G7575M6TLZDDU010M
EDGE8® Hybrid Trunk MTP® (NP) to MTP (NP), 840/840 mm Legs, 216F, Non-armoured EDGE LSZH, 50 µm MM (OM3), Pulling Grip One End, 10 m
General Specifications
| Product Number | G7575M6TLZDDU010M |
| Fibre category | 50 µm MM (OM3) |
| Cable assembly type | EDGE™ Trunk |
| Pulling grip | Yes |
Standards
| Reaction to Fire | Cca, s1b, d1, a1 |
| RoHS | Free of hazardous substances according to RoHS 2011/65/EU |
| Approvals and Listings | NFPA 262, National Electrical Code® (NEC®), OFNP, CSA FT-6 |
Design
| Fibre count | 216 |
| Polarity | Universal, TIA-568 type-B |
Mechanical Characteristics
| Nominal outer diameter | 14 mm |
| Max. tensile strength for installation | 440 N |
| Min. bend radius installation | 210 mm |
| Min. bend radius operation | 70 mm |
Optical Characteristics
| Fibre code | T |
| Performance option code | 88 |
| Fibre category | OM3 |
| Fibre Type | Multimode |
| Fibre name | 50 µm MM (OM3) |
| Maximum Attenuation | 3.8 dB/km / 2.0 dB/km |
| Wavelengths | 850 nm / 1300 nm |
| Fibre compliance | IEC 60793-2-10 |
| Fibre core diameter | 50 µm |
| Cladding diameter | 125 µm |
| Coating diameter | 242 µm |
| Serial 1 gigabit ethernet | 750 m / 600 m |
| Serial 10 gigabit ethernet | 300 m / - |
| Minimum effective modal bandwidth (EMB) | 2000 MHz*km / - |
| Min. overfilled launch (OFL) bandwidth | 1500 MHz*km / 500 MHz*km |
Specifications - Connector A
| Reflectance, typical | ≤ -55 dB |
| Insertion loss, max. | 0.35 dB |
| Note: | *IL in preconnectorized products is measured in the factory through two mated pairs. |
| Connector type | MTP® (non-pinned) |
| Ferrule material | Composite |
Specifications - Connector B
| Insertion loss, max. | 0.35 dB |
| Note: | *IL in preconnectorized products is measured in the factory through two mated pairs. |
| Connector type | MTP® (non-pinned) |
| Ferrule material | Composite |
Furcation - Connector A
| Leg Length | 838 mm -0 / +76mm |
| Leg colour | Turquoise |
| Leg diameter | 2 mm |
Furcation - Connector B
| Leg colour | Turquoise |
| Leg diameter | 2 mm |
| Leg Length | 838 mm -0 / +76mm |
Pulling grip - Connector A
| Pulling grip | Yes |
| Tensile strength | 440 N |
| Grip Outer Diameter | 38.1 mm |
Pulling grip - Connector B
| Min. Duct Size Diameter | 50 mm |
Dimensions
| Length | 10 m |
| Cable Weight | 194.7 kg/km |
Ordering Information
| Units per delivery | 1/1 |
Snap-in strain-relief clips
Provide easier cable management
Small outer diameter
Improves the cable tray fill ratio and allows for improved airflow
Low-loss connectivity
Enables system design flexibility
Bend-improved fibre
Allows tighter cable bends for slack storage and routing, less risk of downtime due to pinched or bent cables
Corning® CleanAdvantage™ technology and optimised dust cap
Eliminates the need for scoping and cleaning prior to initial field connection