M1T112ZB4EXT002F
Evolv® Multifibre Pushlok® Assembly OptiTip Nonpinned to Multifibre Pushlok® Female compatibility extender, 12 fibres, SST Drop Dielectric, 2 FT, individual packaging
General Specifications
| Product Number | M1T112ZB4EXT002F |
| Cable assembly type | OptiTip™ to Multifiber Pushlok® Compatibility Extender |
| Environment | Outdoor |
| Cable Type | SST-Drop™ dielectric |
| Packaging | Individual Pack |
| Termination | Both ends |
Standards
| RoHS | Free of hazardous substances according to RoHS 2011/65/EU |
Environmental Conditions
| Temperature range, installation | -30 °C to 70 °C |
| Temperature range, operation | -40 °C to 70 °C |
| Temperature range, storage | -40 °C to 70 °C |
Design
| Fibre count | 12 |
| Fibre Type | Single-mode |
Mechanical Characteristics
| Max. tensile strength, short-term | 1350 N |
| Max. tensile strength, long-term | 400 N |
| Max. tensile strength for installation | 1350 N |
| Min. bend radius installation | 135 mm |
| Cold mate/demate | -40 °C |
| Axial pull, plug to cable, through the dust cap | 222.41 N (50 lb) in axial pull with load applied to the dust cap |
Specifications - Connector A
| Insertion loss, max. | 0.35 dB |
| Connector type | OptiTip® |
| Reflectance | ≤ -65 dB |
Specifications - Connector B
| Insertion loss, max. | 0.35 dB |
| Connector type | Multifbre Pushlok® |
| Reflectance | ≤ -65 dB |
Pulling grip - Connector A
| Grip Outer Diameter | 0.69 in |
Pulling grip - Connector B
| Grip Outer Diameter | 0.48 in |
Ordering Information
| Units per delivery | 1/1 |