text.skipToContent text.skipToNavigation

D10201JB49R050M

Evolv® ROC™ Drop with Pushlok® Technology  1F Pushlok to LC Simplex,Dielectric, 50 m, bulk packaging

Contact Distributor for Lead Time

You might also be interested in
General Specifications
Product Number D10201JB49R050M
Cable Type ROC™ Drop
Assembly Insertion Loss ≤ 0.4 dB
Connector Assembly Type Pushlok LC Simplex
Packaging Bulk Pack
Standards
RoHS Free of hazardous substances according to RoHS 2011/65/EU
Design
Fibre count 1
Mechanical Characteristics
Nominal outer diameter 0 mm 
Specifications - Connector A
Insertion loss, max. 0.4 dB
Connector type Pushlok®
Reflectance ≤ -65 dB
Specifications - Connector B
Insertion loss, max. 0.4 dB
Connector type LC simplex
Reflectance ≤ -65 dB
Furcation - Connector A
Leg Length 0 mm
Furcation - Connector B
Leg Length 0 mm
Dimensions
Length 0 mm
Ordering Information
Packaging method Box
Hardened connector technology
Reduced diameter Pushlok™ connector
Reduced optimised cable cross section
Smaller profile and bend radius; flexibility allows for increased slack storage capacity in existing optical network terminals (ONTs), pedestals, and handholes
Robust design
Designed for rapid connection to external flush-mounted bulkhead adapters on terminals or closures

Flexible connector offerings

Dual-ended or pigtailed versions to accommodate any ONT interface Hybrid assemblies with hardened connector (terminal) to SC APC (ONT) are available with both OptiTap and Pushlok variants 1F small cell variants with a Pushlok hardened connector to LC or Uniboot
Versatile installation environments
Aerial: dielectric, self-supporting at 40 lbs installation tension at 150 ft (NESC Heavy), 255 ft (NESC Medium) or 330 ft (NESC Light)
Direct-buried: toneable for easy locating
Duct: integral pulling eye/connector cap designed for 100 lb maximum pulling tension; Pushlok connector is suitable for 13 mm inner diameter duct