ZE5E5U8TLZDDU030M
EDGE8® MTP® Trunk Cable 50 µm multimode (OM3), 8F MTP (pinned) Connector to 8F MTP (pinned) Connector, 288F, with 840 mm legs, tool-less no pulling grip, 30 m
通用规范
| 产品编码 | ZE5E5U8TLZDDU030M |
| Cable assembly type | EDGE8® Trunk |
| Cable Type | Interconnect |
Standards
| Reaction to Fire | Cca, s1b, d1, a1 |
| RoHS | Free of hazardous substances according to RoHS 2011/65/EU |
| Design And Test Criteria | ANSI/ICEA S-83-596 |
Environmental Conditions
| Temperature range, installation | -5 °C - 50 °C |
| Temperature range, operation | -10 °C - 60 °C |
| Temperature range, storage | -25 °C - 70 °C |
Design
| Fibre count | 288 |
| Outer jacket material | LSZH/FRNC |
Mechanical Characteristics
| Tensile strength | 440 N |
| Crush resistance | 1000 N/10 cm |
| Min. bend radius installation | 330 mm |
Características ópticas
| Código de la fibra | T |
| Código de opción de desempeño | 88 |
| Categoría de la fibra | OM3 |
| Tipo de fibra | Multimodo |
| Nombre de la fibra | 50 µm MM (OM3) |
| Atenuación máxima | 2.8 dB/km / 1.0 dB/km |
| Longitud de onda | 850 nm / 1300 nm |
| Conformidad de la fibra | IEC 60793-2-10 |
| Diámetro del núcleo de la fibra | 50 µm |
| Diámetro del revestimiento | 125 µm |
| Diámetro del recubrimiento | 242 µm |
| Ethernet 1 Gigabit serial | 750 m / 600 m |
| Ethernet 10 Gigabit serial | 300 m / - |
| Ancho de banda modal efectiva mínima (EMB) | 2000 MHz*km / - |
| Anchura mínima de la banda de lanzamiento sobrecargado (OLF) | 1500 MHz*km / 500 MHz*km |
Specifications - Connector A
| Insertion loss, typical | 0.35 dB |
| Insertion loss, max. | 0.35 dB |
| Note: | *IL in preconnectorized products is measured in the factory through two mated pairs. |
| Tensile strength jacketed cable | 44 N |
| Durability | ≤ 0.2 dB change, 200 rematings, FOTP-21 |
| Keyed (security) | No |
| Boot colour | Black |
| Connector type | MTP® (pinned) |
| Ferrule material | Composite |
| Housing colour | Turquoise |
| Housing material | Composite |
| Boot type | Individual |
| Reflectance | < -20 dB |
Specifications - Connector B
| Insertion loss, typical | 0.35 dB |
| Insertion loss, max. | 0.35 dB |
| Note: | *IL in preconnectorized products is measured in the factory through two mated pairs. |
| Tensile strength jacketed cable | 44 N |
| Durability | ≤ 0.2 dB change, 200 rematings, FOTP-21 |
| Keyed (security) | No |
| Boot colour | Black |
| Connector type | MTP® (pinned) |
| Ferrule material | Composite |
| Housing colour | Turquoise |
| Housing material | Composite |
| Boot type | Individual |
| Reflectance | ≤ -20 dB |
Furcation - Connector A
| Staggering legs per group | 6 |
| Leg Length | 840 mm -0 / +140mm |
| Leg diameter | 2 mm |
| Staggering increment | 100 mm |
| Shortest staggering leg length (mm) | 840 mm |
| Plug Type | Heat shrink |
| Leg count | 36 |
| Plug Height | 17.4 mm |
| Plug Width | 17.4 mm |
| Plug Depth | 170 mm |
Furcation - Connector B
| Leg diameter | 2 mm |
| Staggering increment | 100 mm |
| Shortest staggering leg length (mm) | 840 mm |
| Plug Type | Heat shrink |
| Leg count | 36 |
| Plug Height | 17.4 mm |
| Plug Width | 17.4 mm |
| Plug Depth | 170 mm |
| Staggering legs per group | 6 |
| Leg Length | 840 mm |
Pulling grip - Connector A
| Pulling grip | No |
Dimensions
| Length | 30 m |
| Outer diameter | 17.4 mm |
Ordering Information
| Package contents | 2x U-Clip 2nd generation, Test Report |
| Packaging method | Plastic reel |
| Units per delivery | 1/1 |
Snap-in strain-relief clips
Provide easier cable management
Small outer diameter
Improves the cable tray fill ratio and allows for improved airflow
Low-loss connectivity
Enables system design flexibility
Bend-improved fiber
Allows tighter cable bends for slack storage and routing, less risk of downtime due to pinched or bent cables
Tecnología Corning® CleanAdvantage ™ y tapa antipolvo optimizada
Elimina la necesidad de examinar y de limpieza antes de la conexión inicial en el campo