
| Min. bend radius operation | 110 mm |
Características ópticas
| Código de la fibra | T |
| Código de opción de desempeño | 98 |
| Categoría de la fibra | OM4 |
| Tipo de fibra | Multimodo |
| Nombre de la fibra | 50 µm MM (OM4) |
| Atenuación máxima | 2.8 dB/km / 1.0 dB/km |
| Longitud de onda | 850 nm / 1300 nm |
| Conformidad de la fibra | IEC 60793-2-10 |
| Diámetro del núcleo de la fibra | 50 µm |
| Diámetro del revestimiento | 125 µm |
| Diámetro del recubrimiento | 242 µm |
| Ethernet 1 Gigabit serial | 1000 m / 600 m |
| Ethernet 10 Gigabit serial | 550 m / - |
| Ancho de banda modal efectiva mínima (EMB) | 4700 MHz*km / - |
| Anchura mínima de la banda de lanzamiento sobrecargado (OLF) | 3500 MHz*km / 500 MHz*km |
Specifications - Connector A
| Insertion loss, typical | 0.35 dB |
| Insertion loss, max. | 0.35 dB |
| Note: | *IL in preconnectorized products is measured in the factory through two mated pairs. |
| Tensile strength jacketed cable | 44 N |
| Durability | ≤ 0.2 dB change, 200 rematings, FOTP-21 |
| Keyed (security) | No |
| Boot colour | Black |
| Connector type | MTP® (pinned) |
| Ferrule material | Composite |
| Housing colour | Turquoise |
| Housing material | Composite |
| Boot type | Simplex |
| Reflectance | ≤ -20 dB |
Specifications - Connector B
| Insertion loss, typical | 0.35 dB |
| Insertion loss, max. | 0.35 dB |
| Note: | *IL in preconnectorized products is measured in the factory through two mated pairs. |
| Tensile strength jacketed cable | 44 N |
| Durability | ≤ 0.2 dB change, 200 rematings, FOTP-21 |
| Keyed (security) | No |
| Boot colour | Black |
| Connector type | MTP® (pinned) |
| Ferrule material | Composite |
| Housing colour | Turquoise |
| Housing material | Composite |
| Boot type | Simplex |
| Reflectance | ≤ -20 dB |
Furcation - Connector A
| Staggering legs per group | 6 |
| Leg Length | 840 mm -0 / +140mm |
| Leg diameter | 2 mm |
| Staggering increment | 100 mm |
| Shortest staggering leg length (mm) | 840 mm |
| Plug Type | Heat shrink |
| Leg count | 36 |
| Plug Height | 17.4 mm |
| Plug Width | 17.4 mm |
| Plug Depth | 170 mm |
Furcation - Connector B
| Leg diameter | 2 mm |
| Staggering increment | 100 mm |
| Shortest staggering leg length (mm) | 840 mm |
| Plug Type | Heat shrink |
| Plug Height | 17.4 mm |
| Plug Width | 17.4 mm |
| Plug Depth | 170 mm |
| Staggering legs per group | 6 |
| Leg Length | 840 mm -0 / +140mm |
Pulling grip - Connector A
| Pulling grip | Yes |
| Tensile strength | 440 N |
| Grip Outer Diameter | 52 mm |
Pulling grip - Connector B
| Tensile strength | 440 N |
| Min. Duct Size Diameter | 980 mm |
Dimensions
| Length | 30 m |
| Outer diameter | 17.4 mm |
Ordering Information
| Packaging method | Plastic reel |
| Package contents | 2x U-Clip 2nd generation, Test Report |
| Units per delivery | 1/1 |
Clips de alivio de tensión de fácil instalación
Gestión de cables más sencilla
Conectividad de baja pérdida
Mayor flexibilidad en el diseño del sistema
Pequeño diámetro exterior
Mejora la eficiencia de llenado de la bandeja portacables y permite una mejor circulación del aire
Fibra más resistente a curvaturas
Permite curvaturas más cerradas en el enrutamiento y en el almacenamiento de reserva del cable, reduciendo el riesgo de inactividad debido a cables pellizcados o doblados
Tecnología Corning® CleanAdvantage ™ y tapa antipolvo optimizada
Elimina la necesidad de examinar y de limpieza antes de la conexión inicial en el campo