012ZK4-13122ADE | MiniXtend® Cable, CT A-D(ZN)2Y, 1x12 fibres, CT, single-mode (E9 G.657.A1) - DIN VDE

General Specifications

Standards

Fibre Standards	TIA/EIA-492CAAB, IEC 60793-2-50 Type B1.3, ITU-T G.652.D, ITU-G.657.A1, ISO/IEC 11801 Ed.2.2
RoHS	Free of hazardous substances according to RoHS 2011/65/EU

Environmental Conditions

Temperature range, installation	-5 °C to 50 °C
Temperature range, operation	-20 °C to 60 °C
Temperature range, storage	-25 °C to 60 °C

Cable Design

Cable marking	Meter Handset D-Sine CORNING Year MINIXTEND(R) A-D(ZN)2Y 12F E9G.657.A1 CT1.7
Number of ripcords	1
Buffer tube diameter	1.75 mm
Cable marking method	Laser printing
Cable marking colour	White

Mechanical Specifications

Crush resistance	1000 N/10 cm
Max. tensile strength, short-term	80 N
Min. bend radius installation	80 mm
Min. bend radius operation	50 mm
Nominal outer diameter	2.5 mm

Optical Characteristics

Fibre code	Z
Performance option code	22
Fibre category	OS2
Fibre Type	Single-mode (OS2) / 250 µm
Fibre name	Bend-Improved Single-mode (OS2)
Maximum Attenuation	0.36 dB/km / 0.36 dB/km / 0.22 dB/km
Wavelengths	1310 nm / 1383 nm / 1550 nm
Fibre compliance	ITU-T G.652.D and ITU-T G.657.A1
Fibre core diameter	8.2 µm
Cladding diameter	125 µm
Coating diameter	242 µm
Dispersion @ 1550 nm	≤ 18 [ps/(nm*km)]
Dispersion @ 1625 nm	≤ 22 [ps/(nm*km)]
Cable cutoff wavelength	1260 nm
Mode-Field Diameter at 1310 nm	9.2 µm
PMD Link Design Value	≤ 0.04 ps/√km
PMD (Polarization Mode Dispersion) maximum individual fibre	≤ 0.1 ps/√km

Ordering Information

Maximum delivery length

6000 m

Improved cable and fibre density

Reduced cable diameter for installation in micro ducts with 4mm minimum inner diameter

Fully-dielectric

No grounding required

Optimised for air-assisted install in microducts

Capable of installation distances greater than 2000 m (6560 ft) at speeds up to 150 m/min (490 ft/min)

SMF-28e+®according to ITU-T G.652.D

Transmission security, low attenuation and polarization mode dispersion